AgeCommit message (Collapse)Author
2014-06-07workqueue: make rescuer_thread() empty wq->maydays list before exitingLai Jiangshan
commit 4d595b866d2c653dc90a492b9973a834eabfa354 upstream. After a @pwq is scheduled for emergency execution, other workers may consume the affectd work items before the rescuer gets to them. This means that a workqueue many have pwqs queued on @wq->maydays list while not having any work item pending or in-flight. If destroy_workqueue() executes in such condition, the rescuer may exit without emptying @wq->maydays. This currently doesn't cause any actual harm. destroy_workqueue() can safely destroy all the involved data structures whether @wq->maydays is populated or not as nobody access the list once the rescuer exits. However, this is nasty and makes future development difficult. Let's update rescuer_thread() so that it empties @wq->maydays after seeing should_stop to guarantee that the list is empty on rescuer exit. tj: Updated comment and patch description. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07workqueue: fix a possible race condition between rescuer and pwq-releaseLai Jiangshan
commit 77668c8b559e4fe2acf2a0749c7c83cde49a5025 upstream. There is a race condition between rescuer_thread() and pwq_unbound_release_workfn(). Even after a pwq is scheduled for rescue, the associated work items may be consumed by any worker. If all of them are consumed before the rescuer gets to them and the pwq's base ref was put due to attribute change, the pwq may be released while still being linked on @wq->maydays list making the rescuer dereference already freed pwq later. Make send_mayday() pin the target pwq until the rescuer is done with it. tj: Updated comment and patch description. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07workqueue: fix bugs in wq_update_unbound_numa() failure pathDaeseok Youn
commit 77f300b198f93328c26191b52655ce1b62e202cf upstream. wq_update_unbound_numa() failure path has the following two bugs. - alloc_unbound_pwq() is called without holding wq->mutex; however, if the allocation fails, it jumps to out_unlock which tries to unlock wq->mutex. - The function should switch to dfl_pwq on failure but didn't do so after alloc_unbound_pwq() failure. Fix it by regrabbing wq->mutex and jumping to use_dfl_pwq on alloc_unbound_pwq() failure. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 4c16bd327c74 ("workqueue: implement NUMA affinity for unbound workqueues") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07nfsd4: remove lockowner when removing lock stateidJ. Bruce Fields
commit a1b8ff4c97b4375d21b6d6c45d75877303f61b3b upstream. The nfsv4 state code has always assumed a one-to-one correspondance between lock stateid's and lockowners even if it appears not to in some places. We may actually change that, but for now when FREE_STATEID releases a lock stateid it also needs to release the parent lockowner. Symptoms were a subsequent LOCK crashing in find_lockowner_str when it calls same_lockowner_ino on a lockowner that unexpectedly has an empty so_stateids list. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07nfsd4: warn on finding lockowner without stateid'sJ. Bruce Fields
commit 27b11428b7de097c42f205beabb1764f4365443b upstream. The current code assumes a one-to-one lockowner<->lock stateid correspondance. Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07NFSD: Call ->set_acl with a NULL ACL structure if no entriesKinglong Mee
commit aa07c713ecfc0522916f3cd57ac628ea6127c0ec upstream. After setting ACL for directory, I got two problems that caused by the cached zero-length default posix acl. This patch make sure nfsd4_set_nfs4_acl calls ->set_acl with a NULL ACL structure if there are no entries. Thanks for Christoph Hellwig's advice. First problem: ............ hang ........... Second problem: [ 1610.167668] ------------[ cut here ]------------ [ 1610.168320] kernel BUG at /root/nfs/linux/fs/nfsd/nfs4acl.c:239! [ 1610.168320] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 1610.168320] Modules linked in: nfsv4(OE) nfs(OE) nfsd(OE) rpcsec_gss_krb5 fscache ip6t_rpfilter ip6t_REJECT cfg80211 xt_conntrack rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw auth_rpcgss nfs_acl snd_intel8x0 ppdev lockd snd_ac97_codec ac97_bus snd_pcm snd_timer e1000 pcspkr parport_pc snd parport serio_raw joydev i2c_piix4 sunrpc(OE) microcode soundcore i2c_core ata_generic pata_acpi [last unloaded: nfsd] [ 1610.168320] CPU: 0 PID: 27397 Comm: nfsd Tainted: G OE 3.15.0-rc1+ #15 [ 1610.168320] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 1610.168320] task: ffff88005ab653d0 ti: ffff88005a944000 task.ti: ffff88005a944000 [ 1610.168320] RIP: 0010:[<ffffffffa034d5ed>] [<ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd] [ 1610.168320] RSP: 0018:ffff88005a945b00 EFLAGS: 00010293 [ 1610.168320] RAX: 0000000000000001 RBX: ffff88006700bac0 RCX: 0000000000000000 [ 1610.168320] RDX: 0000000000000000 RSI: ffff880067c83f00 RDI: ffff880068233300 [ 1610.168320] RBP: ffff88005a945b48 R08: ffffffff81c64830 R09: 0000000000000000 [ 1610.168320] R10: ffff88004ea85be0 R11: 000000000000f475 R12: ffff880068233300 [ 1610.168320] R13: 0000000000000003 R14: 0000000000000002 R15: ffff880068233300 [ 1610.168320] FS: 0000000000000000(0000) GS:ffff880077800000(0000) knlGS:0000000000000000 [ 1610.168320] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1610.168320] CR2: 00007f5bcbd3b0b9 CR3: 0000000001c0f000 CR4: 00000000000006f0 [ 1610.168320] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1610.168320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1610.168320] Stack: [ 1610.168320] ffffffff00000000 0000000b67c83500 000000076700bac0 0000000000000000 [ 1610.168320] ffff88006700bac0 ffff880068233300 ffff88005a945c08 0000000000000002 [ 1610.168320] 0000000000000000 ffff88005a945b88 ffffffffa034e2d5 000000065a945b68 [ 1610.168320] Call Trace: [ 1610.168320] [<ffffffffa034e2d5>] nfsd4_get_nfs4_acl+0x95/0x150 [nfsd] [ 1610.168320] [<ffffffffa03400d6>] nfsd4_encode_fattr+0x646/0x1e70 [nfsd] [ 1610.168320] [<ffffffff816a6e6e>] ? kmemleak_alloc+0x4e/0xb0 [ 1610.168320] [<ffffffffa0327962>] ? nfsd_setuser_and_check_port+0x52/0x80 [nfsd] [ 1610.168320] [<ffffffff812cd4bb>] ? selinux_cred_prepare+0x1b/0x30 [ 1610.168320] [<ffffffffa0341caa>] nfsd4_encode_getattr+0x5a/0x60 [nfsd] [ 1610.168320] [<ffffffffa0341e07>] nfsd4_encode_operation+0x67/0x110 [nfsd] [ 1610.168320] [<ffffffffa033844d>] nfsd4_proc_compound+0x21d/0x810 [nfsd] [ 1610.168320] [<ffffffffa0324d9b>] nfsd_dispatch+0xbb/0x200 [nfsd] [ 1610.168320] [<ffffffffa00850cd>] svc_process_common+0x46d/0x6d0 [sunrpc] [ 1610.168320] [<ffffffffa0085433>] svc_process+0x103/0x170 [sunrpc] [ 1610.168320] [<ffffffffa032472f>] nfsd+0xbf/0x130 [nfsd] [ 1610.168320] [<ffffffffa0324670>] ? nfsd_destroy+0x80/0x80 [nfsd] [ 1610.168320] [<ffffffff810a5202>] kthread+0xd2/0xf0 [ 1610.168320] [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40 [ 1610.168320] [<ffffffff816c1ebc>] ret_from_fork+0x7c/0xb0 [ 1610.168320] [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40 [ 1610.168320] Code: 78 02 e9 e7 fc ff ff 31 c0 31 d2 31 c9 66 89 45 ce 41 8b 04 24 66 89 55 d0 66 89 4d d2 48 8d 04 80 49 8d 5c 84 04 e9 37 fd ff ff <0f> 0b 90 0f 1f 44 00 00 55 8b 56 08 c7 07 00 00 00 00 8b 46 0c [ 1610.168320] RIP [<ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd] [ 1610.168320] RSP <ffff88005a945b00> [ 1610.257313] ---[ end trace 838254e3e352285b ]--- Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07NFSd: call rpc_destroy_wait_queue() from free_client()Trond Myklebust
commit 4cb57e3032d4e4bf5e97780e9907da7282b02b0c upstream. Mainly to ensure that we don't leave any hanging timers. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07NFSd: Move default initialisers from create_client() to alloc_client()Trond Myklebust
commit 5694c93e6c4954fa9424c215f75eeb919bddad64 upstream. Aside from making it clearer what is non-trivial in create_client(), it also fixes a bug whereby we can call free_client() before idr_init() has been called. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07ALSA: hda - Fix onboard audio on Intel H97/Z97 chipsetsTakashi Iwai
commit 77f07800cb456bed6e5c345e6e4e83e8eda62437 upstream. The recent Intel H97/Z97 chipsets need the similar setups like other Intel chipsets for snooping, etc. Especially without snooping, the audio playback stutters or gets corrupted. This fix patch just adds the corresponding PCI ID entry with the proper flags. Reported-and-tested-by: Arthur Borsboom <arthurborsboom@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Input: synaptics - T540p - unify with other LEN0034 modelsHans de Goede
commit 6d396ede224dc596d92d7cab433713536e68916c upstream. The T540p has a touchpad with pnp-id LEN0034, all the models with this pnp-id have the same min/max values, except the T540p where the values are slightly off. Fix them to be identical. This is a preparation patch for simplifying the quirk table. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Input: synaptics - add min/max quirk for the ThinkPad W540Hans de Goede
commit 0b5fe736fe923f1f5e05413878d5990e92ffbdf5 upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1096436 Tested-and-reported-by: ajayr@bigfoot.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Input: elantech - fix touchpad initialization on Gigabyte U2442Hans de Goede
commit 36189cc3cd57ab0f1cd75241f93fe01de928ac06 upstream. The hw_version 3 Elantech touchpad on the Gigabyte U2442 does not accept 0x0b as initialization value for r10, this stand-alone version of the driver: http://planet76.com/drivers/elantech/psmouse-elantech-v6.tar.bz2 Uses 0x03 which does work, so this means not setting bit 3 of r10 which sets: "Enable Real H/W Resolution In Absolute mode" Which will result in half the x and y resolution we get with that bit set, so simply not setting it everywhere is not a solution. We've been unable to find a way to identify touchpads where setting the bit will fail, so this patch uses a dmi based blacklist for this. https://bugzilla.kernel.org/show_bug.cgi?id=61151 Reported-by: Philipp Wolfer <ph.wolfer@gmail.com> Tested-by: Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Input: atkbd - fix keyboard not working on some LG laptopsSheng-Liang Song
commit 3d725caa9dcc78c3dc9e7ea0c04f626468edd9c9 upstream. After issuing ATKBD_CMD_RESET_DIS, keyboard on some LG laptops stops working. The workaround is to stop issuing ATKBD_CMD_RESET_DIS commands. In order to keep changes in atkbd driver to the minimum we check DMI signature and only skip ATKBD_CMD_RESET_DIS if we are running on LG LW25-B7HV or P1-J273B. Signed-off-by: Sheng-Liang Song <ssl@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07trace: module: Maintain a valid user countRomain Izard
commit 098507ae3ec2331476fb52e85d4040c1cc6d0ef4 upstream. The replacement of the 'count' variable by two variables 'incs' and 'decs' to resolve some race conditions during module unloading was done in parallel with some cleanup in the trace subsystem, and was integrated as a merge. Unfortunately, the formula for this replacement was wrong in the tracing code, and the refcount in the traces was not usable as a result. Use 'count = incs - decs' to compute the user count. Link: http://lkml.kernel.org/p/1393924179-9147-1-git-send-email-romain.izard.pro@gmail.com Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Fixes: c1ab9cab7509 "merge conflict resolution" Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hostsK. Y. Srinivasan
commit 03367ef5ea811475187a0732aada068919e14d61 upstream. Only ws2012r2 hosts support the ability to reconnect to the host on VMBUS. This functionality is needed by kexec in Linux. To use this functionality we need to negotiate version 3.0 of the VMBUS protocol. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07i2c: i801: enable Intel BayTrail SMBUSChew, Kean ho
commit 1b31e9b76ef8c62291e698dfdb973499986a7f68 upstream. Add Device ID of Intel BayTrail SMBus Controller. Signed-off-by: Chew, Kean ho <kean.ho.chew@intel.com> Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: "Chang, Rebecca Swee Fun" <rebecca.swee.fun.chang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCHJames Ralston
commit afc659241258b40b683998ec801d25d276529f43 upstream. This patch adds the SMBus Device IDs for the Intel Wildcat Point-LP PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: "Chang, Rebecca Swee Fun" <rebecca.swee.fun.chang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07media: media-device: fix infoleak in ioctl media_enum_entities()Salva Peiró
commit e6a623460e5fc960ac3ee9f946d3106233fd28d8 upstream. This fixes CVE-2014-1739. Signed-off-by: Salva Peiró <speiro@ai2.upv.es> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07clk: vexpress: NULL dereference on error pathDan Carpenter
commit 6b4ed8b00e93bd31f24a25f59ed8d1b808d0cc00 upstream. If the allocation fails then we dereference the NULL in the error path. Just return directly. Fixes: ed27ff1db869 ('clk: Versatile Express clock generators ("osc") driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07crypto: crypto_wq - Fix late crypto work queue initializationTim Chen
commit 130fa5bc81b44b6cc1fbdea3abf6db0da22964e0 upstream. The crypto algorithm modules utilizing the crypto daemon could be used early when the system start up. Using module_init does not guarantee that the daemon's work queue is initialized when the cypto alorithm depending on crypto_wq starts. It is necessary to initialize the crypto work queue earlier at the subsystem init time to make sure that it is initialized when used. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Documentation: Update stable address in Chinese and Japanese translationsGeert Uytterhoeven
commit 98b0f811aade1b7c6e7806c86aa0befd5919d65f upstream. The English and Korean translations were updated, the Chinese and Japanese weren't. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07brcmsmac: fix deadlock on missing firmwareEmil Goode
commit 8fc1e8c240aab968db658b2d8d079b4391207a36 upstream. When brcm80211 firmware is not installed networking hangs. A deadlock happens because we call ieee80211_unregister_hw() from the .start callback of struct ieee80211_ops. When .start is called we are under rtnl lock and ieee80211_unregister_hw() tries to take it again. Function call stack: dev_change_flags() __dev_change_flags() __dev_open() ASSERT_RTNL() <-- Assert rtnl lock ops->ndo_open() .ndo_open = ieee80211_open, ieee80211_open() ieee80211_do_open() drv_start() local->ops->start() .start = brcms_ops_start, brcms_ops_start() brcms_remove() ieee80211_unregister_hw() rtnl_lock() <-- Here we deadlock Introduced by: commit 25b5632fb35ca61b8ae3eee235edcdc2883f7a5e ("brcmsmac: request firmware in .start() callback") This patch fixes the bug by removing the call to brcms_remove() and moves the brcms_request_fw() call to the top of the .start callback to not initiate anything unless firmware is installed. Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07leds: leds-pwm: properly clean up after probe failureRussell King
commit 392369019eb96e914234ea21eda806cb51a1073e upstream. When probing with DT, we add each LED one at a time. If we find a LED without a PWM device (because it is not available yet) we fail the initialisation, unregister previous LEDs, and then by way of managed resources, we free the structure. The problem with this is we may have a scheduled and active work_struct in this structure, and this results in a nasty kernel oops. We need to cancel this work_struct properly upon cleanup - and the cleanup we require is the same cleanup as we do when the LED platform device is removed. Rather than writing this same code three times, move it into a separate function and use it in all three places. Fixes: c971ff185f64 ("leds: leds-pwm: Defer led_pwm_set() if PWM can sleep") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/nouveau/pm/fan: drop the fan lock in fan_update() before reschedulingMartin Peres
commit 61679fe153b2b9ea5b5e2ab93305419e85e99a9d upstream. This should fix a deadlock that has been reported to us where fan_update() would hold the fan lock and try to grab the alarm_program_lock to reschedule an update. On an other CPU, the alarm_program_lock would have been taken before calling fan_update(), leading to a deadlock. We should Cc: <stable@vger.kernel.org> # 3.9+ Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by: Timothée Ravier <tim@siosm.fr> Tested-by: Boris Fersing (IRC nick fersingb, no public email address) Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/nouveau/acpi: allow non-optimus setups to load vbios from acpiIlia Mirkin
commit a3d0b1218d351c6e6f3cea36abe22236a08cb246 upstream. There appear to be a crop of new hardware where the vbios is not available from PROM/PRAMIN, but there is a valid _ROM method in ACPI. The data read from PCIROM almost invariably contains invalid instructions (still has the x86 opcodes), which makes this a low-risk way to try to obtain a valid vbios image. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76475 Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07rtl8192cu: Fix unbalanced irq enable in error path of rtl92cu_hw_init()Ben Hutchings
commit 3234f5b06fc3094176a86772cc64baf3decc98fc upstream. Fixes: a53268be0cb9 ('rtlwifi: rtl8192cu: Fix too long disable of IRQs') Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddrLiu Hua
commit 8fad87bca7ac9737e413ba5f1656f1114a8c314d upstream. When we configure CONFIG_ARM_LPAE=y, pfn << PAGE_SHIFT will overflow if pfn >= 0x100000 in copy_oldmem_page. So use __pfn_to_phys for converting. Signed-off-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07ARM: dts: i.MX53: Fix ipu register space sizeSascha Hauer
commit 6d66da89bf4422c0a0693627fb3e25f74af50f92 upstream. The IPU register space is 128MB, not 2GB. Fixes: abed9a6bf2bb 'ARM i.MX53: Add IPU support' Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07omap3isp: Defer probe when the IOMMU is not availableLaurent Pinchart
commit 7c0f812a5d65e712618af880dda4a5cc7ed79463 upstream. When the OMAP3 ISP driver is compiled in the kernel the device can be probed before the corresponding IOMMU is available. Defer the probe in that case, and fix a crash in the error path. Reported-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07posix_acl: handle NULL ACL in posix_acl_equiv_modeChristoph Hellwig
commit 50c6e282bdf5e8dabf8d7cf7b162545a55645fd9 upstream. Various filesystems don't bother checking for a NULL ACL in posix_acl_equiv_mode, and thus can dereference a NULL pointer when it gets passed one. This usually happens from the NFS server, as the ACL tools never pass a NULL ACL, but instead of one representing the mode bits. Instead of adding boilerplat to all filesystems put this check into one place, which will allow us to remove the check from other filesystems as well later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Ben Greear <greearb@candelatech.com> Reported-by: Marco Munderloh <munderl@tnt.uni-hannover.de>, Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Bluetooth: Add support for Lite-on [04ca:3007]Mohammed Habibulla
commit 1fb4e09a7e780b915dbd172592ae7e2a4c071065 upstream. Add support for the AR9462 chip T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3007 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Mohammed Habibulla <moch@chromium.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Bluetooth: Fix redundant encryption request for reauthenticationJohan Hedberg
commit 09da1f3463eb81d59685df723b1c5950b7570340 upstream. When we're performing reauthentication (in order to elevate the security level from an unauthenticated key to an authenticated one) we do not need to issue any encryption command once authentication completes. Since the trigger for the encryption HCI command is the ENCRYPT_PEND flag this flag should not be set in this scenario. Instead, the REAUTH_PEND flag takes care of all necessary steps for reauthentication. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Bluetooth: Fix triggering BR/EDR L2CAP Connect too earlyJohan Hedberg
commit 9eb1fbfa0a737fd4d3a6d12d71c5ea9af622b887 upstream. Commit 1c2e004183178 introduced an event handler for the encryption key refresh complete event with the intent of fixing some LE/SMP cases. However, this event is shared with BR/EDR and there we actually want to act only on the auth_complete event (which comes after the key refresh). If we do not do this we may trigger an L2CAP Connect Request too early and cause the remote side to return a security block error. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback dataClemens Ladisch
commit 7040b6d1febfdbd9c1595efb751d492cd2503f96 upstream. The TEAC UD-H01 firmware sends wrong feedback frequency values, thus causing the PC to send the samples at a wrong rate, which results in clicks and crackles in the output. Add a workaround to detect and fix the corruption. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> [mick37@gmx.de: use sender->udh01_fb_quirk rather than ep->udh01_fb_quirk in snd_usb_handle_sync_urb()] Reported-and-tested-by: Mick <mick37@gmx.de> Reported-and-tested-by: Andrea Messa <andr.messa@tiscali.it> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07rt2x00: fix beaconing on USBStanislaw Gruszka
commit 8834d3608cc516f13e2e510f4057c263f3d2ce42 upstream. When disable beaconing we clear register with beacon and newer set it back, what make we stop send beacons infinitely. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07USB: Nokia 5300 should be treated as unusual devDaniele Forsi
commit 6ed07d45d09bc2aa60e27b845543db9972e22a38 upstream. Signed-off-by: Daniele Forsi <dforsi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07USB: Nokia 305 should be treated as unusual devVictor A. Santos
commit f0ef5d41792a46a1085dead9dfb0bdb2c574638e upstream. Signed-off-by: Victor A. Santos <victoraur.santos@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07usb: storage: shuttle_usbat: fix discs being detected twiceDaniele Forsi
commit df602c2d2358f02c6e49cffc5b49b9daa16db033 upstream. Even if the USB-to-ATAPI converter supported multiple LUNs, this driver would always detect the same physical device or media because it doesn't use srb->device->lun in any way. Tested with an Hewlett-Packard CD-Writer Plus 8200e. Signed-off-by: Daniele Forsi <dforsi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07usb: qcserial: add a number of Dell devicesBjørn Mork
commit 4d7c0136a54f62501f8a34c4d08a5e0258d3d3ca upstream. Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Reported-by: AceLan Kao <acelan.kao@canonical.com> Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07USB: OHCI: fix problem with global suspend on ATI controllersAlan Stern
commit c1db30a2a79eb59997b13b8cabf2a50bea9f04e1 upstream. Some OHCI controllers from ATI/AMD seem to have difficulty with "global" USB suspend, that is, suspending an entire USB bus without setting the suspend feature for each port connected to a device. When we try to resume the child devices, the controller gives timeout errors on the unsuspended ports, requiring resets, and can even cause ohci-hcd to hang; see http://marc.info/?l=linux-usb&m=139514332820398&w=2 and the following messages. This patch fixes the problem by adding a new quirk flag to ohci-hcd. The flag causes the ohci_rh_suspend() routine to suspend each unsuspended, enabled port before suspending the root hub. This effectively converts the "global" suspend to an ordinary root-hub suspend. There is no need to unsuspend these ports when the root hub is resumed, because the child devices will be resumed anyway in the course of a normal system resume ("global" suspend is never used for runtime PM). This patch should be applied to all stable kernels which include commit 0aa2832dd0d9 (USB: use "global suspend" for system sleep on USB-2 buses) or a backported version thereof. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Peter Münster <pmlists@free.fr> Tested-by: Peter Münster <pmlists@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07usb: gadget: at91-udc: fix irq and iomem resource retrievalJean-Jacques Hiblot
commit 886c7c426d465732ec9d1b2bbdda5642fc2e7e05 upstream. When using dt resources retrieval (interrupts and reg properties) there is no predefined order for these resources in the platform dev resource table. Also don't expect the number of resource to be always 2. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler.com> Acked-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6Nikita Yushchenko
commit d183c81929beeba842b74422f754446ef2b8b49c upstream. Per reference manuals of Freescale P1020 and P2020 SoCs, USB controller present in these SoCs has bit 17 of USBx_CONTROL register marked as Reserved - there is no PHY_CLK_VALID bit there. Testing for this bit in ehci_fsl_setup_phy() behaves differently on two P1020RDB boards available here - on one board test passes and fsl-usb init succeeds, but on other board test fails, causing fsl-usb init to fail. This patch changes ehci_fsl_setup_phy() not to test PHY_CLK_VALID on controller version 1.6 that (per manual) does not have this bit. Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07iio:imu:mpu6050: Fixed segfault in Invensens MPU driver due to null dereferenceAtilla Filiz
commit b9b3a41893c3f1be67b5aacfa525969914bea0e9 upstream. The driver segfaults when the kernel boots with device tree as the platform data is then not present and the pointer is deferenced without checking it is not null. This patch introduces such a check avoiding the crash. Signed-off-by: Atilla Filiz <atilla.filiz@essensium.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/tegra: Remove gratuitous pad fieldThierry Reding
commit cbfbbabb89b37f6bad05f478d906a385149f288d upstream. The version of the drm_tegra_submit structure that was merged all the way back in 3.10 contains a pad field that was originally intended to properly pad the following __u64 field. Unfortunately it seems like a different field was dropped during review that caused this padding to become unnecessary, but the pad field wasn't removed at that time. One possible side-effect of this is that since the __u64 following the pad is now no longer properly aligned, the compiler may (or may not) introduce padding itself, which results in no predictable ABI. Rectify this by removing the pad field so that all fields are again naturally aligned. Technically this is breaking existing userspace ABI, but given that there aren't any (released) userspace drivers that make use of this yet, the fallout should be minimal. Fixes: d43f81cbaf43 ("drm/tegra: Add gr2d device") Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/radeon: check buffer relocation offsetLeo Liu
commit 695daf1a8e731a4b5b89de89a61f32a4d7ad7094 upstream. Signed-off-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/radeon: fix ATPX detection on non-VGA GPUsAlex Deucher
commit e9a4099a59cc598a44006059dd775c25e422b772 upstream. Some newer PX laptops have the pci device class set to DISPLAY_OTHER rather than DISPLAY_VGA. This properly detects ATPX on those laptops. Based on a patch from: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: airlied@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()Egbert Eich
commit 7f1950fbb989e8fc5463b307e062b4529d51c862 upstream. Depending on the SDVO output_flags SDVO may have multiple connectors linking to the same encoder (in intel_connector->encoder->base). Only one of those connectors should be active (ie link to the encoder thru drm_connector->encoder). If intel_connector_break_all_links() is called from intel_sanitize_crtc() we may break the crtc connection of an encoder thru an inactive connector in which case intel_connector_break_all_links() will not be called again for the active connector if this happens to come later in the list due to: if (connector->encoder->base.crtc != &crtc->base) continue; in intel_sanitize_crtc(). This will however leave the drm_connector->encoder linkage for this active connector in place. Subsequently this will cause multiple warnings in intel_connector_check_state() to trigger and the driver will eventually die in drm_encoder_crtc_ok() (because of crtc == NULL). To avoid this remove intel_connector_break_all_links() and move its code to its two calling functions: intel_sanitize_crtc() and intel_sanitize_encoder(). This allows to implement the link breaking more flexibly matching the surrounding code: ie. in intel_sanitize_crtc() we can break the crtc link separatly after the links to the encoders have been broken which avoids above problem. This regression has been introduced in: commit 24929352481f085c5f85d4d4cbc919ddf106d381 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jul 2 20:28:59 2012 +0200 drm/i915: read out the modeset hw state at load and resume time so goes back to the very beginning of the modeset rework. v2: This patch takes care of the concernes voiced by Chris Wilson and Daniel Vetter that only breaking links if the drm_connector is linked to an encoder may miss some links. v3: move all encoder handling to encoder loop as suggested by Daniel Vetter. Signed-off-by: Egbert Eich <eich@suse.de> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07md: avoid possible spinning md thread at shutdown.NeilBrown
commit 0f62fb220aa4ebabe8547d3a9ce4a16d3c045f21 upstream. If an md array with externally managed metadata (e.g. DDF or IMSM) is in use, then we should not set safemode==2 at shutdown because: 1/ this is ineffective: user-space need to be involved in any 'safemode' handling, 2/ The safemode management code doesn't cope with safemode==2 on external metadata and md_check_recover enters an infinite loop. Even at shutdown, an infinite-looping process can be problematic, so this could cause shutdown to hang. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07hrtimer: Set expiry time before switch_hrtimer_base()Viresh Kumar
commit 84ea7fe37908254c3bd90910921f6e1045c1747a upstream. switch_hrtimer_base() calls hrtimer_check_target() which ensures that we do not migrate a timer to a remote cpu if the timer expires before the current programmed expiry time on that remote cpu. But __hrtimer_start_range_ns() calls switch_hrtimer_base() before the new expiry time is set. So the sanity check in hrtimer_check_target() is operating on stale or even uninitialized data. Update expiry time before calling switch_hrtimer_base(). [ tglx: Rewrote changelog once again ] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: linaro-networking@linaro.org Cc: fweisbec@gmail.com Cc: arvind.chauhan@arm.com Link: http://lkml.kernel.org/r/81999e148745fc51bbcd0615823fbab9b2e87e23.1399882253.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07hrtimer: Prevent remote enqueue of leftmost timersLeon Ma
commit 012a45e3f4af68e86d85cce060c6c2fed56498b2 upstream. If a cpu is idle and starts an hrtimer which is not pinned on that same cpu, the nohz code might target the timer to a different cpu. In the case that we switch the cpu base of the timer we already have a sanity check in place, which determines whether the timer is earlier than the current leftmost timer on the target cpu. In that case we enqueue the timer on the current cpu because we cannot reprogram the clock event device on the target. If the timers base is already the target CPU we do not have this sanity check in place so we enqueue the timer as the leftmost timer in the target cpus rb tree, but we cannot reprogram the clock event device on the target cpu. So the timer expires late and subsequently prevents the reprogramming of the target cpu clock event device until the previously programmed event fires or a timer with an earlier expiry time gets enqueued on the target cpu itself. Add the same target check as we have for the switch base case and start the timer on the current cpu if it would become the leftmost timer on the target. [ tglx: Rewrote subject and changelog ] Signed-off-by: Leon Ma <xindong.ma@intel.com> Link: http://lkml.kernel.org/r/1398847391-5994-1-git-send-email-xindong.ma@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>