path: root/Documentation/devicetree
AgeCommit message (Collapse)Author
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem update from James Morris: "Just some minor updates across the subsystem" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: ima: eliminate passing d_name.name to process_measurement() TPM: Retry SaveState command in suspend path tpm/tpm_i2c_infineon: Add small comment about return value of __i2c_transfer tpm/tpm_i2c_infineon.c: Add OF attributes type and name to the of_device_id table entries tpm_i2c_stm_st33: Remove duplicate inclusion of header files tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C) char/tpm: Convert struct i2c_msg initialization to C99 format drivers/char/tpm/tpm_ppi: use strlcpy instead of strncpy tpm/tpm_i2c_stm_st33: formatting and white space changes Smack: include magic.h in smackfs.c selinux: make security_sb_clone_mnt_opts return an error on context mismatch seccomp: allow BPF_XOR based ALU instructions. Fix NULL pointer dereference in smack_inode_unlink() and smack_inode_rmdir() Smack: add support for modification of existing rules smack: SMACK_MAGIC to include/uapi/linux/magic.h Smack: add missing support for transmute bit in smack_str_from_perm() Smack: prevent revoke-subject from failing when unseen label is written to it tomoyo: use DEFINE_SRCU() to define tomoyo_ss tomoyo: use DEFINE_SRCU() to define tomoyo_ss
2013-04-30Merge tag 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev Pull libata update from Jeff Garzik: - More ACPI fixes, cleanups - Minor cleanups for sata_highbank, pata_at32, pata_octeon_cf, sata_rcar - pata_legacy: small bug found in opti chipset code (untested fix, due to ancient h/w) - sata_fsl: RX water mark config knob, some h/w needs it - pata_imx: cleanups, DeviceTree support - SCSI<->ATA translator: properly export translator version, not device firmware version * tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_highbank: Rename proc_name to the module name ACPI/libata: Restore libata.noacpi support [libata] acpi: make ata_ap_acpi_handle not block [libata] SCSI: really use SATL version in VPD pata_imx: add devicetree support pata_imx: use void __iomem * for regs pata_imx: cleanup error path pata_imx: Use devm_clk_get sata_rcar: Convert to devm_ioremap_resource() fsl/sata: create a sysfs entry for rx water mark libata-acpi: remove redundent code for power resource handling sata_highbank: make ahci_highbank_pm_ops static pata_octeon_cf: Use resource_size function pata_legacy: bogus clock in opti82c46x_set_piomode() pata_at32: use module_platform_driver_probe()
2013-04-30Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-30Merge tag 'for-v3.10' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull battery updates from Anton Vorontsov: "Highlights: - OpenFirmware/DeviceTree support for the Power Supply core: the core now automatically populates supplied_from hierarchy from the device tree. With these patches chargers and batteries can now lookup each other without the board files support shim. Rhyland Klein at NVIDIA did the work - New ST-Ericsson ABX500 hwmon driver. The driver is heavily using the AB85xx core and depends on some recent changes to it, so that is why the driver comes through the battery tree. It has an appropriate ack from the hwmon maintainer (i.e. Guenter Roeck). Martin Persson at ST-Ericsson and Hongbo Zhang at Linaro authored the driver - Final bits to sync AB85xx ST-Ericsson changes into mainline. The changes touch mfd parts, but these were acked by the appropriate MFD maintainer (ie Samuel Ortiz). Lee Jones at Linaro did most of the work and lead the submission process. Minor changes, but still worth mentioning: - Battery temperature reporting fix for Nokia N900 phones - Versatile Express poweroff driver moved into drivers/power/reset/ - Tree-wide: use devm_kzalloc() where appropriate - Tree-wide: dev_pm_ops cleanups/fixes" * tag 'for-v3.10' of git://git.infradead.org/battery-2.6: (112 commits) pm2301-charger: Fix suspend/resume charger-manager: Use kmemdup instead of kzalloc + memcpy power_supply: Populate supplied_from hierarchy from the device tree power_supply: Add core support for supplied_from power_supply: Define Binding for power-supplies rx51_battery: Fix reporting temperature hwmon: Add ST-Ericsson ABX500 hwmon driver ab8500_bmdata: Export abx500_res_to_temp tables for hwmon ab8500_{bmdata,fg}: Add const attributes to some data arrays ab8500_bmdata: Eliminate CamelCase warning of some variables ab8500_btemp: Make ab8500_btemp_get* interfaces public goldfish_battery: Use resource_size() lp8788-charger: Use PAGE_SIZE for the sysfs read operation max8925_power: Use devm_kzalloc() da9030_battery: Use devm_kzalloc() da9052-battery: Use devm_kzalloc() ds2760_battery: Use devm_kzalloc() ds2780_battery: Use devm_kzalloc() gpio-charger: Use devm_kzalloc() isp1704_charger: Use devm_kzalloc() ...
2013-04-30Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media update from Mauro Carvalho Chehab: - OF documentation and patches at core and drivers, to be used by for embedded media systems - some I2C drivers used on go7007 were rewritten/promoted from staging: sony-btf-mpx, tw2804, tw9903, tw9906, wis-ov7640, wis-uda1342 - add fimc-is driver (Exynos) - add a new radio driver: radio-si476x - add a two new tuners: r820t and tuner_it913x - split camera code on em28xx driver and add more models - the cypress firmware load is used outside dvb usb drivers. So, move it to a common directory to make easier to re-use it - siano media driver updated to work with sms2270 devices - several work done in order to promote go7007 and solo6x1x out of staging (still, there are some pending issues) - several API compliance fixes at v4l2 drivers that don't behave as expected - as usual, lots of driver fixes, improvements, cleanups and new device addition at the existing drivers. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (831 commits) [media] cx88: make core less verbose [media] em28xx: fix oops at em28xx_dvb_bus_ctrl() [media] s5c73m3: fix indentation of the help section in Kconfig [media] cx25821-alsa: get rid of a __must_check warning [media] cx25821-video: declare cx25821_vidioc_s_std as static [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap [media] r820t: Remove a warning for an unused value [media] dib0090: Fix a warning at dib0090_set_EFUSE [media] dib8000: fix a warning [media] dib8000: Fix sub-channel range [media] dib8000: store dtv_property_cache in a temp var [media] dib8000: warning fix: declare internal functions as static [media] r820t: quiet gcc warning on n_ring [media] r820t: memory leak in release() [media] r820t: precendence bug in r820t_xtal_check() [media] videodev2.h: Remove the unused old V4L1 buffer types [media] anysee: Grammar s/report the/report to/ [media] anysee: Initialize ret = 0 in anysee_frontend_attach() [media] media: videobuf2: fix the length check for mmap [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0 ...
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small code cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits) mm: Convert print_symbol to %pSR gfs2: Convert print_symbol to %pSR m32r: Convert print_symbol to %pSR iostats.txt: add easy-to-find description for field 6 x86 cmpxchg.h: fix wrong comment treewide: Fix typo in printk and comments doc: devicetree: Fix various typos docbook: fix 8250 naming in device-drivers pata_pdc2027x: Fix compiler warning treewide: Fix typo in printks mei: Fix comments in drivers/misc/mei treewide: Fix typos in kernel messages pm44xx: Fix comment for "CONFIG_CPU_IDLE" doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP" mmzone: correct "pags" to "pages" in comment. kernel-parameters: remove outdated 'noresidual' parameter Remove spurious _H suffixes from ifdef comments sound: Remove stray pluses from Kconfig file radio-shark: Fix printk "CONFIG_LED_CLASS" doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE ...
2013-04-29Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge second batch of fixes from Andrew Morton: - various misc bits - some printk updates - a new "SRAM" driver. - MAINTAINERS updates - the backlight driver queue - checkpatch updates - a few init/ changes - a huge number of drivers/rtc changes - fatfs updates - some lib/idr.c work - some renaming of the random driver interfaces * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (285 commits) net: rename random32 to prandom net/core: remove duplicate statements by do-while loop net/core: rename random32() to prandom_u32() net/netfilter: rename random32() to prandom_u32() net/sched: rename random32() to prandom_u32() net/sunrpc: rename random32() to prandom_u32() scsi: rename random32() to prandom_u32() lguest: rename random32() to prandom_u32() uwb: rename random32() to prandom_u32() video/uvesafb: rename random32() to prandom_u32() mmc: rename random32() to prandom_u32() drbd: rename random32() to prandom_u32() kernel/: rename random32() to prandom_u32() mm/: rename random32() to prandom_u32() lib/: rename random32() to prandom_u32() x86: rename random32() to prandom_u32() x86: pageattr-test: remove srandom32 call uuid: use prandom_bytes() raid6test: use prandom_bytes() sctp: convert sctp_assoc_set_id() to use idr_alloc_cyclic() ...
2013-04-29drivers/rtc/rtc-at91rm9200.c: add DT supportJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/video/backlight/tps65217_bl.c add default brightness value optionMatus Ujhelyi
Signed-off-by: Matus Ujhelyi <matus.ujhelyi@streamunlimited.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29Documentation: add missing documentation for tps65217-bl device tree bindingMatus Ujhelyi
Signed-off-by: Matus Ujhelyi <matus.ujhelyi@streamunlimited.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29backlight: lp855x: add a device tree structureKim, Milo
Enable supporting the DT structure of LP855x family devices. If the platform data is NULL, the driver tries to parse a DT structure. Then, the platform data is copied from the DT. Documentation is added as well. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29media: coda: use genalloc APIPhilipp Zabel
This patch depends on "genalloc: add devres support, allow to find a managed pool by device", which provides the of_get_named_gen_pool and dev_get_gen_pool functions. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Michal Simek <monstr@monstr.eu> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Shijie <shijie8@gmail.com> Cc: Matt Porter <mporter@ti.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29misc: generic on-chip SRAM allocation driverPhilipp Zabel
This driver requests and remaps a memory region as configured in the device tree. It serves memory from this region via the genalloc API. It optionally enables the SRAM clock. Other drivers can retrieve the genalloc pool from a phandle pointing to this drivers' device node in the device tree. The allocation granularity is hard-coded to 32 bytes for now, to make the SRAM driver useful for the 6502 remoteproc driver. There is overhead for bigger SRAMs, where only a much coarser allocation granularity is needed: At 32 bytes minimum allocation size, a 256 KiB SRAM needs a 1 KiB bitmap to track allocations. [akpm@linux-foundation.org: fix Kconfig text, make sram_init static] Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Michal Simek <monstr@monstr.eu> Cc: Dong Aisheng <dong.aisheng@linaro.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Shijie <shijie8@gmail.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Matt Porter <mporter@ti.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29Merge tag 'clk-for-linus-3.10' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock framework update from Michael Turquette: "The common clock framework changes for 3.10 include many fixes for existing platforms, as well as adoption of the framework by new platforms and devices. Some long-needed fixes to the core framework are here as well as new features such as improved initialization of clocks from DT as well as framework reentrancy for nested clock operations." * tag 'clk-for-linus-3.10' of git://git.linaro.org/people/mturquette/linux: (44 commits) clk: add clk_ignore_unused option to keep boot clocks on clk: ux500: fix mismatched types clk: vexpress: Add separate SP810 driver clk: si5351: make clk-si5351 depend on CONFIG_OF clk: export __clk_get_flags for modular clock providers clk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate. clk: sunxi: Unify oscillator clock clk: composite: allow fixed rates & fixed dividers clk: composite: rename 'div' references to 'rate' clk: add si5351 i2c common clock driver clk: add device tree fixed-factor-clock binding support clk: Properly handle notifier return values clk: ux500: abx500: Define clock tree for ab850x clk: ux500: Add support for sysctrl clocks clk: mvebu: Fix valid value range checking for cpu_freq_select clk: Fixup locking issues for clk_set_parent clk: Fixup errorhandling for clk_set_parent clk: Restructure code for __clk_reparent clk: sunxi: drop an unnecesary kmalloc clk: sunxi: drop CLK_IGNORE_UNUSED ...
2013-04-29Merge tag 'spi-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, mainly driver work. A few highlights: - Supports bits per word compatibility checking in the core. - Allow use of the IP used in Freescale SPI controllers outside Freescale SoCs. - DMA support for the Atmel SPI driver. - New drivers for the BCM2835 and Tegra114" * tag 'spi-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits) spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list items spi-topcliff-pch: missing platform_driver_unregister() on error in pch_spi_init() ARM: dts: add pinctrl property for spi node for atmel SoC ARM: dts: add spi nodes for the atmel boards ARM: dts: add spi nodes for atmel SoC ARM: at91: add clocks for spi dt entries spi/spi-atmel: add dmaengine support spi/spi-atmel: add flag to controller data for lock operations spi/spi-atmel: add physical base address spi/sirf: fix MODULE_DEVICE_TABLE MAINTAINERS: Add git repository and update my address spi/s3c64xx: Check for errors in dmaengine prepare_transfer() spi/s3c64xx: Fix non-dmaengine usage spi: omap2-mcspi: fix error return code in omap2_mcspi_probe() spi/s3c64xx: let device core setup the default pin configuration MAINTAINERS: Update Grant's email address and maintainership spi: omap2-mcspi: Fix transfers if DMADEVICES is not set spi: s3c64xx: move to generic dmaengine API spi-gpio: init CS before spi_bitbang_setup() spi: spi-mpc512x-psc: let transmiter/receiver enabled when in xfer loop ...
2013-04-29Merge tag 'regulator-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The diffstat and changelog here is dominated by Lee Jones' heroic efforts to sync the ab8500 driver that's been maintained out of tree with mainline (plus Axel's cleanup work on the results) but there's a few other things here: - Axel Lin added regulator_map_voltage_ascend() optimising a common pattern for drivers using the core code. - Milo Kim tought the regulator core to handle regulators sharing an enable GPIO, avoiding the need to do hacks to support such systems. - Andrew Bresticker added code to handle missing supplies for regulators more sensibly for device tree systems, reducing the need for stubbing there. plus the usual batch of driver specific updates and fixes" * tag 'regulator-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (152 commits) regulator: mc13892: Fix MC13892_SWITCHERS0_SWxHI bit in set_voltage_sel regulator: Remove NULL test before calling regulator_unregister() regulator: mc13783: Add device tree probe support regulator: mc13xxx: Add warning of incorrect names of regulators regulator: max77686: Don't update max77686->opmode if update register fails regulator: max8952: Add missing config.of_node setting for regulator register regulator: ab3100: Fix regulator register error handling regulator: tps6524x: Use regulator_map_voltage_ascend regulator: lp8788-buck: Use regulator_map_voltage_ascend regulator: lp872x: Use regulator_map_voltage_ascend regulator: mc13892: Use regulator_map_voltage_ascend for mc13892_sw_regulator_ops regulator: tps65023: Use regulator_map_voltage_ascend regulator: tps65023: Merge tps65020 ldo1 and ldo2 vsel table regulator: tps6507x: Use regulator_map_voltage_ascend regulator: mc13892: Fix MC13892_SWITCHERS0_SWxHI bit in set_voltage_sel regulator: ab3100: device tree support regulator: ab3100: refactor probe to use IDs regulator: max8973: Don't override control1 variable when set ramp delay bits regulator: tps80031: Convert tps80031_dcdc_ops to [get|set]_voltage_sel_regmap regulator: tps80031: Fix LDO2 track mode for TPS80031 or TPS80032-ES1.0 ...
2013-04-29Merge tag 'usb-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
2013-04-29Merge tag 'tty-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver update from Greg Kroah-Hartman: "Here's the big tty/serial driver merge request for 3.10-rc1 Once again, Jiri has a number of TTY driver fixes and cleanups, and Peter Hurley came through with a bunch of ldisc fixes that resolve a number of reported issues. There are some other serial driver cleanups as well. All of these have been in the linux-next tree for a while" * tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits) tty/serial/sirf: fix MODULE_DEVICE_TABLE serial: mxs: drop superfluous {get|put}_device serial: mxs: fix buffer overflow ARM: PL011: add support for extended FIFO-size of PL011-r1p5 serial_core.c: add put_device() after device_find_child() tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe serial: sccnxp: Replace pdata.init/exit with regulator API serial: sccnxp: Do not override device name TTY: pty, fix compilation warning TTY: rocket, fix compilation warning TTY: ircomm: fix DTR being raised on hang up TTY: synclinkmp: fix DTR being raised on hang up TTY: synclink_gt: fix DTR being raised on hang up TTY: synclink: fix DTR being raised on hang up serial: 8250_dw: Fix the stub for dw8250_probe_acpi() serial: 8250_dw: Convert to devm_ioremap() serial: 8250_dw: Set port capabilities based on CPR register serial: 8250_dw: Let ACPI code extract the DMA client info serial: 8250_dw: Support clk framework also with ACPI serial: 8250_dw: Enable runtime PM ...
2013-04-29Merge tag 'staging-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver tree update from Greg Kroah-Hartman: "Here's the big staging driver tree update for 3.10-rc1 This update contains loads of comedi driver cleanups and fixes in here, iio updates, android driver changes, and other various staging driver cleanups. Thanks to some drivers being removed, and the comedi driver cleanups, we have removed more code than we added: 627 files changed, 65145 insertions(+), 76321 deletions(-) which is always nice to see. All of these have been in linux-next for a while." * tag 'staging-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (940 commits) staging: comedi: ni_labpc: fix legacy driver build staging: comedi: das800: cleanup the cio-das802/16 fifo comments staging: comedi: das800: rename CamelCase vars in das800_ai_do_cmd() staging: comedi: das800: tidy up the private data staging: comedi: das800: tidy up das800_interrupt() staging: comedi: das800: tidy up das800_ai_insn_read() staging: comedi: das800: tidy up das800_di_insn_bits() staging: comedi: das800: tidy up das800_do_insn_bits() staging: comedi: das800: remove extra divisor calculation call staging: comedi: das800: rename {enable,disable}_das800 staging: comedi: das800: tidy up subdevice init staging: comedi: das800: allow attaching without interrupt support staging: comedi: das800: interrupts are required for async command support staging: comedi: das800: tidy up das800_ai_do_cmdtest() staging: comedi: das800: remove 'volatile' on private data variables staging: comedi: das800: cleanup the boardinfo staging: comedi: das800: cleanup range table declarations staging: comedi: das800: introduce das800_ind_{write, read}() staging: comedi: das800: remove forward declarations staging: comedi: das800: move das800_set_frequency() ...
2013-04-29Merge tag 'char-misc-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver update from Greg Kroah-Hartman: "Here's the big char / misc driver update for 3.10-rc1 A number of various driver updates, the majority being new functionality in the MEI driver subsystem (it's now a subsystem, it started out just a single driver), extcon updates, memory updates, hyper-v updates, and a bunch of other small stuff that doesn't fit in any other tree. All of these have been in linux-next for a while" * tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (148 commits) Tools: hv: Fix a checkpatch warning tools: hv: skip iso9660 mounts in hv_vss_daemon tools: hv: use FIFREEZE/FITHAW in hv_vss_daemon tools: hv: use getmntent in hv_vss_daemon Tools: hv: Fix a checkpatch warning tools: hv: fix checks for origin of netlink message in hv_vss_daemon Tools: hv: fix warnings in hv_vss_daemon misc: mark spear13xx-pcie-gadget as broken mei: fix krealloc() misuse in in mei_cl_irq_read_msg() mei: reduce flow control only for completed messages mei: reseting -> resetting mei: fix reading large reposnes mei: revamp mei_irq_read_client_message function mei: revamp mei_amthif_irq_read_message mei: revamp hbm state machine Revert "drivers/scsi: use module_pcmcia_driver() in pcmcia drivers" Revert "scsi: pcmcia: nsp_cs: remove module init/exit function prototypes" scsi: pcmcia: nsp_cs: remove module init/exit function prototypes mei: wd: fix line over 80 characters misc: tsl2550: Use dev_pm_ops ...
2013-04-29Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon update from Guenter Roeck: - New drivers for NCT6775, NCT6776, NCT6779, and LM95234. - Added support for LTC2974, LTC3883, LM25056, TMP431, TMP432, ADT7310, and ADT7320 to existing drivers. - Various code cleanups and minor improvements. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits) hwmon: (nct6775) Fix coding style problems hwmon: (nct6775) Constify strings hwmon: (tmp401) Add support for TMP432 hwmon: (tmp401) Add support for update_interval attribute hwmon: (tmp401) Reset valid flag when resetting temperature history hwmon: (tmp401) Simplification and cleanup hwmon: (tmp401) Use sysfs_create_group / sysfs_remove_group hwmon: (tmp401) Drop unused defines, use BIT for bit masks hwmon: (nct6775) Use ARRAY_SIZE for loops where possible documentation: hwmon: Fix typo in documentation/hwmon hwmon: (nct6775) Enable both AUXTIN and VIN3 on NCT6776 hwmon: (ad7314) use spi_get_drvdata() and spi_set_drvdata() MAINTAINERS: Add myself as maintainer for the NCT6775 driver hwmon: (nct6775) Expand scope of supported chips hwmon: (gpio-fan) Use is_visible to determine if attributes should be created hwmon: (tmp401) Fix device detection for TMP411B and TMP411C hwmon: Add driver for LM95234 hwmon: (tmp401) Add support for TMP431 hwmon: (pmbus/lm25066) Add support for LM25056 hwmon: (pmbus/lm25066) Refactor device specific coefficients ...
2013-04-29Merge tag 'pinctrl-for-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl update from Linus Walleij: "These are the pinctrl changes for v3.10: - Patrice Chotard contributed a new configuration debugfs interface and reintroduced fine-grained locking into the core: instead of having a "big pinctrl lock" we have a per-controller lock and specialized locks for the global controller and pinctrl handle lists. - Haoijan Zhuang deleted all the PXA and MMP2 pinctrl drivers and replaced them with pinctrl-single (which is also used by other SoCs) so we are gaining consolidation. The platform particulars now come in through the device tree. - Haoijan also added support for generic pin config into the pinctrl-single driver which is another big consolidation win. - Finally also GPIO ranges are now supported by the pinctrl-single driver. - Tomasz Figa contributed a new Samsung S3C pinctrl driver, bringing more of the older Samsung platforms under the pinctrl umbrella and out of arch/arm. - Maxime Ripard contributed new Allwinner A10/A13 drivers. - Sachin Kamat, Wei Yongjun and Axel Lin did a lot of cleanups." * tag 'pinctrl-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (66 commits) pinctrl: move subsystem mutex to pinctrl_dev struct pinctrl/pinconfig: fix misplaced goto pinctrl: s3c64xx: Fix build error caused by undefined chained_irq_enter pinctrl/pinconfig: add debug interface pinctrl: abx500: fix issue when no pdata pinctrl: pinctrl-single: add missing double quote pinctrl: sunxi: Rename wemac functions to emac pinctrl: exynos5440: add gpio interrupt support pinctrl: exynos5440: fix probe failure due to missing pin-list in config nodes pinctrl: ab8505: Staticize some symbols pinctrl: ab8540: Staticize some symbols pinctrl: ab9540: Staticize some symbols pinctrl: ab8500: Staticize some symbols pinctrl: abx500: Staticize some symbols pinctrl: Add pinctrl-s3c64xx driver pinctrl: samsung: Handle banks with two configuration registers pinctrl: samsung: Remove hardcoded register offsets pinctrl: samsung: Split pin bank description into two structures pinctrl: samsung: Include pinctrl-exynos driver data conditionally pinctrl: samsung: Protect bank registers with a spinlock ...
2013-04-28Merge remote-tracking branch 'regulator/topic/max8952' into v3.9-rc8Mark Brown
2013-04-28regulator: mc13783: Add device tree probe supportAlexander Shiyan
Patch adds device tree probe support for mc13783-regulator driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-04-24doc: devicetree: Fix various typosMasanari Iida
Fix spelling typos in Documentation/devicetree/bindings. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-23staging: video: imx: Add BGR666 support for parallel displayMarek Vasut
Support the BGR666 format on the IPUv3 parallel display. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23staging: dwc2: add platform device bindingsMatthijs Kooijman
This adds a dwc_platform.ko module that can be loaded by using compatible = "snps,dwc2" in a device tree. Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Signed-off-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-16power_supply: Define Binding for power-suppliesRhyland Klein
This property is meant to be used in device nodes which represent power_supply devices that wish to provide a list of supplies which provide them power, such as a battery listing its chargers. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16spi/s3c64xx: let device core setup the default pin configurationThomas Abraham
With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-04-15pinctrl: pinctrl-single: add missing double quoteLad, Prabhakar
add a missing double quote for compatible property for pmx_wkup. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: Tony Lindgren <tony@atomide.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-12clk: add si5351 i2c common clock driverSebastian Hesselbarth
This patch adds a common clock driver for Silicon Labs Si5351a/b/c i2c programmable clock generators. Currently, the driver does not support VXCO feature of si5351b. Passing platform_data or DT bindings selectively allows to overwrite stored Si5351 configuration which is very helpful for clock generators with empty eeprom configuration. Corresponding device tree binding documentation is also added. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Daniel Mack <zonque@gmail.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Michal Bachraty <michal.bachraty@streamunlimited.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-12clk: add device tree fixed-factor-clock binding supportGregory CLEMENT
Add support for DT "fixed-factor-clock" binding to the common fixed factor clock support. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-12tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C)Peter Huewe
This driver adds support for Infineon's new SLB 9645 TT 1.2 I2C TPMs, which supports clockstretching, combined reads and a bus speed of up to 400khz. The device also has a new device id. The driver works now also fine with device trees, so you can instantiate your device by adding: + tpm { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; for SLB 9645 devices or + tpm { + compatible = "infineon,slb9635tt"; + reg = <0x20>; + }; for SLB 9635 devices to your device tree. tpm_i2c_infineon is also retained as a compatible id as a fallback to slb9635 protocol. The driver was tested on Beaglebone. Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
2013-04-11pata_imx: add devicetree supportSascha Hauer
Not much to do here, only the compatible entries have to be added. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-10cpufreq: exynos: Add cpufreq driver for exynos5440Amit Daniel Kachhap
This patch adds dvfs support for exynos5440 SOC. This soc has 4 cores and they scale at same frequency. The nature of exynos5440 clock controller is different from previous exynos controllers so not using the common exynos cpufreq framework. The major difference being interrupt notification for frequency change. Also, OPP library is used for device tree parsing to get different parameters like frequency, voltage etc. Since the opp library sorts the frequency table in ascending order so they are again re-arranged in descending order. This will have one-to-one mapping with the clock controller state management logic. Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-09pinctrl: Add pinctrl-s3c64xx driverTomasz Figa
This patch adds pinctrl-s3c64xx driver which implements pin control interface for Samsung S3C64xx SoCs. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-07hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driverNaveen Krishna Chatradhi
This patch adds DT support to NTC driver to parse the platform data. Also adds the support to work as an iio device client. During the probe ntc driver gets the respective channels of ADC and uses iio_raw_read calls to get the ADC converted value. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> [Guenter Roeck: fixed Kconfig dependencies; use ERR_CAST] Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07spi/tegra114: add spi driverLaxman Dewangan
Add SPI driver for NVIDIA's Tegra114 SPI controller. This controller is different than the older SoCs SPI controller in internal design as well as register interface. This driver supports the: - non DMA based transfer for smaller transfer i.e. less than FIFO depth. - APB DMA based transfer for larger transfer i.e. more than FIFO depth. - Clock gating through runtime PM callbacks. - registration through DT only. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Add support for Aeroflex Gaisler GRLIB cores normally ↵Andreas Larsson
running on SPARC This adds support for the mostly register-compatible SPICTRL cores from the GRLIB VHDL IP core library from Aeroflex Gaisler. They are normally running on SPARC. A different entry in of_fsl_spi_match matches this core and indicates a different hardware type that is used to set up different function pointers and special cases. The GRLIB core operates in cpu mode. The number of bits per word might be limited. There might be native chipselects selected via a slave select register. These differences to the FSL type cores, if present, are indicated by a capabilities register. Other register and function differences exists but are not relevant to the driver. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Make driver usable in CPU mode outside of an FSL_SOC ↵Andreas Larsson
environment This makes the spi-fsl-spi driver usable in CPU mode outside of an FSL_SOC and even an powerpc environment by moving CPM mode functionality to a separate file that is only compiled and linked in an FSL_SOC environment and adding some ifdefs to hide types and functions or provide alternatives. For devicetree probing a "clock-frequency" property is used for clock frequency instead of calls to FSL_SOC-specific functions. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-05Merge tag 'usb-for-v3.10' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v3.10 merge window Here is the big Gadget & PHY pull request. Many of us have been really busy lately getting multiple drivers to a better position. Since this pull request is so large, I will divide it in sections so it's easier to grasp what's included. - cleanups: . UDC drivers no longer touch gadget->dev, that's now udc-core responsibility . Many more UDC drivers converted to usb_gadget_map/unmap_request() . UDC drivers no longer initialize DMA-related fields from gadget's device structure . UDC drivers don't touch gadget.dev.driver directly . UDC drivers don't assign gadget.dev.release directly . Removal of some unused DMA_ADDR_INVALID . Introduction of CONFIG_USB_PHY . All phy drivers have been moved to drivers/usb/phy and renamed to a common naming scheme . Fix PHY layer so it never returns a NULL pointer, also fix all callers to avoid using IS_ERR_OR_NULL() . Sparse fixes all over the place . drivers/usb/otg/ has been deleted . Marvel drivers (mv_udc, ehci-mv, mv_otg and mv_u3d) improved clock usage - new features: . UDC core now provides a generic way for tracking and reporting UDC's state (not attached, resuming, suspended, addressed, default, etc) . twl4030-usb learned that it shouldn't be enabled during init . Full DT support for DWC3 has been implemented . ab8500-usb learned about pinctrl framework . nop PHY learned about DeviceTree and regulators . DWC3 learned about suspend/resume . DWC3 can now be compiled in host-only and gadget-only (as well as DRD) configurations . UVC now enables streaming endpoint based on negotiated speed . isp1301 now implements the PHY API properly . configfs-based interface for gadget drivers which will lead to the removal of all code which just combines functions together to build functional gadget drivers. . f_serial and f_obex were converted to new configfs interface while maintaining old interface around. - non-critical fixes: . UVC gadget driver got fixes for Endpoint usage and stream calculation . ab8500-usb fixed unbalanced clock and regulator API usage . twl4030-usb got a fix for when OMAP3 is booted with cable connected . fusb300_udc got a fix for DMA usage . UVC got fixes for two assertions of the USB Video Class Compliance specification revision 1.1 . build warning issues caused by recent addition of __must_check to regulator API These are all changes which deserve a mention, all other changes are related to these one or minor spelling fixes and other similar tasks. Signed-of-by: Felipe Balbi <balbi@ti.com>
2013-04-05regulator: max8952: Add Device Tree supportTomasz Figa
This patch adds Device Tree support to max8952 regulator driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-04[media] exynos4-is: Add Exynos4x12 FIMC-IS device tree binding documentationSylwester Nawrocki
This patch adds DT binding documentaton for the Imaging Subsystem (camera ISP) found on Samsung Exynos4x12 SoCs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04[media] exynos4-is: Correct clock properties description at the DT binding ↵Sylwester Nawrocki
documentation The 'camera' DT node needs to have sclk_cam0/1 and pxl_async0/1 clocks specified, while 'fimc' nodes should have only "fimc" and "sclk_fimc". "mux" and "parent" are leftovers from early versions of patches adding DT support, when the IP bus clock parent clock was being set by the driver. A better solution is needed to have e.g. clocks driver setting all required parent clocks, before clock consumers start using the clocks. Currently this binding doesn't describe parent clocks setup, it needs to be specified and handled somewhere else. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gatesEmilio López
This patchset adds DT support for all the AXI, AHB, APB0 and APB1 gates present on sunxi SoCs. Signed-off-by: Emilio López <emilio@elopez.com.ar> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-04video: fb: vt8500: Convert framebuffer drivers to standardized bindingTony Prisk
Now that a display timing binding is available, convert our almost identical binding to use the standard binding. This patch converts the vt8500 and wm8505 framebuffer drivers and associated dts/dtsi files to use the standard binding as defined in bindings/video/display-timing.txt. There are two side-effects of making this conversion: 1) The fb node should now be in the board file, rather than the soc file as the display-timing node is a child of the fb node. 2) We still require a bits per pixel property to initialize the framebuffer for the different lcd panels. Rather than including this as part of the display timing, it is moved into the framebuffer node. I have also taken the opportunity to alphabetise the includes of each driver to avoid double-ups. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-04-03Merge tag 'v3.9-rc5' into develLinus Walleij
Linux 3.9-rc5 Conflicts: drivers/pinctrl/pinconf.c
2013-04-02iio: at91_adc: fix missing Sample and Hold timeJean-Christophe PLAGNIOL-VILLARD
On the at91_adc a minimal Sample and Hold Time is necessary for the ADC to guarantee the best converted final value between two channels selection. This time has to be programmed through the bitfield SHTIM in the Mode Register ADC_MR. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-04-02iio: at91_adc: add sleep mode supportJean-Christophe PLAGNIOL-VILLARD
The sleep mode will allow to put the adc in sleep between conversion. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-04-02iio: at91_adc: add low and high res supportLudovic Desroches
at91 adc offers the choice between two resolutions: low and high. The low and high resolution values depends on adc IP version, as many IP properties have been exposed through device tree, these settings have also been added to the dt bindings. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>