aboutsummaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)Author
2014-04-07proc: show mnt_id in /proc/pid/fdinfoAndrey Vagin
Currently we don't have a way how to determing from which mount point file has been opened. This information is required for proper dumping and restoring file descriptos due to presence of mount namespaces. It's possible, that two file descriptors are opened using the same paths, but one fd references mount point from one namespace while the other fd -- from other namespace. $ ls -l /proc/1/fd/1 lrwx------ 1 root root 64 Mar 19 23:54 /proc/1/fd/1 -> /dev/null $ cat /proc/1/fdinfo/1 pos: 0 flags: 0100002 mnt_id: 16 $ cat /proc/1/mountinfo | grep ^16 16 32 0:4 / /dev rw,nosuid shared:2 - devtmpfs devtmpfs rw,size=1013356k,nr_inodes=253339,mode=755 Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Rob Landley <rob@landley.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07zram: propagate error to userMinchan Kim
When we initialized zcomp with single, we couldn't change max_comp_streams without zram reset but current interface doesn't show any error to user and even it changes max_comp_streams's value without any effect so it would make user very confusing. This patch prevents max_comp_streams's change when zcomp was initialized as single zcomp and emit the error to user(ex, echo). [akpm@linux-foundation.org: don't return with the lock held, per Sergey] [fengguang.wu@intel.com: fix coccinelle warnings] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07zram: make compression algorithm selection possibleSergey Senozhatsky
Add and document `comp_algorithm' device attribute. This attribute allows to show supported compression and currently selected compression algorithms: cat /sys/block/zram0/comp_algorithm [lzo] lz4 and change selected compression algorithm: echo lzo > /sys/block/zram0/comp_algorithm Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07zram: add multi stream functionalitySergey Senozhatsky
Existing zram (zcomp) implementation has only one compression stream (buffer and algorithm private part), so in order to prevent data corruption only one write (compress operation) can use this compression stream, forcing all concurrent write operations to wait for stream lock to be released. This patch changes zcomp to keep a compression streams list of user-defined size (via sysfs device attr). Each write operation still exclusively holds compression stream, the difference is that we can have N write operations (depending on size of streams list) executing in parallel. See TEST section later in commit message for performance data. Introduce struct zcomp_strm_multi and a set of functions to manage zcomp_strm stream access. zcomp_strm_multi has a list of idle zcomp_strm structs, spinlock to protect idle list and wait queue, making it possible to perform parallel compressions. The following set of functions added: - zcomp_strm_multi_find()/zcomp_strm_multi_release() find and release a compression stream, implement required locking - zcomp_strm_multi_create()/zcomp_strm_multi_destroy() create and destroy zcomp_strm_multi zcomp ->strm_find() and ->strm_release() callbacks are set during initialisation to zcomp_strm_multi_find()/zcomp_strm_multi_release() correspondingly. Each time zcomp issues a zcomp_strm_multi_find() call, the following set of operations performed: - spin lock strm_lock - if idle list is not empty, remove zcomp_strm from idle list, spin unlock and return zcomp stream pointer to caller - if idle list is empty, current adds itself to wait queue. it will be awaken by zcomp_strm_multi_release() caller. zcomp_strm_multi_release(): - spin lock strm_lock - add zcomp stream to idle list - spin unlock, wake up sleeper Minchan Kim reported that spinlock-based locking scheme has demonstrated a severe perfomance regression for single compression stream case, comparing to mutex-based (see https://lkml.org/lkml/2014/2/18/16) base spinlock mutex ==Initial write ==Initial write ==Initial write records: 5 records: 5 records: 5 avg: 1642424.35 avg: 699610.40 avg: 1655583.71 std: 39890.95(2.43%) std: 232014.19(33.16%) std: 52293.96 max: 1690170.94 max: 1163473.45 max: 1697164.75 min: 1568669.52 min: 573429.88 min: 1553410.23 ==Rewrite ==Rewrite ==Rewrite records: 5 records: 5 records: 5 avg: 1611775.39 avg: 501406.64 avg: 1684419.11 std: 17144.58(1.06%) std: 15354.41(3.06%) std: 18367.42 max: 1641800.95 max: 531356.78 max: 1706445.84 min: 1593515.27 min: 488817.78 min: 1655335.73 When only one compression stream available, mutex with spin on owner tends to perform much better than frequent wait_event()/wake_up(). This is why single stream implemented as a special case with mutex locking. Introduce and document zram device attribute max_comp_streams. This attr shows and stores current zcomp's max number of zcomp streams (max_strm). Extend zcomp's zcomp_create() with `max_strm' parameter. `max_strm' limits the number of zcomp_strm structs in compression backend's idle list (max_comp_streams). max_comp_streams used during initialisation as follows: -- passing to zcomp_create() max_strm equals to 1 will initialise zcomp using single compression stream zcomp_strm_single (mutex-based locking). -- passing to zcomp_create() max_strm greater than 1 will initialise zcomp using multi compression stream zcomp_strm_multi (spinlock-based locking). default max_comp_streams value is 1, meaning that zram with single stream will be initialised. Later patch will introduce configuration knob to change max_comp_streams on already initialised and used zcomp. TEST iozone -t 3 -R -r 16K -s 60M -I +Z test base 1 strm (mutex) 3 strm (spinlock) ----------------------------------------------------------------------- Initial write 589286.78 583518.39 718011.05 Rewrite 604837.97 596776.38 1515125.72 Random write 584120.11 595714.58 1388850.25 Pwrite 535731.17 541117.38 739295.27 Fwrite 1418083.88 1478612.72 1484927.06 Usage example: set max_comp_streams to 4 echo 4 > /sys/block/zram0/max_comp_streams show current max_comp_streams (default value is 1). cat /sys/block/zram0/max_comp_streams Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07zram: document failed_reads, failed_writes statsSergey Senozhatsky
Document `failed_reads' and `failed_writes' device attributes. Remove info about `discard' - there is no such zram attr. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07zram: move zram size warning to documentationSergey Senozhatsky
Move zram warning about disksize and size of memory correlation to zram documentation. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07memcg: rename high level charging functionsMichal Hocko
mem_cgroup_newpage_charge is used only for charging anonymous memory so it is better to rename it to mem_cgroup_charge_anon. mem_cgroup_cache_charge is used for file backed memory so rename it to mem_cgroup_charge_file. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07res_counter: remove interface for locked charging and unchargingDavid Rientjes
The res_counter_{charge,uncharge}_locked() variants are not used in the kernel outside of the resource counter code itself, so remove the interface. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Tim Hockin <thockin@google.com> Cc: Christoph Lameter <cl@linux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07mm: introduce vm_ops->map_pages()Kirill A. Shutemov
Here's new version of faultaround patchset. It took a while to tune it and collect performance data. First patch adds new callback ->map_pages to vm_operations_struct. ->map_pages() is called when VM asks to map easy accessible pages. Filesystem should find and map pages associated with offsets from "pgoff" till "max_pgoff". ->map_pages() is called with page table locked and must not block. If it's not possible to reach a page without blocking, filesystem should skip it. Filesystem should use do_set_pte() to setup page table entry. Pointer to entry associated with offset "pgoff" is passed in "pte" field in vm_fault structure. Pointers to entries for other offsets should be calculated relative to "pte". Currently VM use ->map_pages only on read page fault path. We try to map FAULT_AROUND_PAGES a time. FAULT_AROUND_PAGES is 16 for now. Performance data for different FAULT_AROUND_ORDER is below. TODO: - implement ->map_pages() for shmem/tmpfs; - modify get_user_pages() to be able to use ->map_pages() and implement mmap(MAP_POPULATE|MAP_NONBLOCK) on top. ========================================================================= Tested on 4-socket machine (120 threads) with 128GiB of RAM. Few real-world workloads. The sweet spot for FAULT_AROUND_ORDER here is somewhere between 3 and 5. Let's say 4 :) Linux build (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 283,301,572 247,151,987 212,215,789 204,772,882 199,568,944 194,703,779 193,381,485 time, seconds 151.227629483 153.920996480 151.356125472 150.863792049 150.879207877 151.150764954 151.450962358 Linux rebuild (make -j60) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 5,396,854 4,148,444 2,855,286 2,577,282 2,361,957 2,169,573 2,112,643 time, seconds 27.404543757 27.559725591 27.030057426 26.855045126 26.678618635 26.974523490 26.761320095 Git test suite (make -j60 test) FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 minor-faults 129,591,823 99,200,751 66,106,718 57,606,410 51,510,808 45,776,813 44,085,515 time, seconds 66.087215026 64.784546905 64.401156567 65.282708668 66.034016829 66.793780811 67.237810413 Two synthetic tests: access every word in file in sequential/random order. It doesn't improve much after FAULT_AROUND_ORDER == 4. Sequential access 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 4,195,437 2,098,275 525,068 262,251 131,170 32,856 8,282 time, seconds 7.250461742 6.461711074 5.493859139 5.488488147 5.707213983 5.898510832 5.109232856 8 threads minor-faults 33,557,540 16,892,728 4,515,848 2,366,999 1,423,382 442,732 142,339 time, seconds 16.649304881 9.312555263 6.612490639 6.394316732 6.669827501 6.75078944 6.371900528 32 threads minor-faults 134,228,222 67,526,810 17,725,386 9,716,537 4,763,731 1,668,921 537,200 time, seconds 49.164430543 29.712060103 12.938649729 10.175151004 11.840094583 9.594081325 9.928461797 60 threads minor-faults 251,687,988 126,146,952 32,919,406 18,208,804 10,458,947 2,733,907 928,217 time, seconds 86.260656897 49.626551828 22.335007632 17.608243696 16.523119035 16.339489186 16.326390902 120 threads minor-faults 503,352,863 252,939,677 67,039,168 35,191,827 19,170,091 4,688,357 1,471,862 time, seconds 124.589206333 79.757867787 39.508707872 32.167281632 29.972989292 28.729834575 28.042251622 Random access 1GiB file 1 thread minor-faults 262,636 132,743 34,369 17,299 8,527 3,451 1,222 time, seconds 15.351890914 16.613802482 16.569227308 15.179220992 16.557356122 16.578247824 15.365266994 8 threads minor-faults 2,098,948 1,061,871 273,690 154,501 87,110 25,663 7,384 time, seconds 15.040026343 15.096933500 14.474757288 14.289129964 14.411537468 14.296316837 14.395635804 32 threads minor-faults 8,390,734 4,231,023 1,054,432 528,847 269,242 97,746 26,881 time, seconds 20.430433109 21.585235358 22.115062928 14.872878951 14.880856305 14.883370649 14.821261690 60 threads minor-faults 15,733,258 7,892,809 1,973,393 988,266 594,789 164,994 51,691 time, seconds 26.577302548 25.692397770 18.728863715 20.153026398 21.619101933 17.745086260 17.613215273 120 threads minor-faults 31,471,111 15,816,616 3,959,209 1,978,685 1,008,299 264,635 96,010 time, seconds 41.835322703 40.459786095 36.085306105 35.313894834 35.814445675 36.552633793 34.289210594 Touch only one page in page table in 16GiB file FAULT_AROUND_ORDER Baseline 1 3 4 5 7 9 1 thread minor-faults 8,372 8,324 8,270 8,260 8,249 8,239 8,237 time, seconds 0.039892712 0.045369149 0.051846126 0.063681685 0.079095975 0.17652406 0.541213386 8 threads minor-faults 65,731 65,681 65,628 65,620 65,608 65,599 65,596 time, seconds 0.124159196 0.488600638 0.156854426 0.191901957 0.242631486 0.543569456 1.677303984 32 threads minor-faults 262,388 262,341 262,285 262,276 262,266 262,257 263,183 time, seconds 0.452421421 0.488600638 0.565020946 0.648229739 0.789850823 1.651584361 5.000361559 60 threads minor-faults 491,822 491,792 491,723 491,711 491,701 491,691 491,825 time, seconds 0.763288616 0.869620515 0.980727360 1.161732354 1.466915814 3.04041448 9.308612938 120 threads minor-faults 983,466 983,655 983,366 983,372 983,363 984,083 984,164 time, seconds 1.595846553 1.667902182 2.008959376 2.425380942 2.941368804 5.977807890 18.401846125 This patch (of 2): Introduce new vm_ops callback ->map_pages() and uses it for mapping easy accessible pages around fault address. On read page fault, if filesystem provides ->map_pages(), we try to map up to FAULT_AROUND_PAGES pages around page fault address in hope to reduce number of minor page faults. We call ->map_pages first and use ->fault() as fallback if page by the offset is not ready to be mapped (cold page cache or something). Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Ning Qu <quning@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-06Merge tag 'modules-next-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "Nothing major: the stricter permissions checking for sysfs broke a staging driver; fix included. Greg KH said he'd take the patch but hadn't as the merge window opened, so it's included here to avoid breaking build" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: staging: fix up speakup kobject mode Use 'E' instead of 'X' for unsigned module taint flag. VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms. kallsyms: fix percpu vars on x86-64 with relocation. kallsyms: generalize address range checking module: LLVMLinux: Remove unused function warning from __param_check macro Fix: module signature vs tracepoints: add new TAINT_UNSIGNED_MODULE module: remove MODULE_GENERIC_TABLE module: allow multiple calls to MODULE_DEVICE_TABLE() per module module: use pr_cont
2014-04-05Merge tag 'dm-3.15-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper changes from Mike Snitzer: - Fix dm-cache corruption caused by discard_block_size > cache_block_size - Fix a lock-inversion detected by LOCKDEP in dm-cache - Fix a dangling bio bug in the dm-thinp target's process_deferred_bios error path - Fix corruption due to non-atomic transaction commit which allowed a metadata superblock to be written before all other metadata was successfully written -- this is common to all targets that use the persistent-data library's transaction manager (dm-thinp, dm-cache and dm-era). - Various small cleanups in the DM core - Add the dm-era target which is useful for keeping track of which blocks were written within a user defined period of time called an 'era'. Use cases include tracking changed blocks for backup software, and partially invalidating the contents of a cache to restore cache coherency after rolling back a vendor snapshot. - Improve the on-disk layout of multithreaded writes to the dm-thin-pool by splitting the pool's deferred bio list to be a per-thin device list and then sorting that list using an rb_tree. The subsequent read throughput of the data written via multiple threads improved by ~70%. - Simplify the multipath target's handling of queuing IO by pushing requests back to the request queue rather than queueing the IO internally. * tag 'dm-3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (24 commits) dm cache: fix a lock-inversion dm thin: sort the per thin deferred bios using an rb_tree dm thin: use per thin device deferred bio lists dm thin: simplify pool_is_congested dm thin: fix dangling bio in process_deferred_bios error path dm mpath: print more useful warnings in multipath_message() dm-mpath: do not activate failed paths dm mpath: remove extra nesting in map function dm mpath: remove map_io() dm mpath: reduce memory pressure when requeuing dm mpath: remove process_queued_ios() dm mpath: push back requests instead of queueing dm table: add dm_table_run_md_queue_async dm mpath: do not call pg_init when it is already running dm: use RCU_INIT_POINTER instead of rcu_assign_pointer in __unbind dm: stop using bi_private dm: remove dm_get_mapinfo dm: make dm_table_alloc_md_mempools static dm: take care to copy the space map roots before locking the superblock dm transaction manager: fix corruption due to non-atomic transaction commit ...
2014-04-05Merge tag 'iommu-updates-v3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU upates from Joerg Roedel: "This time a few more updates queued up. - Rework VT-d code to support ACPI devices - Improvements for memory and PCI hotplug support in the VT-d driver - Device-tree support for OMAP IOMMU - Convert OMAP IOMMU to use devm_* interfaces - Fixed PASID support for AMD IOMMU - Other random cleanups and fixes for OMAP, ARM-SMMU and SHMOBILE IOMMU Most of the changes are in the VT-d driver because some rework was necessary for better hotplug and ACPI device support" * tag 'iommu-updates-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (75 commits) iommu/vt-d: Fix error handling in ANDD processing iommu/vt-d: returning free pointer in get_domain_for_dev() iommu/vt-d: Only call dmar_acpi_dev_scope_init() if DRHD units present iommu/vt-d: Check for NULL pointer in dmar_acpi_dev_scope_init() iommu/amd: Fix logic to determine and checking max PASID iommu/vt-d: Include ACPI devices in iommu=pt iommu/vt-d: Finally enable translation for non-PCI devices iommu/vt-d: Remove to_pci_dev() in intel_map_page() iommu/vt-d: Remove pdev from intel_iommu_attach_device() iommu/vt-d: Remove pdev from iommu_no_mapping() iommu/vt-d: Make domain_add_dev_info() take struct device iommu/vt-d: Make domain_remove_one_dev_info() take struct device iommu/vt-d: Rename 'hwdev' variables to 'dev' now that that's the norm iommu/vt-d: Remove some pointless to_pci_dev() calls iommu/vt-d: Make get_valid_domain_for_dev() take struct device iommu/vt-d: Make iommu_should_identity_map() take struct device iommu/vt-d: Handle RMRRs for non-PCI devices iommu/vt-d: Make get_domain_for_dev() take struct device iommu/vt-d: Make domain_context_mapp{ed,ing}() take struct device iommu/vt-d: Make device_to_iommu() cope with non-PCI devices ...
2014-04-05Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon updates from Jean Delvare: "This includes a number of driver conversions to devm_hwmon_device_register_with_groups, a few cleanups, and support for the ITE IT8623E" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (it87) Add support for IT8623E hwmon: (it87) Fix IT8603E define name hwmon: (lm90) Convert to use hwmon_device_register_with_groups hwmon: (lm90) Create all sysfs groups in one call hwmon: (lm90) Always use the dev variable in the probe function hwmon: (lm90) Create most optional attributes with sysfs_create_group hwmon: Avoid initializing the same field twice hwmon: (pc87360) Avoid initializing the same field twice hwmon: (lm80) Convert to use devm_hwmon_device_register_with_groups hwmon: (adm1021) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm63) Avoid initializing the same field twice hwmon: (lm63) Convert to use devm_hwmon_device_register_with_groups hwmon: (lm63) Create all sysfs groups in one call hwmon: (lm63) Introduce 'dev' variable to point to client->dev hwmon: (lm63) Add additional sysfs group for temp2_type attribute hwmon: (f71805f) Fix author's address
2014-04-05Merge tag 'clk-for-linus-3.15' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clock framework changes from Mike Turquette: "The clock framework changes for 3.15 look similar to past pull requests. Mostly clock driver updates, more Device Tree support in the form of common functions useful across platforms and a handful of features and fixes to the framework core" * tag 'clk-for-linus-3.15' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: shmobile: fix setting paretn clock rate clk: shmobile: rcar-gen2: fix lb/sd0/sd1/sdh clock parent to pll1 clk: Fix minor errors in of_clk_init() function comments clk: reverse default clk provider initialization order in of_clk_init() clk: sirf: update copyright years to 2014 clk: mmp: try to use closer one when do round rate clk: mmp: fix the wrong calculation formula clk: mmp: fix wrong mask when calculate denominator clk: st: Adds quadfs clock binding clk: st: Adds clockgen-vcc and clockgen-mux clock binding clk: st: Adds clockgen clock binding clk: st: Adds divmux and prediv clock binding clk: st: Support for A9 MUX clocks clk: st: Support for ClockGenA9/DDR/GPU clk: st: Support for QUADFS inside ClockGenB/C/D/E/F clk: st: Support for VCC-mux and MUX clocks clk: st: Support for PLLs inside ClockGenA(s) clk: st: Support for DIVMUX and PreDiv Clocks clk: support hardware-specific debugfs entries clk: s2mps11: Use of_get_child_by_name ...
2014-04-05Merge tag 'pwm/for-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The legacy HAVE_PWM Kconfig symbol is finally being retired. Thanks a lot to Sascha Hauer for doing that. Three new drivers are added: Freescale FTM, Cirrus Logic CLPS711X and Intel Low Power Subsystem. An assortment of fixes and cleanups rounds things off for this release cycle" * tag 'pwm/for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: pxa: Constify OF match table pwm: pxa: Fix typo "pwm" -> "PWM" Revert "pwm: pxa: Use of_match_ptr()" pwm: add support for Intel Low Power Subsystem PWM pwm: Add CLPS711X PWM support pwm: atmel: correct CDTY calculation pwm: atmel: Fix polarity handling Documentation: Add device tree bindings for Freescale FTM PWM. pwm: Add Freescale FTM PWM driver support pwm: pxa: Use of_match_ptr() pwm: samsung: Use SIMPLE_DEV_PM_OPS macro pwm: renesas-tpu: Add dependency on HAS_IOMEM pwm: Remove obsolete HAVE_PWM Kconfig symbol
2014-04-05Merge tag 'tags/cleanup2-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...
2014-04-05Merge tag 'drivers-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver changes from Arnd Bergmann: "These changes are mostly for ARM specific device drivers that either don't have an upstream maintainer, or that had the maintainer ask us to pick up the changes to avoid conflicts. A large chunk of this are clock drivers (bcm281xx, exynos, versatile, shmobile), aside from that, reset controllers for STi as well as a large rework of the Marvell Orion/EBU watchdog driver are notable" * tag 'drivers-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) Revert "dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac." Revert "net: stmmac: Add SOCFPGA glue driver" ARM: shmobile: r8a7791: Fix SCIFA3-5 clocks ARM: STi: Add reset controller support to mach-sti Kconfig drivers: reset: stih416: add softreset controller drivers: reset: stih415: add softreset controller drivers: reset: Reset controller driver for STiH416 drivers: reset: Reset controller driver for STiH415 drivers: reset: STi SoC system configuration reset controller support dts: socfpga: Add sysmgr node so the gmac can use to reference dts: socfpga: Add support for SD/MMC on the SOCFPGA platform reset: Add optional resets and stubs ARM: shmobile: r7s72100: fix bus clock calculation Power: Reset: Generalize qnap-poweroff to work on Synology devices. dts: socfpga: Update clock entry to support multiple parents ARM: socfpga: Update socfpga_defconfig dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. net: stmmac: Add SOCFPGA glue driver watchdog: orion_wdt: Use %pa to print 'phys_addr_t' drivers: cci: Export CCI PMU revision ...
2014-04-05Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-04-05Merge tag 'soc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "Lots of changes specific to one of the SoC families. Some that stick out are: - mach-qcom gains new features, most importantly SMP support for the newer chips (Stephen Boyd, Rohit Vaswani) - mvebu gains support for three new SoCs: Armada 375, 380 and 385 (Thomas Petazzoni and Free-electrons team) - SMP support for Rockchips (Heiko Stübner) - Lots of i.MX changes (Shawn Guo) - Added support for BCM5301x SoC (Hauke Mehrtens) - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn and Sebastian Hesselbarth doing the final part of a long journey) - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd Bergmann)" * tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits) ARM: sunxi: Select HAVE_ARM_ARCH_TIMER ARM: cache-tauros2: remove ARMv6 code ARM: mvebu: don't select CONFIG_NEON ARM: davinci: fix DT booting with default defconfig ARM: configs: bcm_defconfig: enable bcm590xx regulator support ARM: davinci: remove tnetv107x support MAINTAINERS: Update ARM STi maintainers ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE ARM: bcm21664: Add board support. ARM: sunxi: Add the new watchog compatibles to the reboot code ARM: enable ARM_HAS_SG_CHAIN for multiplatform ARM: davinci: remove da8xx_omapl_defconfig ARM: davinci: da8xx: fix multiple watchdog device registration ARM: davinci: add da8xx specific configs to davinci_all_defconfig ARM: davinci: enable da8xx build concurrently with older devices ARM: BCM5301X: workaround suppress fault ARM: BCM5301X: add early debugging support ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU ARM: mach-bcm: Remove GENERIC_TIME ARM: shmobile: APMU: Fix warnings due to improper printk formats ...
2014-04-05Merge tag 'cleanup-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "These cleanup patches are mainly move stuff around and should all be harmless. They are mainly split out so that other branches can be based on top to avoid conflicts. Notable changes are: - We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no longer used (Uwe Kleine-König) - The Qualcomm MSM platform is split out into legacy mach-msm and new-style mach-qcom, to allow easier maintainance of the new hardware support without regressions (Kumar Gala) - A rework of some of the Kconfig logic to simplify multiplatform support (Rob Herring) - Samsung Exynos gets closer to supporting multiplatform (Sachin Kamat and others) - mach-bcm3528 gets merged into mach-bcm (Stephen Warren) - at91 gains some common clock framework support (Alexandre Belloni, Jean-Jacques Hiblot and other French people)" * tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits) ARM: hisi: select HAVE_ARM_SCU only for SMP ARM: efm32: allow uncompress debug output ARM: prima2: build reset code standalone ARM: at91: add PWM clock ARM: at91: move sam9261 SoC to common clk ARM: at91: prepare common clk transition for sam9261 SoC ARM: at91: updated the at91_dt_defconfig with support for the ADS7846 ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs ARM: at91: dt: Add at91sam9261 dt SoC support ARM: at91: switch sam9rl to common clock framework ARM: at91/dt: define main clk frequency of at91sam9rlek ARM: at91/dt: define at91sam9rl clocks ARM: at91: prepare common clk transition for sam9rl SoCs ARM: at91: prepare sam9 dt boards transition to common clk ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs ARM: at91: Add at91sam9rl DT SoC support ARM: at91: prepare at91sam9rl DT transition ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig ...
2014-04-05Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM changes from Russell King: - Perf updates from Will Deacon: - Support for Qualcomm Krait processors (run perf on your phone!) - Support for Cortex-A12 (run perf stat on your FPGA!) - Support for perf_sample_event_took, allowing us to automatically decrease the sample rate if we can't handle the PMU interrupts quickly enough (run perf record on your FPGA!). - Basic uprobes support from David Long: This patch series adds basic uprobes support to ARM. It is based on patches developed earlier by Rabin Vincent. That approach of adding hooks into the kprobes instruction parsing code was not well received. This approach separates the ARM instruction parsing code in kprobes out into a separate set of functions which can be used by both kprobes and uprobes. Both kprobes and uprobes then provide their own semantic action tables to process the results of the parsing. - ARMv7M (microcontroller) updates from Uwe Kleine-König - OMAP DMA updates (recently added Vinod's Ack even though they've been sitting in linux-next for a few months) to reduce the reliance of omap-dma on the code in arch/arm. - SA11x0 changes from Dmitry Eremin-Solenikov and Alexander Shiyan - Support for Cortex-A12 CPU - Align support for ARMv6 with ARMv7 so they can cooperate better in a single zImage. - Addition of first AT_HWCAP2 feature bits for ARMv8 crypto support. - Removal of IRQ_DISABLED from various ARM files - Improved efficiency of virt_to_page() for single zImage - Patch from Ulf Hansson to permit runtime PM callbacks to be available for AMBA devices for suspend/resume as well. - Finally kill asm/system.h on ARM. * 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (89 commits) dmaengine: omap-dma: more consolidation of CCR register setup dmaengine: omap-dma: move IRQ handling to omap-dma dmaengine: omap-dma: move register read/writes into omap-dma.c ARM: omap: dma: get rid of 'p' allocation and clean up ARM: omap: move dma channel allocation into plat-omap code ARM: omap: dma: get rid of errata global ARM: omap: clean up DMA register accesses ARM: omap: remove almost-const variables ARM: omap: remove references to disable_irq_lch dmaengine: omap-dma: cleanup errata 3.3 handling dmaengine: omap-dma: provide register read/write functions dmaengine: omap-dma: use cached CCR value when enabling DMA dmaengine: omap-dma: move barrier to omap_dma_start_desc() dmaengine: omap-dma: move clnk_ctrl setting to preparation functions dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registers dmaengine: omap-dma: consolidate clearing channel status register dmaengine: omap-dma: move CCR buffering disable errata out of the fast path dmaengine: omap-dma: provide register definitions dmaengine: omap-dma: consolidate setup of CCR dmaengine: omap-dma: consolidate setup of CSDP ...
2014-04-05Merge branch 'topic/exynos' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull exynos media updates from Mauro Carvalho Chehab: "These are the remaining patches I have for the merge windows. It basically adds a new sensor and adds the needed DT bits for it to work" * 'topic/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] s5p-fimc: Remove reference to outdated macro [media] s5p-jpeg: Fix broken indentation in jpeg-regs.h [media] exynos4-is: Add the FIMC-IS ISP capture DMA driver [media] exynos4-is: Add support for asynchronous subdevices registration [media] exynos4-is: Add clock provider for the SCLK_CAM clock outputs [media] exynos4-is: Use external s5k6a3 sensor driver [media] V4L: s5c73m3: Add device tree support [media] V4L: Add driver for s5k6a3 image sensor [media] Documentation: devicetree: Update Samsung FIMC DT binding [media] Documentation: dt: Add binding documentation for S5C73M3 camera [media] Documentation: dt: Add binding documentation for S5K6A3 image sensor
2014-04-04Merge tag 'fbdev-main-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev changes from Tomi Valkeinen: "Various fbdev fixes and improvements, but nothing big" * tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (38 commits) fbdev: Make the switch from generic to native driver less alarming Video: atmel: avoid the id of fix screen info is overwritten video: imxfb: Add DT default contrast control register property. video: atmel_lcdfb: ensure the hardware is initialized with the correct mode fbdev: vesafb: add dev->remove() callback fbdev: efifb: add dev->remove() callback video: pxa3xx-gcu: switch to devres functions video: pxa3xx-gcu: provide an empty .open call video: pxa3xx-gcu: pass around struct device * video: pxa3xx-gcu: rename some symbols sisfb: fix 1280x720 resolution support video: fbdev: uvesafb: Remove impossible code path in uvesafb_init_info video: fbdev: uvesafb: Remove redundant NULL check in uvesafb_remove fbdev: FB_OPENCORES should depend on HAS_DMA OMAPDSS: convert pixel clock to common videomode style OMAPDSS: Remove unused get_context_loss_count support OMAPDSS: use DISPC register to detect context loss video: da8xx-fb: Use "SIMPLE_DEV_PM_OPS" macro video: imxfb: Convert to SIMPLE_DEV_PM_OPS video: imxfb: Resolve mismatch between backlight/contrast ...
2014-04-04Merge branch 'cross-rename' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull renameat2 system call from Miklos Szeredi: "This adds a new syscall, renameat2(), which is the same as renameat() but with a flags argument. The purpose of extending rename is to add cross-rename, a symmetric variant of rename, which exchanges the two files. This allows interesting things, which were not possible before, for example atomically replacing a directory tree with a symlink, etc... This also allows overlayfs and friends to operate on whiteouts atomically. Andy Lutomirski also suggested a "noreplace" flag, which disables the overwriting behavior of rename. These two flags, RENAME_EXCHANGE and RENAME_NOREPLACE are only implemented for ext4 as an example and for testing" * 'cross-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ext4: add cross rename support ext4: rename: split out helper functions ext4: rename: move EMLINK check up ext4: rename: create ext4_renament structure for local vars vfs: add cross-rename vfs: lock_two_nondirectories: allow directory args security: add flags to rename hooks vfs: add RENAME_NOREPLACE flag vfs: add renameat2 syscall vfs: rename: use common code for dir and non-dir vfs: rename: move d_move() up vfs: add d_is_dir()
2014-04-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "The main set of series of patches for media subsystem, including: - document RC sysfs class - added an API to setup scancode to allow waking up systems using the Remote Controller - add API for SDR devices. Drivers are still on staging - some API improvements for getting EDID data from media inputs/outputs - new DVB frontend driver for drx-j (ATSC) - one driver (it913x/it9137) got removed, in favor of an improvement on another driver (af9035) - added a skeleton V4L2 PCI driver at documentation - added a dual flash driver (lm3646) - added a new IR driver (img-ir) - added an IR scancode decoder for the Sharp protocol - some improvements at the usbtv driver, to allow its core to be reused. - added a new SDR driver (rtl2832u_sdr) - added a new tuner driver (msi001) - several improvements at em28xx driver to fix PM support, device removal and to split the V4L2 specific bits into a separate sub-driver - one driver got converted to videobuf2 (s2255drv) - the e4000 tuner driver now follows an improved binding model - some fixes at V4L2 compat32 code - several fixes and enhancements at videobuf2 code - some cleanups at V4L2 API documentation - usual driver enhancements, new board additions and misc fixups" [ NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce indentation in of_graph_get_next_endpoint"). The of_graph_get_next_endpoint() function was moved and renamed by commit fd9fdb78a9bf ("[media] of: move graph helpers from drivers/media/v4l2-core to drivers/of"). It was originally called v4l2_of_get_next_endpoint() and lived in the file drivers/media/v4l2-core/v4l2-of.c. In that original location, it was then fixed to support empty port nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port nodes"), and that commit clashes badly with the dropped "Reduce intendation" commit. I had to choose one or the other, and decided that the "Support empty port nodes" commit was more important ] * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits) [media] em28xx-dvb: fix PCTV 461e tuner I2C binding Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding" [media] em28xx: fix PCTV 290e LNA oops [media] em28xx-dvb: fix PCTV 461e tuner I2C binding [media] m88ds3103: fix bug on .set_tone() [media] saa7134: fix WARN_ON during resume [media] v4l2-dv-timings: add module name, description, license [media] videodev2.h: add parenthesis around macro arguments [media] saa6752hs: depends on CRC32 [media] si4713: fix Kconfig dependencies [media] Sensoray 2255 uses videobuf2 [media] adv7180: free an interrupt on failure paths in init_device() [media] e4000: make VIDEO_V4L2 dependency optional [media] af9033: Don't export functions for the hardware filter [media] af9035: use af9033 PID filters [media] af9033: implement PID filter [media] rtl2832_sdr: do not use dynamic stack allocation [media] e4000: fix 32-bit build error [media] em28xx-audio: make sure audio is unmuted on open() [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format ...
2014-04-04hwmon: (it87) Add support for IT8623ERudolf Marek
Add support for the IT8623E found on Asus motherboards. It has same hardware monitoring block as IT8603E. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2014-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "The first round of updates for the input subsystem. Just new drivers and existing driver fixes, no core changes except for the new uinput IOCTL to allow userspace to fetch sysfs name of the input device that was created" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (43 commits) Input: edt-ft5x06 - add a missing condition Input: appletouch - fix jumps when additional fingers are detected Input: appletouch - implement sensor data smoothing Input: add driver for SOC button array Input: pm8xxx-vibrator - add DT match table Input: pmic8xxx-pwrkey - migrate to DT Input: pmic8xxx-keypad - migrate to DT Input: pmic8xxx-keypad - migrate to regmap APIs Input: pmic8xxx-keypad - migrate to devm_* APIs Input: pmic8xxx-keypad - fix build by removing gpio configuration Input: add new driver for ARM CLPS711X keypad Input: edt-ft5x06 - add support for M09 firmware version Input: edt-ft5x06 - ignore touchdown events Input: edt-ft5x06 - adjust delays to conform datasheet Input: edt-ft5x06 - add DT support Input: edt-ft5x06 - several cleanups; no functional change Input: appletouch - dial back fuzz setting Input: remove obsolete tnetv107x drivers Input: sirfsoc-onkey - set the capability of reporting KEY_POWER Input: da9052_onkey - use correct register bit for key status ...
2014-04-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull second round of hwmon updates from Guenter Roeck: "Add support for AMD F16 M30h processor to k10temp driver. This adds one more patch which had secondary dependencies. The branch point is arbitrary, but I did run a full set of build and qemu tests on it. While there are some new build failures (6 out of 122 in my builds), none are due to this commit" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (k10temp) Add support for AMD F16 M30h processor
2014-04-03Merge tag 'gpio-v3.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull bulk of gpio updates from Linus Walleij: "A pretty big chunk of changes this time, but it has all been on rotation in linux-next and had some testing. Of course there will be some amount of fixes on top... - Merged in a branch of irqchip changes from Thomas Gleixner: we need to have new callbacks from the irqchip to determine if the GPIO line will be eligible for IRQs, and this callback must be able to say "no". After some thinking I got the branch from tglx and have switched all current users over to use this. - Based on tglx patches, we have added some generic irqchip helpers in the gpiolib core. These will help centralize code when GPIO drivers have simple chained/cascaded IRQs. Drivers will still define their irqchip vtables, but the gpiolib core will take care of irqdomain set-up, mapping from local offsets to Linux irqs, and reserve resources by marking the GPIO lines for IRQs. - Initially the PL061 and Nomadik GPIO/pin control drivers have been switched over to use the new gpiochip-to-irqchip infrastructure with more drivers expected for the next kernel cycle. The factoring of just two drivers still makes it worth it so it is already a win. - A new driver for the Synopsys DesignWare APB GPIO block. - Modify the DaVinci GPIO driver to be reusable also for the new TI Keystone architecture. - A new driver for the LSI ZEVIO SoCs. - Delete the obsolte tnetv107x driver. - Some incremental work on GPIO descriptors: have gpiod_direction_output() use a logical level, respecting assertion polarity through ACTIVE_LOW flags, adding gpiod_direction_output_raw() for the case where you want to set that very value. Add gpiochip_get_desc() to fetch a GPIO descriptor from a specific offset on a certain chip inside driver code. - Switch ACPI GPIO code over to using gpiochip_get_desc() and get rid of gpio_to_desc(). - The ACPI GPIO event handling code has been reworked after encountering an actual real life implementation. - Support for ACPI GPIO operation regions. - Generic GPIO chips can now be assigned labels/names from platform data. - We now clamp values returned from GPIO drivers to the boolean [0,1] range. - Some improved documentation on how to use the polarity flag was added. - a large slew of incremental driver updates and non-critical fixes. Some targeted for stable" * tag 'gpio-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (80 commits) gpio: rcar: Add helper variable dev = &pdev->dev gpio-lynxpoint: force gpio_get() to return "1" and "0" only gpio: unmap gpio irqs properly pch_gpio: set value before enabling output direction gpio: moxart: Actually set output state in moxart_gpio_direction_output() gpio: moxart: Avoid forward declaration gpio: mxs: Allow for recursive enable_irq_wake() call gpio: samsung: Add missing "break" statement gpio: twl4030: Remove redundant assignment gpio: dwapb: correct gpio-cells in binding document gpio: iop: fix devm_ioremap_resource() return value checking pinctrl: coh901: convert driver to use gpiolib irqchip pinctrl: nomadik: convert driver to use gpiolib irqchip gpio: pl061: convert driver to use gpiolib irqchip gpio: add IRQ chip helpers in gpiolib pinctrl: nomadik: factor in platform data container pinctrl: nomadik: rename secondary to latent gpio: Driver for SYSCON-based GPIOs gpio: generic: Use platform_device_id->driver_data field for driver flags pinctrl: coh901: move irq line locking to resource callbacks ...
2014-04-03Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge first patch-bomb from Andrew Morton: - Various misc bits - kmemleak fixes - small befs, codafs, cifs, efs, freexxfs, hfsplus, minixfs, reiserfs things - fanotify - I appear to have become SuperH maintainer - ocfs2 updates - direct-io tweaks - a bit of the MM queue - printk updates - MAINTAINERS maintenance - some backlight things - lib/ updates - checkpatch updates - the rtc queue - nilfs2 updates - Small Documentation/ updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (237 commits) Documentation/SubmittingPatches: remove references to patch-scripts Documentation/SubmittingPatches: update some dead URLs Documentation/filesystems/ntfs.txt: remove changelog reference Documentation/kmemleak.txt: updates fs/reiserfs/super.c: add __init to init_inodecache fs/reiserfs: move prototype declaration to header file fs/hfsplus/attributes.c: add __init to hfsplus_create_attr_tree_cache() fs/hfsplus/extents.c: fix concurrent acess of alloc_blocks fs/hfsplus/extents.c: remove unused variable in hfsplus_get_block nilfs2: update project's web site in nilfs2.txt nilfs2: update MAINTAINERS file entries fix nilfs2: verify metadata sizes read from disk nilfs2: add FITRIM ioctl support for nilfs2 nilfs2: add nilfs_sufile_trim_fs to trim clean segs nilfs2: implementation of NILFS_IOCTL_SET_SUINFO ioctl nilfs2: add nilfs_sufile_set_suinfo to update segment usage nilfs2: add struct nilfs_suinfo_update and flags nilfs2: update MAINTAINERS file entries fs/coda/inode.c: add __init to init_inodecache() BEFS: logging cleanup ...
2014-04-03Documentation/SubmittingPatches: remove references to patch-scriptsMitchel Humpherys
The link to the tarball for Andrew Morton's patch scripts is dead. These scripts don't seem to be used for kernel development these days anyways so just rip out all references to them. Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03Documentation/SubmittingPatches: update some dead URLsMitchel Humpherys
The links to "The perfect patch" and "NO!!!! No more huge patch bombs..." have gone stale. Update them to some working locations. Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03Documentation/filesystems/ntfs.txt: remove changelog referenceFabian Frederick
File was removed in commit 7c821a179f91 ("Remove fs/ntfs/ChangeLog"). Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03Documentation/kmemleak.txt: updatesWang YanQing
Update Documentatin/kmemleak.txt to reflect the following changes: Commit b69ec42b1b19 ("Kconfig: clean up the long arch list for the DEBUG_KMEMLEAK config option") made it so that we can't check supported architectures by read Kconfig.debug. Commit 85d3a316c71 ("kmemleak: use rbtree instead of prio tree") converted kmemleak to use rbtree instead of prio tree. Signed-off-by: Wang YanQing <udknight@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03nilfs2: update project's web site in nilfs2.txtRyusuke Konishi
Project's web site was moved to nilfs.sourceforge.net from www.nilfs.org. This updates the site information in Documentation/filesystems/nilfs2.txt with the new location. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03nilfs2: implementation of NILFS_IOCTL_SET_SUINFO ioctlAndreas Rohner
With this ioctl the segment usage entries in the SUFILE can be updated from userspace. This is useful, because it allows the userspace GC to modify and update segment usage entries for specific segments, which enables it to avoid unnecessary write operations. If a segment needs to be cleaned, but there is no or very little reclaimable space in it, the cleaning operation basically degrades to a useless moving operation. In the end the only thing that changes is the location of the data and a timestamp in the segment usage information. With this ioctl the GC can skip the cleaning and update the segment usage entries directly instead. This is basically a shortcut to cleaning the segment. It is still necessary to read the segment summary information, but the writing of the live blocks can be skipped if it's not worth it. [konishi.ryusuke@lab.ntt.co.jp: add description of NILFS_IOCTL_SET_SUINFO ioctl] Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03rtc: sunxi: change compatiblesMaxime Ripard
The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Change the compatibles to match the other pattern in the RTC driver for consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03SubmittingPatches: document the use of gitJosh Triplett
Most of the mechanical portions of SubmittingPatches exist to help patch submitters replicate the output of git. Mention this explicitly, both as a reminder that git will help with this process, and as signposting to let git users know what they can safely skip. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Borislav Petkov <bp@suse.de> Cc: Rob Landley <rob@landley.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03SubmittingPatches: add recommendation for mailing list referencesJosh Triplett
SubmittingPatches already mentions referencing bugs fixed by a commit, but doesn't mention citing relevant mailing list discussions. Add a note to that effect, along with a recommendation to use the https://lkml.kernel.org/ redirector. Portions based on text from git's SubmittingPatches. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Borislav Petkov <bp@suse.de> Cc: Rob Landley <rob@landley.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03SubmittingPatches: add style recommendation to use imperative descriptionsJosh Triplett
Most commit messages use this style, and the recommendation frequently comes up in discussions (especially in response to patches that don't use it), but that recommendation doesn't actually appear anywhere in Documentation. Add this style guideline to SubmittingPatches, using the description from git's SubmittingPatches. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Borislav Petkov <bp@suse.de> Cc: Rob Landley <rob@landley.net> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03drop_caches: add some documentation and info messageDave Hansen
There is plenty of anecdotal evidence and a load of blog posts suggesting that using "drop_caches" periodically keeps your system running in "tip top shape". Perhaps adding some kernel documentation will increase the amount of accurate data on its use. If we are not shrinking caches effectively, then we have real bugs. Using drop_caches will simply mask the bugs and make them harder to find, but certainly does not fix them, nor is it an appropriate "workaround" to limit the size of the caches. On the contrary, there have been bug reports on issues that turned out to be misguided use of cache dropping. Dropping caches is a very drastic and disruptive operation that is good for debugging and running tests, but if it creates bug reports from production use, kernel developers should be aware of its use. Add a bit more documentation about it, a syslog message to track down abusers, and vmstat drop counters to help analyze problem reports. [akpm@linux-foundation.org: checkpatch fixes] [hannes@cmpxchg.org: add runtime suppression control] Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03mm + fs: store shadow entries in page cacheJohannes Weiner
Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03kmemleak: allow freeing internal objects after kmemleak was disabledLi Zefan
Currently if kmemleak is disabled, the kmemleak objects can never be freed, no matter if it's disabled by a user or due to fatal errors. Those objects can be a big waste of memory. OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 1200264 1197433 99% 0.30K 46164 26 369312K kmemleak_object With this patch, after kmemleak was disabled you can reclaim memory with: # echo clear > /sys/kernel/debug/kmemleak Also inform users about this with a printk. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03Merge tag 'trace-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "Most of the changes were largely clean ups, and some documentation. But there were a few features that were added: Uprobes now work with event triggers and multi buffers and have support under ftrace and perf. The big feature is that the function tracer can now be used within the multi buffer instances. That is, you can now trace some functions in one buffer, others in another buffer, all functions in a third buffer and so on. They are basically agnostic from each other. This only works for the function tracer and not for the function graph trace, although you can have the function graph tracer running in the top level buffer (or any tracer for that matter) and have different function tracing going on in the sub buffers" * tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits) tracing: Add BUG_ON when stack end location is over written tracepoint: Remove unused API functions Revert "tracing: Move event storage for array from macro to standalone function" ftrace: Constify ftrace_text_reserved tracepoints: API doc update to tracepoint_probe_register() return value tracepoints: API doc update to data argument ftrace: Fix compilation warning about control_ops_free ftrace/x86: BUG when ftrace recovery fails ftrace: Warn on error when modifying ftrace function ftrace: Remove freelist from struct dyn_ftrace ftrace: Do not pass data to ftrace_dyn_arch_init ftrace: Pass retval through return in ftrace_dyn_arch_init() ftrace: Inline the code from ftrace_dyn_table_alloc() ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt tracing: Evaluate len expression only once in __dynamic_array macro tracing: Correctly expand len expressions from __dynamic_array macro tracing/module: Replace include of tracepoint.h with jump_label.h in module.h tracing: Fix event header migrate.h to include tracepoint.h tracing: Fix event header writeback.h to include tracepoint.h tracing: Warn if a tracepoint is not set via debugfs ...
2014-04-02hwmon: (k10temp) Add support for AMD F16 M30h processorAravind Gopalakrishnan
Adding new PCI ID to support AMD F16 M30h processor (Mullins). While at it, modify Kconfig and Doc files to reflect the support for newer processors Note: PCI ID for this processor will make it into pci_ids.h as part of this patch: http://marc.info/?l=linux-kernel&m=139291362126057&w=2 which should be pulled into 3.15 when merge window opens (It currently sits in 'for-next' branch of bp.git- https://git.kernel.org/cgit/linux/kernel/git/bp/bp.git/log/?h=for-next) Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Here is my initial pull request for the networking subsystem during this merge window: 1) Support for ESN in AH (RFC 4302) from Fan Du. 2) Add full kernel doc for ethtool command structures, from Ben Hutchings. 3) Add BCM7xxx PHY driver, from Florian Fainelli. 4) Export computed TCP rate information in netlink socket dumps, from Eric Dumazet. 5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas Dichtel. 6) Convert many drivers to pci_enable_msix_range(), from Alexander Gordeev. 7) Record SKB timestamps more efficiently, from Eric Dumazet. 8) Switch to microsecond resolution for TCP round trip times, also from Eric Dumazet. 9) Clean up and fix 6lowpan fragmentation handling by making use of the existing inet_frag api for it's implementation. 10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss. 11) Auto size SKB lengths when composing netlink messages based upon past message sizes used, from Eric Dumazet. 12) qdisc dumps can take a long time, add a cond_resched(), From Eric Dumazet. 13) Sanitize netpoll core and drivers wrt. SKB handling semantics. Get rid of never-used-in-tree netpoll RX handling. From Eric W Biederman. 14) Support inter-address-family and namespace changing in VTI tunnel driver(s). From Steffen Klassert. 15) Add Altera TSE driver, from Vince Bridgers. 16) Optimizing csum_replace2() so that it doesn't adjust the checksum by checksumming the entire header, from Eric Dumazet. 17) Expand BPF internal implementation for faster interpreting, more direct translations into JIT'd code, and much cleaner uses of BPF filtering in non-socket ocntexts. From Daniel Borkmann and Alexei Starovoitov" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits) netpoll: Use skb_irq_freeable to make zap_completion_queue safe. net: Add a test to see if a skb is freeable in irq context qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port' net: ptp: move PTP classifier in its own file net: sxgbe: make "core_ops" static net: sxgbe: fix logical vs bitwise operation net: sxgbe: sxgbe_mdio_register() frees the bus Call efx_set_channels() before efx->type->dimension_resources() xen-netback: disable rogue vif in kthread context net/mlx4: Set proper build dependancy with vxlan be2net: fix build dependency on VxLAN mac802154: make csma/cca parameters per-wpan mac802154: allow only one WPAN to be up at any given time net: filter: minor: fix kdoc in __sk_run_filter netlink: don't compare the nul-termination in nla_strcmp can: c_can: Avoid led toggling for every packet. can: c_can: Simplify TX interrupt cleanup can: c_can: Store dlc private can: c_can: Reduce register access can: c_can: Make the code readable ...
2014-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - substantial cleanup of the generic and transport layers, in the direction of an ultimate goal of making struct hid_device completely transport independent, by Benjamin Tissoires - cp2112 driver from David Barksdale - a lot of fixes and new hardware support (Dualshock 4) to hid-sony driver, by Frank Praznik - support for Win 8.1 multitouch protocol by Andrew Duggan - other smaller fixes / device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (75 commits) HID: sony: fix force feedback mismerge HID: sony: Set the quriks flag for Bluetooth controllers HID: sony: Fix Sixaxis cable state detection HID: uhid: Add UHID_CREATE2 + UHID_INPUT2 HID: hyperv: fix _raw_request() prototype HID: hyperv: Implement a stub raw_request() entry point HID: hid-sensor-hub: fix sleeping function called from invalid context HID: multitouch: add support for Win 8.1 multitouch touchpads HID: remove hid_output_raw_report transport implementations HID: sony: do not rely on hid_output_raw_report HID: cp2112: remove the last hid_output_raw_report() call HID: cp2112: remove various hid_out_raw_report calls HID: multitouch: add support of other generic collections in hid-mt HID: multitouch: remove pen special handling HID: multitouch: remove registered devices with default behavior HID: hidp: Add a comment that some devices depend on the current behavior of uniq HID: sony: Prevent duplicate controller connections. HID: sony: Perform a boundry check on the sixaxis battery level index. HID: sony: Fix work queue issues HID: sony: Fix multi-line comment styling ...
2014-04-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science -- mostly documentation and comment updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: sparse: fix comment doc: fix double words isdn: capi: fix "CAPI_VERSION" comment doc: DocBook: Fix typos in xml and template file Bluetooth: add module name for btwilink driver core: unexport static function create_syslog_header mmc: core: typo fix in printk specifier ARM: spear: clean up editing mistake net-sysfs: fix comment typo 'CONFIG_SYFS' doc: Insert MODULE_ in module-signing macros Documentation: update URL to hfsplus Technote 1150 gpio: update path to documentation ixgbe: Fix format string in ixgbe_fcoe. Kconfig: Remove useless "default N" lines user_namespace.c: Remove duplicated word in comment CREDITS: fix formatting treewide: Fix typo in Documentation/DocBook mm: Fix warning on make htmldocs caused by slab.c ata: ata-samsung_cf: cleanup in header file idr: remove unused prototype of idr_free()
2014-04-02Merge tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "PPC and ARM do not have much going on this time. Most of the cool stuff, instead, is in s390 and (after a few releases) x86. ARM has some caching fixes and PPC has transactional memory support in guests. MIPS has some fixes, with more probably coming in 3.16 as QEMU will soon get support for MIPS KVM. For x86 there are optimizations for debug registers, which trigger on some Windows games, and other important fixes for Windows guests. We now expose to the guest Broadwell instruction set extensions and also Intel MPX. There's also a fix/workaround for OS X guests, nested virtualization features (preemption timer), and a couple kvmclock refinements. For s390, the main news is asynchronous page faults, together with improvements to IRQs (floating irqs and adapter irqs) that speed up virtio devices" * tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits) KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8 KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode KVM: PPC: Book3S HV: Return ENODEV error rather than EIO KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state KVM: PPC: Book3S HV: Add transactional memory support KVM: Specify byte order for KVM_EXIT_MMIO KVM: vmx: fix MPX detection KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write KVM: s390: clear local interrupts at cpu initial reset KVM: s390: Fix possible memory leak in SIGP functions KVM: s390: fix calculation of idle_mask array size KVM: s390: randomize sca address KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP KVM: Bump KVM_MAX_IRQ_ROUTES for s390 KVM: s390: irq routing for adapter interrupts. KVM: s390: adapter interrupt sources ...
2014-04-02Merge tag 'dt-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull devicetree changes from Grant Likely: "Updates to devicetree core code. This branch contains the following notable changes: - add reserved memory binding - make struct device_node a kobject and remove legacy /proc/device-tree - ePAPR conformance fixes - update in-kernel DTC copy to version v1.4.0 - preparatory changes for dynamic device tree overlays - minor bug fixes and documentation changes The most significant change in this branch is the conversion of struct device_node to be a kobject that is exposed via sysfs and removal of the old /proc/device-tree code. This simplifies the device tree handling code and tightens up the lifecycle on device tree nodes. [updated: added fix for dangling select PROC_DEVICETREE]" * tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits) dt: Remove dangling "select PROC_DEVICETREE" of: Add support for ePAPR "stdout-path" property of: device_node kobject lifecycle fixes of: only scan for reserved mem when fdt present powerpc: add support for reserved memory defined by device tree arm64: add support for reserved memory defined by device tree of: add missing major vendors of: add vendor prefix for SMSC of: remove /proc/device-tree of/selftest: Add self tests for manipulation of properties of: Make device nodes kobjects so they show up in sysfs arm: add support for reserved memory defined by device tree drivers: of: add support for custom reserved memory drivers drivers: of: add initialization code for dynamic reserved memory drivers: of: add initialization code for static reserved memory of: document bindings for reserved-memory nodes Revert "of: fix of_update_property()" kbuild: dtbs_install: new make target ARM: mvebu: Allows to get the SoC ID even without PCI enabled of: Allows to use the PCI translator without the PCI core ...