aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/netlogic/xlp/ahci-init-xlp2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/netlogic/xlp/ahci-init-xlp2.c')
-rw-r--r--arch/mips/netlogic/xlp/ahci-init-xlp2.c377
1 files changed, 377 insertions, 0 deletions
diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
new file mode 100644
index 00000000000..c83dbf3689e
--- /dev/null
+++ b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
@@ -0,0 +1,377 @@
+/*
+ * Copyright (c) 2003-2014 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/pci_ids.h>
+#include <linux/nodemask.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/mips-extns.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+
+#define SATA_CTL 0x0
+#define SATA_STATUS 0x1 /* Status Reg */
+#define SATA_INT 0x2 /* Interrupt Reg */
+#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */
+#define SATA_BIU_TIMEOUT 0x4
+#define AXIWRSPERRLOG 0x5
+#define AXIRDSPERRLOG 0x6
+#define BiuTimeoutLow 0x7
+#define BiuTimeoutHi 0x8
+#define BiuSlvErLow 0x9
+#define BiuSlvErHi 0xa
+#define IO_CONFIG_SWAP_DIS 0xb
+#define CR_REG_TIMER 0xc
+#define CORE_ID 0xd
+#define AXI_SLAVE_OPT1 0xe
+#define PHY_MEM_ACCESS 0xf
+#define PHY0_CNTRL 0x10
+#define PHY0_STAT 0x11
+#define PHY0_RX_ALIGN 0x12
+#define PHY0_RX_EQ_LO 0x13
+#define PHY0_RX_EQ_HI 0x14
+#define PHY0_BIST_LOOP 0x15
+#define PHY1_CNTRL 0x16
+#define PHY1_STAT 0x17
+#define PHY1_RX_ALIGN 0x18
+#define PHY1_RX_EQ_LO 0x19
+#define PHY1_RX_EQ_HI 0x1a
+#define PHY1_BIST_LOOP 0x1b
+#define RdExBase 0x1c
+#define RdExLimit 0x1d
+#define CacheAllocBase 0x1e
+#define CacheAllocLimit 0x1f
+#define BiuSlaveCmdGstNum 0x20
+
+/*SATA_CTL Bits */
+#define SATA_RST_N BIT(0) /* Active low reset sata_core phy */
+#define SataCtlReserve0 BIT(1)
+#define M_CSYSREQ BIT(2) /* AXI master low power, not used */
+#define S_CSYSREQ BIT(3) /* AXI slave low power, not used */
+#define P0_CP_DET BIT(8) /* Reserved, bring in from pad */
+#define P0_MP_SW BIT(9) /* Mech Switch */
+#define P0_DISABLE BIT(10) /* disable p0 */
+#define P0_ACT_LED_EN BIT(11) /* Active LED enable */
+#define P0_IRST_HARD_SYNTH BIT(12) /* PHY hard synth reset */
+#define P0_IRST_HARD_TXRX BIT(13) /* PHY lane hard reset */
+#define P0_IRST_POR BIT(14) /* PHY power on reset*/
+#define P0_IPDTXL BIT(15) /* PHY Tx lane dis/power down */
+#define P0_IPDRXL BIT(16) /* PHY Rx lane dis/power down */
+#define P0_IPDIPDMSYNTH BIT(17) /* PHY synthesizer dis/porwer down */
+#define P0_CP_POD_EN BIT(18) /* CP_POD enable */
+#define P0_AT_BYPASS BIT(19) /* P0 address translation by pass */
+#define P1_CP_DET BIT(20) /* Reserved,Cold Detect */
+#define P1_MP_SW BIT(21) /* Mech Switch */
+#define P1_DISABLE BIT(22) /* disable p1 */
+#define P1_ACT_LED_EN BIT(23) /* Active LED enable */
+#define P1_IRST_HARD_SYNTH BIT(24) /* PHY hard synth reset */
+#define P1_IRST_HARD_TXRX BIT(25) /* PHY lane hard reset */
+#define P1_IRST_POR BIT(26) /* PHY power on reset*/
+#define P1_IPDTXL BIT(27) /* PHY Tx lane dis/porwer down */
+#define P1_IPDRXL BIT(28) /* PHY Rx lane dis/porwer down */
+#define P1_IPDIPDMSYNTH BIT(29) /* PHY synthesizer dis/porwer down */
+#define P1_CP_POD_EN BIT(30)
+#define P1_AT_BYPASS BIT(31) /* P1 address translation by pass */
+
+/* Status register */
+#define M_CACTIVE BIT(0) /* m_cactive, not used */
+#define S_CACTIVE BIT(1) /* s_cactive, not used */
+#define P0_PHY_READY BIT(8) /* phy is ready */
+#define P0_CP_POD BIT(9) /* Cold PowerOn */
+#define P0_SLUMBER BIT(10) /* power mode slumber */
+#define P0_PATIAL BIT(11) /* power mode patial */
+#define P0_PHY_SIG_DET BIT(12) /* phy dignal detect */
+#define P0_PHY_CALI BIT(13) /* phy calibration done */
+#define P1_PHY_READY BIT(16) /* phy is ready */
+#define P1_CP_POD BIT(17) /* Cold PowerOn */
+#define P1_SLUMBER BIT(18) /* power mode slumber */
+#define P1_PATIAL BIT(19) /* power mode patial */
+#define P1_PHY_SIG_DET BIT(20) /* phy dignal detect */
+#define P1_PHY_CALI BIT(21) /* phy calibration done */
+
+/* SATA CR_REG_TIMER bits */
+#define CR_TIME_SCALE (0x1000 << 0)
+
+/* SATA PHY specific registers start and end address */
+#define RXCDRCALFOSC0 0x0065
+#define CALDUTY 0x006e
+#define RXDPIF 0x8065
+#define PPMDRIFTMAX_HI 0x80A4
+
+#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_sata_pcibase(node) \
+ nlm_pcicfg_base(XLP9XX_IO_SATA_OFFSET(node))
+#define nlm_get_sata_regbase(node) \
+ (nlm_get_sata_pcibase(node) + 0x100)
+
+/* SATA PHY config for register block 1 0x0065 .. 0x006e */
+static const u8 sata_phy_config1[] = {
+ 0xC9, 0xC9, 0x07, 0x07, 0x18, 0x18, 0x01, 0x01, 0x22, 0x00
+};
+
+/* SATA PHY config for register block 2 0x0x8065 .. 0x0x80A4 */
+static const u8 sata_phy_config2[] = {
+ 0xAA, 0x00, 0x4C, 0xC9, 0xC9, 0x07, 0x07, 0x18,
+ 0x18, 0x05, 0x0C, 0x10, 0x00, 0x10, 0x00, 0xFF,
+ 0xCF, 0xF7, 0xE1, 0xF5, 0xFD, 0xFD, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, 0xFD, 0xFD,
+ 0xF5, 0xF5, 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5,
+ 0xFD, 0xFD, 0xF5, 0xF5, 0xFF, 0xFF, 0xFF, 0xF5,
+ 0x3F, 0x00, 0x32, 0x00, 0x03, 0x01, 0x05, 0x05,
+ 0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04,
+};
+
+const int sata_phy_debug = 0; /* set to verify PHY writes */
+
+static void sata_clear_glue_reg(u64 regbase, u32 off, u32 bit)
+{
+ u32 reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
+}
+
+static void sata_set_glue_reg(u64 regbase, u32 off, u32 bit)
+{
+ u32 reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val | bit));
+}
+
+static void write_phy_reg(u64 regbase, u32 addr, u32 physel, u8 data)
+{
+ nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
+ (1u << 31) | (physel << 24) | (data << 16) | addr);
+ udelay(850);
+}
+
+static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel)
+{
+ u32 val;
+
+ nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
+ (0 << 31) | (physel << 24) | (0 << 16) | addr);
+ udelay(850);
+ val = nlm_read_sata_reg(regbase, PHY_MEM_ACCESS);
+ return (val >> 16) & 0xff;
+}
+
+static void config_sata_phy(u64 regbase)
+{
+ u32 port, i, reg;
+
+ for (port = 0; port < 2; port++) {
+ for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
+ write_phy_reg(regbase, reg, port, sata_phy_config1[i]);
+
+ for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
+ write_phy_reg(regbase, reg, port, sata_phy_config2[i]);
+ }
+}
+
+static void check_phy_register(u64 regbase, u32 addr, u32 physel, u8 xdata)
+{
+ u8 data;
+
+ data = read_phy_reg(regbase, addr, physel);
+ pr_info("PHY read addr = 0x%x physel = %d data = 0x%x %s\n",
+ addr, physel, data, data == xdata ? "TRUE" : "FALSE");
+}
+
+static void verify_sata_phy_config(u64 regbase)
+{
+ u32 port, i, reg;
+
+ for (port = 0; port < 2; port++) {
+ for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
+ check_phy_register(regbase, reg, port,
+ sata_phy_config1[i]);
+
+ for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
+ check_phy_register(regbase, reg, port,
+ sata_phy_config2[i]);
+ }
+}
+
+static void nlm_sata_firmware_init(int node)
+{
+ u32 reg_val;
+ u64 regbase;
+ int n;
+
+ pr_info("Initializing XLP9XX On-chip AHCI...\n");
+ regbase = nlm_get_sata_regbase(node);
+
+ /* Reset port0 */
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
+
+ /* port1 */
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
+ udelay(300);
+
+ /* Set PHY */
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
+
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
+ udelay(1000);
+
+ /* setup PHY */
+ config_sata_phy(regbase);
+ if (sata_phy_debug)
+ verify_sata_phy_config(regbase);
+
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
+ udelay(300);
+
+ /* Override reset in serial PHY mode */
+ sata_set_glue_reg(regbase, CR_REG_TIMER, CR_TIME_SCALE);
+ /* Set reset SATA */
+ sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ sata_set_glue_reg(regbase, SATA_CTL, M_CSYSREQ);
+ sata_set_glue_reg(regbase, SATA_CTL, S_CSYSREQ);
+
+ pr_debug("Waiting for PHYs to come up.\n");
+ n = 10000;
+ do {
+ reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
+ if ((reg_val & P1_PHY_READY) && (reg_val & P0_PHY_READY))
+ break;
+ udelay(10);
+ } while (--n > 0);
+
+ if (reg_val & P0_PHY_READY)
+ pr_info("PHY0 is up.\n");
+ else
+ pr_info("PHY0 is down.\n");
+ if (reg_val & P1_PHY_READY)
+ pr_info("PHY1 is up.\n");
+ else
+ pr_info("PHY1 is down.\n");
+
+ pr_info("XLP AHCI Init Done.\n");
+}
+
+static int __init nlm_ahci_init(void)
+{
+ int node;
+
+ if (!cpu_is_xlp9xx())
+ return 0;
+ for (node = 0; node < NLM_NR_NODES; node++)
+ if (nlm_node_present(node))
+ nlm_sata_firmware_init(node);
+ return 0;
+}
+
+static void nlm_sata_intr_ack(struct irq_data *data)
+{
+ u64 regbase;
+ u32 val;
+ int node;
+
+ node = data->irq / NLM_IRQS_PER_NODE;
+ regbase = nlm_get_sata_regbase(node);
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+}
+
+static void nlm_sata_fixup_bar(struct pci_dev *dev)
+{
+ dev->resource[5] = dev->resource[0];
+ memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+}
+
+static void nlm_sata_fixup_final(struct pci_dev *dev)
+{
+ u32 val;
+ u64 regbase;
+ int node;
+
+ /* Find end bridge function to find node */
+ node = xlp_socdev_to_node(dev);
+ regbase = nlm_get_sata_regbase(node);
+
+ /* clear pending interrupts and then enable them */
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+
+ /* Enable only the core interrupt */
+ sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
+
+ dev->irq = nlm_irq_to_xirq(node, PIC_SATA_IRQ);
+ nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
+}
+
+arch_initcall(nlm_ahci_init);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
+ nlm_sata_fixup_bar);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
+ nlm_sata_fixup_final);