aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/netlogic/xlp/ahci-init.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/netlogic/xlp/ahci-init.c')
-rw-r--r--arch/mips/netlogic/xlp/ahci-init.c209
1 files changed, 209 insertions, 0 deletions
diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c
new file mode 100644
index 00000000000..a9d0fae0210
--- /dev/null
+++ b/arch/mips/netlogic/xlp/ahci-init.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2003-2014 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/mips-extns.h>
+
+#define SATA_CTL 0x0
+#define SATA_STATUS 0x1 /* Status Reg */
+#define SATA_INT 0x2 /* Interrupt Reg */
+#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */
+#define SATA_CR_REG_TIMER 0x4 /* PHY Conrol Timer Reg */
+#define SATA_CORE_ID 0x5 /* Core ID Reg */
+#define SATA_AXI_SLAVE_OPT1 0x6 /* AXI Slave Options Reg */
+#define SATA_PHY_LOS_LEV 0x7 /* PHY LOS Level Reg */
+#define SATA_PHY_MULTI 0x8 /* PHY Multiplier Reg */
+#define SATA_PHY_CLK_SEL 0x9 /* Clock Select Reg */
+#define SATA_PHY_AMP1_GEN1 0xa /* PHY Transmit Amplitude Reg 1 */
+#define SATA_PHY_AMP1_GEN2 0xb /* PHY Transmit Amplitude Reg 2 */
+#define SATA_PHY_AMP1_GEN3 0xc /* PHY Transmit Amplitude Reg 3 */
+#define SATA_PHY_PRE1 0xd /* PHY Transmit Preemphasis Reg 1 */
+#define SATA_PHY_PRE2 0xe /* PHY Transmit Preemphasis Reg 2 */
+#define SATA_PHY_PRE3 0xf /* PHY Transmit Preemphasis Reg 3 */
+#define SATA_SPDMODE 0x10 /* Speed Mode Reg */
+#define SATA_REFCLK 0x11 /* Reference Clock Control Reg */
+#define SATA_BYTE_SWAP_DIS 0x12 /* byte swap disable */
+
+/*SATA_CTL Bits */
+#define SATA_RST_N BIT(0)
+#define PHY0_RESET_N BIT(16)
+#define PHY1_RESET_N BIT(17)
+#define PHY2_RESET_N BIT(18)
+#define PHY3_RESET_N BIT(19)
+#define M_CSYSREQ BIT(2)
+#define S_CSYSREQ BIT(3)
+
+/*SATA_STATUS Bits */
+#define P0_PHY_READY BIT(4)
+#define P1_PHY_READY BIT(5)
+#define P2_PHY_READY BIT(6)
+#define P3_PHY_READY BIT(7)
+
+#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_sata_pcibase(node) \
+ nlm_pcicfg_base(XLP_IO_SATA_OFFSET(node))
+/* SATA device specific configuration registers are starts at 0x900 offset */
+#define nlm_get_sata_regbase(node) \
+ (nlm_get_sata_pcibase(node) + 0x900)
+
+static void sata_clear_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
+{
+ uint32_t reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
+}
+
+static void sata_set_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
+{
+ uint32_t reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val | bit));
+}
+
+static void nlm_sata_firmware_init(int node)
+{
+ uint32_t reg_val;
+ uint64_t regbase;
+ int i;
+
+ pr_info("XLP AHCI Initialization started.\n");
+ regbase = nlm_get_sata_regbase(node);
+
+ /* Reset SATA */
+ sata_clear_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ /* Reset PHY */
+ sata_clear_glue_reg(regbase, SATA_CTL,
+ (PHY3_RESET_N | PHY2_RESET_N
+ | PHY1_RESET_N | PHY0_RESET_N));
+
+ /* Set SATA */
+ sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ /* Set PHY */
+ sata_set_glue_reg(regbase, SATA_CTL,
+ (PHY3_RESET_N | PHY2_RESET_N
+ | PHY1_RESET_N | PHY0_RESET_N));
+
+ pr_debug("Waiting for PHYs to come up.\n");
+ i = 0;
+ do {
+ reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
+ i++;
+ } while (((reg_val & 0xF0) != 0xF0) && (i < 10000));
+
+ for (i = 0; i < 4; i++) {
+ if (reg_val & (P0_PHY_READY << i))
+ pr_info("PHY%d is up.\n", i);
+ else
+ pr_info("PHY%d is down.\n", i);
+ }
+
+ pr_info("XLP AHCI init done.\n");
+}
+
+static int __init nlm_ahci_init(void)
+{
+ int node = 0;
+ int chip = read_c0_prid() & PRID_REV_MASK;
+
+ if (chip == PRID_IMP_NETLOGIC_XLP3XX)
+ nlm_sata_firmware_init(node);
+ return 0;
+}
+
+static void nlm_sata_intr_ack(struct irq_data *data)
+{
+ uint32_t val = 0;
+ uint64_t regbase;
+
+ regbase = nlm_get_sata_regbase(nlm_nodeid());
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+}
+
+static void nlm_sata_fixup_bar(struct pci_dev *dev)
+{
+ /*
+ * The AHCI resource is in BAR 0, move it to
+ * BAR 5, where it is expected
+ */
+ dev->resource[5] = dev->resource[0];
+ memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+}
+
+static void nlm_sata_fixup_final(struct pci_dev *dev)
+{
+ uint32_t val;
+ uint64_t regbase;
+ int node = 0; /* XLP3XX does not support multi-node */
+
+ regbase = nlm_get_sata_regbase(node);
+
+ /* clear pending interrupts and then enable them */
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+
+ /* Mask the core interrupt. If all the interrupts
+ * are enabled there are spurious interrupt flow
+ * happening, to avoid only enable core interrupt
+ * mask.
+ */
+ sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
+
+ dev->irq = PIC_SATA_IRQ;
+ nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
+}
+
+arch_initcall(nlm_ahci_init);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
+ nlm_sata_fixup_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
+ nlm_sata_fixup_final);