aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-omap')
-rw-r--r--arch/arm/plat-omap/Kconfig35
-rw-r--r--arch/arm/plat-omap/Makefile6
-rw-r--r--arch/arm/plat-omap/clock.c2
-rw-r--r--arch/arm/plat-omap/common.c9
-rw-r--r--arch/arm/plat-omap/counter_32k.c16
-rw-r--r--arch/arm/plat-omap/dma.c59
-rw-r--r--arch/arm/plat-omap/dmtimer.c164
-rw-r--r--arch/arm/plat-omap/include/plat/board.h38
-rw-r--r--arch/arm/plat-omap/include/plat/clkdev_omap.h1
-rw-r--r--arch/arm/plat-omap/include/plat/clock.h2
-rw-r--r--arch/arm/plat-omap/include/plat/cpu.h92
-rw-r--r--arch/arm/plat-omap/include/plat/dmtimer.h22
-rw-r--r--arch/arm/plat-omap/include/plat/dsp.h3
-rw-r--r--arch/arm/plat-omap/include/plat/hardware.h1
-rw-r--r--arch/arm/plat-omap/include/plat/mmc.h6
-rw-r--r--arch/arm/plat-omap/include/plat/multi.h9
-rw-r--r--arch/arm/plat-omap/include/plat/mux.h2
-rw-r--r--arch/arm/plat-omap/include/plat/omap-secure.h5
-rw-r--r--arch/arm/plat-omap/include/plat/omap54xx.h32
-rw-r--r--arch/arm/plat-omap/include/plat/omap730.h102
-rw-r--r--arch/arm/plat-omap/include/plat/omap850.h102
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h21
-rw-r--r--arch/arm/plat-omap/include/plat/sdrc.h2
-rw-r--r--arch/arm/plat-omap/include/plat/serial.h14
-rw-r--r--arch/arm/plat-omap/include/plat/uncompress.h12
-rw-r--r--arch/arm/plat-omap/include/plat/usb.h196
-rw-r--r--arch/arm/plat-omap/include/plat/voltage.h21
-rw-r--r--arch/arm/plat-omap/mailbox.c13
-rw-r--r--arch/arm/plat-omap/sram.c17
-rw-r--r--arch/arm/plat-omap/usb.c145
30 files changed, 350 insertions, 799 deletions
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ad95c7a5d00..dd36eba9506 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -29,7 +29,7 @@ config ARCH_OMAP2PLUS
select USE_OF
select PROC_DEVICETREE if PROC_FS
help
- "Systems based on OMAP2, OMAP3 or OMAP4"
+ "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
endchoice
@@ -45,31 +45,30 @@ config OMAP_DEBUG_LEDS
depends on OMAP_DEBUG_DEVICES
default y if LEDS_CLASS
-config OMAP_SMARTREFLEX
- bool "SmartReflex support"
- depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+config POWER_AVS_OMAP
+ bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+ depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
help
- Say Y if you want to enable SmartReflex.
-
- SmartReflex can perform continuous dynamic voltage
- scaling around the nominal operating point voltage
- according to silicon characteristics and operating
- conditions. Enabling SmartReflex reduces power
- consumption.
+ Say Y to enable AVS(Adaptive Voltage Scaling)
+ support on OMAP containing the version 1 or
+ version 2 of the SmartReflex IP.
+ V1 is the 65nm version used in OMAP3430.
+ V2 is the update for the 45nm version of the IP used in OMAP3630
+ and OMAP4430
Please note, that by default SmartReflex is only
- initialized. To enable the automatic voltage
- compensation for vdd mpu and vdd core from user space,
+ initialized and not enabled. To enable the automatic voltage
+ compensation for vdd mpu and vdd core from user space,
user must write 1 to
- /debug/voltage/vdd_<X>/smartreflex/autocomp,
- where X is mpu or core for OMAP3.
+ /debug/smartreflex/sr_<X>/autocomp,
+ where X is mpu_iva or core for OMAP3.
Optionally autocompensation can be enabled in the kernel
by default during system init via the enable_on_init flag
which an be passed as platform data to the smartreflex driver.
-config OMAP_SMARTREFLEX_CLASS3
+config POWER_AVS_OMAP_CLASS3
bool "Class 3 mode of Smartreflex Implementation"
- depends on OMAP_SMARTREFLEX && TWL4030_CORE
+ depends on POWER_AVS_OMAP && TWL4030_CORE
help
Say Y to enable Class 3 implementation of Smartreflex
@@ -150,7 +149,7 @@ config OMAP_32K_TIMER
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
+ currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index ed8605f0115..961bf859bc0 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -4,15 +4,13 @@
# Common support
obj-y := common.o sram.o clock.o devices.o dma.o mux.o \
- usb.o fb.o counter_32k.o
+ fb.o counter_32k.o
obj-m :=
obj-n :=
obj- :=
# omap_device support (OMAP2+ only at the moment)
-obj-$(CONFIG_ARCH_OMAP2) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP3) += omap_device.o
-obj-$(CONFIG_ARCH_OMAP4) += omap_device.o
+obj-$(CONFIG_ARCH_OMAP2PLUS) += omap_device.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 62ec5c45279..706b7e29397 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
struct clk *c;
struct clk *pa;
+ mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
@@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused)
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate, c->usecount);
}
+ mutex_unlock(&clocks_mutex);
return 0;
}
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 0a9b9a97011..89a3723b353 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -77,3 +77,12 @@ void __init omap_init_consistent_dma_size(void)
init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
#endif
}
+
+/*
+ * Stub function for OMAP2 so that common files
+ * continue to build when custom builds are used
+ */
+int __weak omap_secure_ram_reserve_memblock(void)
+{
+ return 0;
+}
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 2132c4f389e..dbf1e03029a 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -29,7 +29,10 @@
#include <plat/clock.h>
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
-#define OMAP2_32KSYNCNT_CR_OFF 0x10
+#define OMAP2_32KSYNCNT_REV_OFF 0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
/*
* 32KHz clocksource ... always available, on pretty most chips except
@@ -84,9 +87,16 @@ int __init omap_init_clocksource_32k(void __iomem *vbase)
int ret;
/*
- * 32k sync Counter register offset is at 0x10
+ * 32k sync Counter IP register offsets vary between the
+ * highlander version and the legacy ones.
+ * The 'SCHEME' bits(30-31) of the revision register is used
+ * to identify the version.
*/
- sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF;
+ if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+ OMAP2_32KSYNCNT_REV_SCHEME)
+ sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
+ else
+ sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
/*
* 120000 rough estimate from the calculations in
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index cb16ade437c..7fe626761e5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -573,22 +573,25 @@ EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
static inline void omap_enable_channel_irq(int lch)
{
- u32 status;
-
/* Clear CSR */
if (cpu_class_is_omap1())
- status = p->dma_read(CSR, lch);
- else if (cpu_class_is_omap2())
+ p->dma_read(CSR, lch);
+ else
p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
/* Enable some nice interrupts. */
p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
}
-static void omap_disable_channel_irq(int lch)
+static inline void omap_disable_channel_irq(int lch)
{
- if (cpu_class_is_omap2())
- p->dma_write(0, CICR, lch);
+ /* disable channel interrupts */
+ p->dma_write(0, CICR, lch);
+ /* Clear CSR */
+ if (cpu_class_is_omap1())
+ p->dma_read(CSR, lch);
+ else
+ p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
}
void omap_enable_dma_irq(int lch, u16 bits)
@@ -632,14 +635,14 @@ static inline void disable_lnk(int lch)
l = p->dma_read(CLNK_CTRL, lch);
/* Disable interrupts */
+ omap_disable_channel_irq(lch);
+
if (cpu_class_is_omap1()) {
- p->dma_write(0, CICR, lch);
/* Set the STOP_LNK bit */
l |= 1 << 14;
}
if (cpu_class_is_omap2()) {
- omap_disable_channel_irq(lch);
/* Clear the ENABLE_LNK bit */
l &= ~(1 << 15);
}
@@ -657,6 +660,9 @@ static inline void omap2_enable_irq_lch(int lch)
return;
spin_lock_irqsave(&dma_chan_lock, flags);
+ /* clear IRQ STATUS */
+ p->dma_write(1 << lch, IRQSTATUS_L0, lch);
+ /* Enable interrupt */
val = p->dma_read(IRQENABLE_L0, lch);
val |= 1 << lch;
p->dma_write(val, IRQENABLE_L0, lch);
@@ -672,9 +678,12 @@ static inline void omap2_disable_irq_lch(int lch)
return;
spin_lock_irqsave(&dma_chan_lock, flags);
+ /* Disable interrupt */
val = p->dma_read(IRQENABLE_L0, lch);
val &= ~(1 << lch);
p->dma_write(val, IRQENABLE_L0, lch);
+ /* clear IRQ STATUS */
+ p->dma_write(1 << lch, IRQSTATUS_L0, lch);
spin_unlock_irqrestore(&dma_chan_lock, flags);
}
@@ -745,11 +754,8 @@ int omap_request_dma(int dev_id, const char *dev_name,
}
if (cpu_class_is_omap2()) {
- omap2_enable_irq_lch(free_ch);
omap_enable_channel_irq(free_ch);
- /* Clear the CSR register and IRQ status register */
- p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
- p->dma_write(1 << free_ch, IRQSTATUS_L0, 0);
+ omap2_enable_irq_lch(free_ch);
}
*dma_ch_out = free_ch;
@@ -768,27 +774,19 @@ void omap_free_dma(int lch)
return;
}
- if (cpu_class_is_omap1()) {
- /* Disable all DMA interrupts for the channel. */
- p->dma_write(0, CICR, lch);
- /* Make sure the DMA transfer is stopped. */
- p->dma_write(0, CCR, lch);
- }
-
- if (cpu_class_is_omap2()) {
+ /* Disable interrupt for logical channel */
+ if (cpu_class_is_omap2())
omap2_disable_irq_lch(lch);
- /* Clear the CSR register and IRQ status register */
- p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
- p->dma_write(1 << lch, IRQSTATUS_L0, lch);
+ /* Disable all DMA interrupts for the channel. */
+ omap_disable_channel_irq(lch);
- /* Disable all DMA interrupts for the channel. */
- p->dma_write(0, CICR, lch);
+ /* Make sure the DMA transfer is stopped. */
+ p->dma_write(0, CCR, lch);
- /* Make sure the DMA transfer is stopped. */
- p->dma_write(0, CCR, lch);
+ /* Clear registers */
+ if (cpu_class_is_omap2())
omap_clear_dma(lch);
- }
spin_lock_irqsave(&dma_chan_lock, flags);
dma_chan[lch].dev_id = -1;
@@ -943,8 +941,7 @@ void omap_stop_dma(int lch)
u32 l;
/* Disable all interrupts on the channel */
- if (cpu_class_is_omap1())
- p->dma_write(0, CICR, lch);
+ omap_disable_channel_irq(lch);
l = p->dma_read(CCR, lch);
if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 3b0cfeb33d0..626ad8cad7a 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -37,14 +37,16 @@
#include <linux/module.h>
#include <linux/io.h>
-#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/err.h>
#include <linux/pm_runtime.h>
#include <plat/dmtimer.h>
+#include <plat/omap-pm.h>
#include <mach/hardware.h>
+static u32 omap_reserved_systimers;
static LIST_HEAD(omap_timer_list);
static DEFINE_SPINLOCK(dm_timer_lock);
@@ -133,17 +135,22 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
int omap_dm_timer_prepare(struct omap_dm_timer *timer)
{
- struct dmtimer_platform_data *pdata = timer->pdev->dev.platform_data;
int ret;
- timer->fclk = clk_get(&timer->pdev->dev, "fck");
- if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
- timer->fclk = NULL;
- dev_err(&timer->pdev->dev, ": No fclk handle.\n");
- return -EINVAL;
+ /*
+ * FIXME: OMAP1 devices do not use the clock framework for dmtimers so
+ * do not call clk_get() for these devices.
+ */
+ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
+ timer->fclk = clk_get(&timer->pdev->dev, "fck");
+ if (WARN_ON_ONCE(IS_ERR_OR_NULL(timer->fclk))) {
+ timer->fclk = NULL;
+ dev_err(&timer->pdev->dev, ": No fclk handle.\n");
+ return -EINVAL;
+ }
}
- if (pdata->needs_manual_reset)
+ if (timer->capability & OMAP_TIMER_NEEDS_RESET)
omap_dm_timer_reset(timer);
ret = omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ);
@@ -152,6 +159,21 @@ int omap_dm_timer_prepare(struct omap_dm_timer *timer)
return ret;
}
+static inline u32 omap_dm_timer_reserved_systimer(int id)
+{
+ return (omap_reserved_systimers & (1 << (id - 1))) ? 1 : 0;
+}
+
+int omap_dm_timer_reserve_systimer(int id)
+{
+ if (omap_dm_timer_reserved_systimer(id))
+ return -ENODEV;
+
+ omap_reserved_systimers |= (1 << (id - 1));
+
+ return 0;
+}
+
struct omap_dm_timer *omap_dm_timer_request(void)
{
struct omap_dm_timer *timer = NULL, *t;
@@ -325,10 +347,9 @@ int omap_dm_timer_start(struct omap_dm_timer *timer)
omap_dm_timer_enable(timer);
- if (timer->loses_context) {
- u32 ctx_loss_cnt_after =
- timer->get_context_loss_count(&timer->pdev->dev);
- if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@@ -347,20 +368,18 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start);
int omap_dm_timer_stop(struct omap_dm_timer *timer)
{
unsigned long rate = 0;
- struct dmtimer_platform_data *pdata;
if (unlikely(!timer))
return -EINVAL;
- pdata = timer->pdev->dev.platform_data;
- if (!pdata->needs_manual_reset)
+ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET))
rate = clk_get_rate(timer->fclk);
__omap_dm_timer_stop(timer, timer->posted, rate);
- if (timer->loses_context && timer->get_context_loss_count)
+ if (!(timer->capability & OMAP_TIMER_ALWON))
timer->ctx_loss_count =
- timer->get_context_loss_count(&timer->pdev->dev);
+ omap_pm_get_dev_context_loss_count(&timer->pdev->dev);
/*
* Since the register values are computed and written within
@@ -378,6 +397,8 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int ret;
+ char *parent_name = NULL;
+ struct clk *fclk, *parent;
struct dmtimer_platform_data *pdata;
if (unlikely(!timer))
@@ -388,7 +409,49 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
if (source < 0 || source >= 3)
return -EINVAL;
- ret = pdata->set_timer_src(timer->pdev, source);
+ /*
+ * FIXME: Used for OMAP1 devices only because they do not currently
+ * use the clock framework to set the parent clock. To be removed
+ * once OMAP1 migrated to using clock framework for dmtimers
+ */
+ if (pdata->set_timer_src)
+ return pdata->set_timer_src(timer->pdev, source);
+
+ fclk = clk_get(&timer->pdev->dev, "fck");
+ if (IS_ERR_OR_NULL(fclk)) {
+ pr_err("%s: fck not found\n", __func__);
+ return -EINVAL;
+ }
+
+ switch (source) {
+ case OMAP_TIMER_SRC_SYS_CLK:
+ parent_name = "timer_sys_ck";
+ break;
+
+ case OMAP_TIMER_SRC_32_KHZ:
+ parent_name = "timer_32k_ck";
+ break;
+
+ case OMAP_TIMER_SRC_EXT_CLK:
+ parent_name = "timer_ext_ck";
+ break;
+ }
+
+ parent = clk_get(&timer->pdev->dev, parent_name);
+ if (IS_ERR_OR_NULL(parent)) {
+ pr_err("%s: %s not found\n", __func__, parent_name);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = clk_set_parent(fclk, parent);
+ if (IS_ERR_VALUE(ret))
+ pr_err("%s: failed to set %s as parent\n", __func__,
+ parent_name);
+
+ clk_put(parent);
+out:
+ clk_put(fclk);
return ret;
}
@@ -431,10 +494,9 @@ int omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload,
omap_dm_timer_enable(timer);
- if (timer->loses_context) {
- u32 ctx_loss_cnt_after =
- timer->get_context_loss_count(&timer->pdev->dev);
- if (ctx_loss_cnt_after != timer->ctx_loss_count)
+ if (!(timer->capability & OMAP_TIMER_ALWON)) {
+ if (omap_pm_get_dev_context_loss_count(&timer->pdev->dev) !=
+ timer->ctx_loss_count)
omap_timer_restore_context(timer);
}
@@ -627,68 +689,57 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
*/
static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
{
- int ret;
unsigned long flags;
struct omap_dm_timer *timer;
- struct resource *mem, *irq, *ioarea;
+ struct resource *mem, *irq;
+ struct device *dev = &pdev->dev;
struct dmtimer_platform_data *pdata = pdev->dev.platform_data;
if (!pdata) {
- dev_err(&pdev->dev, "%s: no platform data.\n", __func__);
+ dev_err(dev, "%s: no platform data.\n", __func__);
return -ENODEV;
}
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(!irq)) {
- dev_err(&pdev->dev, "%s: no IRQ resource.\n", __func__);
+ dev_err(dev, "%s: no IRQ resource.\n", __func__);
return -ENODEV;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!mem)) {
- dev_err(&pdev->dev, "%s: no memory resource.\n", __func__);
+ dev_err(dev, "%s: no memory resource.\n", __func__);
return -ENODEV;
}
- ioarea = request_mem_region(mem->start, resource_size(mem),
- pdev->name);
- if (!ioarea) {
- dev_err(&pdev->dev, "%s: region already claimed.\n", __func__);
- return -EBUSY;
- }
-
- timer = kzalloc(sizeof(struct omap_dm_timer), GFP_KERNEL);
+ timer = devm_kzalloc(dev, sizeof(struct omap_dm_timer), GFP_KERNEL);
if (!timer) {
- dev_err(&pdev->dev, "%s: no memory for omap_dm_timer.\n",
- __func__);
- ret = -ENOMEM;
- goto err_free_ioregion;
+ dev_err(dev, "%s: memory alloc failed!\n", __func__);
+ return -ENOMEM;
}
- timer->io_base = ioremap(mem->start, resource_size(mem));
+ timer->io_base = devm_request_and_ioremap(dev, mem);
if (!timer->io_base) {
- dev_err(&pdev->dev, "%s: ioremap failed.\n", __func__);
- ret = -ENOMEM;
- goto err_free_mem;
+ dev_err(dev, "%s: region already claimed.\n", __func__);
+ return -ENOMEM;
}
timer->id = pdev->id;
timer->irq = irq->start;
- timer->reserved = pdata->reserved;
+ timer->reserved = omap_dm_timer_reserved_systimer(timer->id);
timer->pdev = pdev;
- timer->loses_context = pdata->loses_context;
- timer->get_context_loss_count = pdata->get_context_loss_count;
+ timer->capability = pdata->timer_capability;
/* Skip pm_runtime_enable for OMAP1 */
- if (!pdata->needs_manual_reset) {
- pm_runtime_enable(&pdev->dev);
- pm_runtime_irq_safe(&pdev->dev);
+ if (!(timer->capability & OMAP_TIMER_NEEDS_RESET)) {
+ pm_runtime_enable(dev);
+ pm_runtime_irq_safe(dev);
}
if (!timer->reserved) {
- pm_runtime_get_sync(&pdev->dev);
+ pm_runtime_get_sync(dev);
__omap_dm_timer_init_regs(timer);
- pm_runtime_put(&pdev->dev);
+ pm_runtime_put(dev);
}
/* add the timer element to the list */
@@ -696,17 +747,9 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
list_add_tail(&timer->node, &omap_timer_list);
spin_unlock_irqrestore(&dm_timer_lock, flags);
- dev_dbg(&pdev->dev, "Device Probed.\n");
+ dev_dbg(dev, "Device Probed.\n");
return 0;
-
-err_free_mem:
- kfree(timer);
-
-err_free_ioregion:
- release_mem_region(mem->start, resource_size(mem));
-
- return ret;
}
/**
@@ -727,7 +770,6 @@ static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
list_for_each_entry(timer, &omap_timer_list, node)
if (timer->pdev->id == pdev->id) {
list_del(&timer->node);
- kfree(timer);
ret = 0;
break;
}
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
index 4814c5b6530..e62f20a5c0a 100644
--- a/arch/arm/plat-omap/include/plat/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -57,44 +57,6 @@ struct omap_camera_sensor_config {
int (*power_off)(void * data);
};
-struct omap_usb_config {
- /* Configure drivers according to the connectors on your board:
- * - "A" connector (rectagular)
- * ... for host/OHCI use, set "register_host".
- * - "B" connector (squarish) or "Mini-B"
- * ... for device/gadget use, set "register_dev".
- * - "Mini-AB" connector (very similar to Mini-B)
- * ... for OTG use as device OR host, initialize "otg"
- */
- unsigned register_host:1;
- unsigned register_dev:1;
- u8 otg; /* port number, 1-based: usb1 == 2 */
-
- u8 hmc_mode;
-
- /* implicitly true if otg: host supports remote wakeup? */
- u8 rwc;
-
- /* signaling pins used to talk to transceiver on usbN:
- * 0 == usbN unused
- * 2 == usb0-only, using internal transceiver
- * 3 == 3 wire bidirectional
- * 4 == 4 wire bidirectional
- * 6 == 6 wire unidirectional (or TLL)
- */
- u8 pins[3];
-
- struct platform_device *udc_device;
- struct platform_device *ohci_device;
- struct platform_device *otg_device;
-
- u32 (*usb0_init)(unsigned nwires, unsigned is_device);
- u32 (*usb1_init)(unsigned nwires);
- u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
-
- int (*ocpi_enable)(void);
-};
-
struct omap_lcd_config {
char panel_name[16];
char ctrl_name[16];
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index d0ed8c443a6..025d85a3ee8 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -39,6 +39,7 @@ struct omap_clk {
#define CK_443X (1 << 11)
#define CK_TI816X (1 << 12)
#define CK_446X (1 << 13)
+#define CK_AM33XX (1 << 14) /* AM33xx specific clocks */
#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index d0ef57c1d71..656b9862279 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -156,7 +156,6 @@ struct dpll_data {
u8 min_divider;
u16 max_divider;
u8 modes;
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
void __iomem *autoidle_reg;
void __iomem *idlest_reg;
u32 autoidle_mask;
@@ -167,7 +166,6 @@ struct dpll_data {
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
-# endif
u8 flags;
};
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 297245dba66..68b180edcff 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -9,7 +9,7 @@
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
- * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -70,6 +70,7 @@ unsigned int omap_rev(void);
* cpu_is_omap443x(): True for OMAP4430
* cpu_is_omap446x(): True for OMAP4460
* cpu_is_omap447x(): True for OMAP4470
+ * soc_is_omap543x(): True for OMAP5430, OMAP5432
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
@@ -122,6 +123,7 @@ IS_OMAP_CLASS(24xx, 0x24)
IS_OMAP_CLASS(34xx, 0x34)
IS_OMAP_CLASS(44xx, 0x44)
IS_AM_CLASS(35xx, 0x35)
+IS_OMAP_CLASS(54xx, 0x54)
IS_AM_CLASS(33xx, 0x33)
IS_TI_CLASS(81xx, 0x81)
@@ -133,6 +135,7 @@ IS_OMAP_SUBCLASS(363x, 0x363)
IS_OMAP_SUBCLASS(443x, 0x443)
IS_OMAP_SUBCLASS(446x, 0x446)
IS_OMAP_SUBCLASS(447x, 0x447)
+IS_OMAP_SUBCLASS(543x, 0x543)
IS_TI_SUBCLASS(816x, 0x816)
IS_TI_SUBCLASS(814x, 0x814)
@@ -150,12 +153,14 @@ IS_AM_SUBCLASS(335x, 0x335)
#define cpu_is_ti816x() 0
#define cpu_is_ti814x() 0
#define soc_is_am35xx() 0
-#define cpu_is_am33xx() 0
-#define cpu_is_am335x() 0
+#define soc_is_am33xx() 0
+#define soc_is_am335x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
#define cpu_is_omap446x() 0
#define cpu_is_omap447x() 0
+#define soc_is_omap54xx() 0
+#define soc_is_omap543x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
@@ -238,9 +243,7 @@ IS_AM_SUBCLASS(335x, 0x335)
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
- * cpu_is_omap330(): True for OMAP330
- * cpu_is_omap730(): True for OMAP730
- * cpu_is_omap850(): True for OMAP850
+ * cpu_is_omap310(): True for OMAP310
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1611(): True for OMAP1611
@@ -252,8 +255,6 @@ IS_AM_SUBCLASS(335x, 0x335)
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
- * cpu_is_omap3505(): True for OMAP3505
- * cpu_is_omap3517(): True for OMAP3517
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
@@ -264,8 +265,6 @@ static inline int is_omap ##type (void) \
}
IS_OMAP_TYPE(310, 0x0310)
-IS_OMAP_TYPE(730, 0x0730)
-IS_OMAP_TYPE(850, 0x0850)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1611, 0x1611)
@@ -277,12 +276,8 @@ IS_OMAP_TYPE(2422, 0x2422)
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
-#define cpu_is_omap730() 0
-#define cpu_is_omap850() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap5912() 0
@@ -293,30 +288,15 @@ IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap2422() 0
#define cpu_is_omap2423() 0
#define cpu_is_omap2430() 0
-#define cpu_is_omap3503() 0
-#define cpu_is_omap3515() 0
-#define cpu_is_omap3525() 0
-#define cpu_is_omap3530() 0
-#define cpu_is_omap3505() 0
-#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
+#define soc_is_omap5430() 0
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
+ * between 310 vs. 1510 and 1611B/5912 vs. 1710.
*/
-#if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() is_omap730()
-#endif
-
-#if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap850
-# define cpu_is_omap850() is_omap850()
-#endif
-
#if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap310
# undef cpu_is_omap1510
@@ -350,40 +330,24 @@ IS_OMAP_TYPE(3517, 0x3517)
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
# undef soc_is_am35xx
-# undef cpu_is_am33xx
-# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
-# define cpu_is_omap3503() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (!omap3_has_sgx()))
-# define cpu_is_omap3515() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (omap3_has_sgx()))
-# define cpu_is_omap3525() (cpu_is_omap3430() && \
- (!omap3_has_sgx()) && \
- (omap3_has_iva()))
-# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3517() is_omap3517()
-# define cpu_is_omap3505() (cpu_is_omap3517() && \
- !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
# define cpu_is_ti816x() is_ti816x()
# define cpu_is_ti814x() is_ti814x()
# define soc_is_am35xx() is_am35xx()
-# define cpu_is_am33xx() is_am33xx()
-# define cpu_is_am335x() is_am335x()
+#endif
+
+# if defined(CONFIG_SOC_AM33XX)
+# undef soc_is_am33xx
+# undef soc_is_am335x
+# define soc_is_am33xx() is_am33xx()
+# define soc_is_am335x() is_am335x()
#endif
# if defined(CONFIG_ARCH_OMAP4)
@@ -397,11 +361,18 @@ IS_OMAP_TYPE(3517, 0x3517)
# define cpu_is_omap447x() is_omap447x()
# endif
+# if defined(CONFIG_SOC_OMAP5)
+# undef soc_is_omap54xx
+# undef soc_is_omap543x
+# define soc_is_omap54xx() is_omap54xx()
+# define soc_is_omap543x() is_omap543x()
+#endif
+
/* Macros to detect if we have OMAP1 or OMAP2 */
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
- cpu_is_omap44xx())
+ cpu_is_omap44xx() || soc_is_omap54xx())
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
@@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP3517_CLASS 0x35170034
-#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
-
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
@@ -441,7 +408,7 @@ IS_OMAP_TYPE(3517, 0x3517)
#define AM35XX_REV_ES1_0 AM35XX_CLASS
#define AM35XX_REV_ES1_1 (AM35XX_CLASS | (0x1 << 8))
-#define AM335X_CLASS 0x33500034
+#define AM335X_CLASS 0x33500033
#define AM335X_REV_ES1_0 AM335X_CLASS
#define OMAP443X_CLASS 0x44300044
@@ -458,9 +425,14 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP447X_CLASS 0x44700044
#define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8))
+#define OMAP54XX_CLASS 0x54000054
+#define OMAP5430_REV_ES1_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x10 << 8))
+#define OMAP5432_REV_ES1_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x10 << 8))
+
void omap2xxx_check_revision(void);
void omap3xxx_check_revision(void);
void omap4xxx_check_revision(void);
+void omap5xxx_check_revision(void);
void omap3xxx_check_features(void);
void ti81xx_check_features(void);
void omap4xxx_check_features(void);
diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 5da73562e48..19e7fa577bd 100644
--- a/arch/arm/plat-omap/include/plat/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
@@ -55,23 +55,17 @@
#define OMAP_TIMER_TRIGGER_OVERFLOW 0x01
#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE 0x02
-/*
- * IP revision identifier so that Highlander IP
- * in OMAP4 can be distinguished.
- */
-#define OMAP_TIMER_IP_VERSION_1 0x1
-
/* timer capabilities used in hwmod database */
#define OMAP_TIMER_SECURE 0x80000000
#define OMAP_TIMER_ALWON 0x40000000
#define OMAP_TIMER_HAS_PWM 0x20000000
+#define OMAP_TIMER_NEEDS_RESET 0x10000000
struct omap_timer_capability_dev_attr {
u32 timer_capability;
};
struct omap_dm_timer;
-struct clk;
struct timer_regs {
u32 tidr;
@@ -96,16 +90,12 @@ struct timer_regs {
};
struct dmtimer_platform_data {
+ /* set_timer_src - Only used for OMAP1 devices */
int (*set_timer_src)(struct platform_device *pdev, int source);
- int timer_ip_version;
- u32 needs_manual_reset:1;
- bool reserved;
-
- bool loses_context;
-
- int (*get_context_loss_count)(struct device *dev);
+ u32 timer_capability;
};
+int omap_dm_timer_reserve_systimer(int id);
struct omap_dm_timer *omap_dm_timer_request(void);
struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
int omap_dm_timer_free(struct omap_dm_timer *timer);
@@ -272,13 +262,11 @@ struct omap_dm_timer {
unsigned reserved:1;
unsigned posted:1;
struct timer_regs context;
- bool loses_context;
int ctx_loss_count;
int revision;
+ u32 capability;
struct platform_device *pdev;
struct list_head node;
-
- int (*get_context_loss_count)(struct device *dev);
};
int omap_dm_timer_prepare(struct omap_dm_timer *timer);
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
index 9c604b390f9..5927709b190 100644
--- a/arch/arm/plat-omap/include/plat/dsp.h
+++ b/arch/arm/plat-omap/include/plat/dsp.h
@@ -18,6 +18,9 @@ struct omap_dsp_platform_data {
u32 (*dsp_cm_read)(s16 , u16);
u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+ void (*set_bootaddr)(u32);
+ void (*set_bootmode)(u8);
+
phys_addr_t phys_mempool_base;
phys_addr_t phys_mempool_size;
};
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index e897978371c..ddbde38e1e3 100644
--- a/arch/arm/plat-omap/include/plat/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -288,5 +288,6 @@
#include <plat/omap44xx.h>
#include <plat/ti81xx.h>
#include <plat/am33xx.h>
+#include <plat/omap54xx.h>
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index a7754a886d4..eb3e4d55534 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -81,8 +81,6 @@ struct omap_mmc_platform_data {
/* Return context loss count due to PM states changing */
int (*get_context_loss_count)(struct device *dev);
- u64 dma_mask;
-
/* Integrating attributes from the omap_hwmod layer */
u8 controller_flags;
@@ -172,8 +170,7 @@ struct omap_mmc_platform_data {
extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
int is_closed);
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
@@ -185,7 +182,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
-
#endif
extern int omap_msdi_reset(struct omap_hwmod *oh);
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index 999ffba2690..045e320f106 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -99,4 +99,13 @@
# endif
#endif
+#ifdef CONFIG_SOC_OMAP5
+# ifdef OMAP_NAME
+# undef MULTI_OMAP2
+# define MULTI_OMAP2
+# else
+# define OMAP_NAME omap5
+# endif
+#endif
+
#endif /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index aeba71796ad..32394895920 100644
--- a/arch/arm/plat-omap/include/plat/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -99,7 +99,7 @@
/*
* OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap7xx.h) regs and
* not the FUNC_MUX_CTRL_x regs from hardware.h
* - for pull-up/down, only has one enable bit which is is in the same register
* as mux config
diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h
index 8c7994ce986..0e4acd2d2de 100644
--- a/arch/arm/plat-omap/include/plat/omap-secure.h
+++ b/arch/arm/plat-omap/include/plat/omap-secure.h
@@ -3,12 +3,7 @@
#include <linux/types.h>
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
extern int omap_secure_ram_reserve_memblock(void);
-#else
-static inline void omap_secure_ram_reserve_memblock(void)
-{ }
-#endif
#ifdef CONFIG_OMAP4_ERRATA_I688
extern int omap_barrier_reserve_memblock(void);
diff --git a/arch/arm/plat-omap/include/plat/omap54xx.h b/arch/arm/plat-omap/include/plat/omap54xx.h
new file mode 100644
index 00000000000..a2582bb3cab
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap54xx.h
@@ -0,0 +1,32 @@
+/*:
+ * Address mappings and base address for OMAP5 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2012 Texas Instruments
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_SOC_OMAP54XX_H
+#define __ASM_SOC_OMAP54XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_54XX_BASE 0x4a000000
+#define L4_WK_54XX_BASE 0x4ae00000
+#define L4_PER_54XX_BASE 0x48000000
+#define L3_54XX_BASE 0x44000000
+#define OMAP54XX_32KSYNCT_BASE 0x4ae04000
+#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000
+#define OMAP54XX_CM_CORE_BASE 0x4a008000
+#define OMAP54XX_PRM_BASE 0x4ae06000
+#define OMAP54XX_PRCM_MPU_BASE 0x48243000
+#define OMAP54XX_SCM_BASE 0x4a002000
+#define OMAP54XX_CTRL_BASE 0x4a002800
+
+#endif /* __ASM_SOC_OMAP555554XX_H */
diff --git a/arch/arm/plat-omap/include/plat/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h
deleted file mode 100644
index 14272bc1a6f..00000000000
--- a/arch/arm/plat-omap/include/plat/omap730.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap730.h
- *
- * Hardware definitions for TI OMAP730 processor.
- *
- * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP730_H
-#define __ASM_ARCH_OMAP730_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP730_DSP_BASE 0xE0000000
-#define OMAP730_DSP_SIZE 0x50000
-#define OMAP730_DSP_START 0xE0000000
-
-#define OMAP730_DSPREG_BASE 0xE1000000
-#define OMAP730_DSPREG_SIZE SZ_128K
-#define OMAP730_DSPREG_START 0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_CONFIG_BASE 0xfffe1000
-#define OMAP730_IO_CONF_0 0xfffe1070
-#define OMAP730_IO_CONF_1 0xfffe1074
-#define OMAP730_IO_CONF_2 0xfffe1078
-#define OMAP730_IO_CONF_3 0xfffe107c
-#define OMAP730_IO_CONF_4 0xfffe1080
-#define OMAP730_IO_CONF_5 0xfffe1084
-#define OMAP730_IO_CONF_6 0xfffe1088
-#define OMAP730_IO_CONF_7 0xfffe108c
-#define OMAP730_IO_CONF_8 0xfffe1090
-#define OMAP730_IO_CONF_9 0xfffe1094
-#define OMAP730_IO_CONF_10 0xfffe1098
-#define OMAP730_IO_CONF_11 0xfffe109c
-#define OMAP730_IO_CONF_12 0xfffe10a0
-#define OMAP730_IO_CONF_13 0xfffe10a4
-
-#define OMAP730_MODE_1 0xfffe1010
-#define OMAP730_MODE_2 0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP730_MODE2_OFFSET 0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_FLASH_CFG_0 0xfffecc10
-#define OMAP730_FLASH_ACFG_0 0xfffecc50
-#define OMAP730_FLASH_CFG_1 0xfffecc14
-#define OMAP730_FLASH_ACFG_1 0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_ICR_BASE 0xfffbb800
-#define OMAP730_DSP_M_CTL 0xfffbb804
-#define OMAP730_DSP_MMU_BASE 0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP730 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP730_PCC_UPLD_CTRL_BASE (0xfffe0900)
-#define OMAP730_PCC_UPLD_CTRL (OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /* __ASM_ARCH_OMAP730_H */
-
diff --git a/arch/arm/plat-omap/include/plat/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h
deleted file mode 100644
index c33f6798171..00000000000
--- a/arch/arm/plat-omap/include/plat/omap850.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* arch/arm/plat-omap/include/mach/omap850.h
- *
- * Hardware definitions for TI OMAP850 processor.
- *
- * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_OMAP850_H
-#define __ASM_ARCH_OMAP850_H
-
-/*
- * ----------------------------------------------------------------------------
- * Base addresses
- * ----------------------------------------------------------------------------
- */
-
-/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
-
-#define OMAP850_DSP_BASE 0xE0000000
-#define OMAP850_DSP_SIZE 0x50000
-#define OMAP850_DSP_START 0xE0000000
-
-#define OMAP850_DSPREG_BASE 0xE1000000
-#define OMAP850_DSPREG_SIZE SZ_128K
-#define OMAP850_DSPREG_START 0xE1000000
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 specific configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_CONFIG_BASE 0xfffe1000
-#define OMAP850_IO_CONF_0 0xfffe1070
-#define OMAP850_IO_CONF_1 0xfffe1074
-#define OMAP850_IO_CONF_2 0xfffe1078
-#define OMAP850_IO_CONF_3 0xfffe107c
-#define OMAP850_IO_CONF_4 0xfffe1080
-#define OMAP850_IO_CONF_5 0xfffe1084
-#define OMAP850_IO_CONF_6 0xfffe1088
-#define OMAP850_IO_CONF_7 0xfffe108c
-#define OMAP850_IO_CONF_8 0xfffe1090
-#define OMAP850_IO_CONF_9 0xfffe1094
-#define OMAP850_IO_CONF_10 0xfffe1098
-#define OMAP850_IO_CONF_11 0xfffe109c
-#define OMAP850_IO_CONF_12 0xfffe10a0
-#define OMAP850_IO_CONF_13 0xfffe10a4
-
-#define OMAP850_MODE_1 0xfffe1010
-#define OMAP850_MODE_2 0xfffe1014
-
-/* CSMI specials: in terms of base + offset */
-#define OMAP850_MODE2_OFFSET 0x14
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 traffic controller configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_FLASH_CFG_0 0xfffecc10
-#define OMAP850_FLASH_ACFG_0 0xfffecc50
-#define OMAP850_FLASH_CFG_1 0xfffecc14
-#define OMAP850_FLASH_ACFG_1 0xfffecc54
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 DSP control registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_ICR_BASE 0xfffbb800
-#define OMAP850_DSP_M_CTL 0xfffbb804
-#define OMAP850_DSP_MMU_BASE 0xfffed200
-
-/*
- * ----------------------------------------------------------------------------
- * OMAP850 PCC_UPLD configuration registers
- * ----------------------------------------------------------------------------
- */
-#define OMAP850_PCC_UPLD_CTRL_BASE (0xfffe0900)
-#define OMAP850_PCC_UPLD_CTRL (OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
-
-#endif /* __ASM_ARCH_OMAP850_H */
-
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index c835b7194ff..6132972aff3 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -41,6 +41,7 @@ struct omap_device;
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3;
/*
* OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
@@ -69,6 +70,17 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
#define SYSC_TYPE2_SIDLEMODE_MASK (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
#define SYSC_TYPE2_MIDLEMODE_SHIFT 4
#define SYSC_TYPE2_MIDLEMODE_MASK (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+#define SYSC_TYPE2_DMADISABLE_SHIFT 16
+#define SYSC_TYPE2_DMADISABLE_MASK (0x1 << SYSC_TYPE2_DMADISABLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE3.
+ * This is applicable for some IPs present in AM33XX
+ */
+#define SYSC_TYPE3_SIDLEMODE_SHIFT 0
+#define SYSC_TYPE3_SIDLEMODE_MASK (0x3 << SYSC_TYPE3_SIDLEMODE_SHIFT)
+#define SYSC_TYPE3_MIDLEMODE_SHIFT 2
+#define SYSC_TYPE3_MIDLEMODE_MASK (0x3 << SYSC_TYPE3_MIDLEMODE_SHIFT)
/* OCP SYSSTATUS bit shifts/masks */
#define SYSS_RESETDONE_SHIFT 0
@@ -283,6 +295,7 @@ struct omap_hwmod_ocp_if {
#define SYSS_HAS_RESET_STATUS (1 << 7)
#define SYSC_NO_CACHE (1 << 8) /* XXX SW flag, belongs elsewhere */
#define SYSC_HAS_RESET_STATUS (1 << 9)
+#define SYSC_HAS_DMADISABLE (1 << 10)
/* omap_hwmod_sysconfig.clockact flags */
#define CLOCKACT_TEST_BOTH 0x0
@@ -298,6 +311,7 @@ struct omap_hwmod_ocp_if {
* @enwkup_shift: Offset of the enawakeup bit
* @srst_shift: Offset of the softreset bit
* @autoidle_shift: Offset of the autoidle bit
+ * @dmadisable_shift: Offset of the dmadisable bit
*/
struct omap_hwmod_sysc_fields {
u8 midle_shift;
@@ -306,6 +320,7 @@ struct omap_hwmod_sysc_fields {
u8 enwkup_shift;
u8 srst_shift;
u8 autoidle_shift;
+ u8 dmadisable_shift;
};
/**
@@ -374,11 +389,13 @@ struct omap_hwmod_omap2_prcm {
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_reg: PRCM address of the clock control register
* @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @rstst_reg: (AM33XX only) address of the XXX_RSTST register in the PRM
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
u16 clkctrl_offs;
u16 rstctrl_offs;
+ u16 rstst_offs;
u16 context_offs;
u8 submodule_wkdep_bit;
u8 modulemode;
@@ -629,6 +646,10 @@ int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
int omap_hwmod_pad_route_irq(struct omap_hwmod *oh, int pad_idx, int irq_idx);
+extern void __init omap_hwmod_init(void);
+
+const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
+
/*
* Chip variant-specific hwmod init routines - XXX should be converted
* to use initcalls once the initial boot ordering is straightened out
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 9bb978ecd88..36d6a766621 100644
--- a/arch/arm/plat-omap/include/plat/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -123,7 +123,7 @@ struct omap_sdrc_params {
u32 mr;
};
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#ifdef CONFIG_SOC_HAS_OMAP2_SDRC
void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#else
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index b073e5f2b19..65fce44dce3 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -60,6 +60,17 @@
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
+/* AM33XX serial port */
+#define AM33XX_UART1_BASE 0x44E09000
+
+/* OMAP5 serial ports */
+#define OMAP5_UART1_BASE OMAP2_UART1_BASE
+#define OMAP5_UART2_BASE OMAP2_UART2_BASE
+#define OMAP5_UART3_BASE OMAP4_UART3_BASE
+#define OMAP5_UART4_BASE OMAP4_UART4_BASE
+#define OMAP5_UART5_BASE 0x48066000
+#define OMAP5_UART6_BASE 0x48068000
+
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
#define ZOOM_UART_VIRT 0xfa400000
@@ -93,6 +104,9 @@
#define TI81XXUART1 81
#define TI81XXUART2 82
#define TI81XXUART3 83
+#define AM33XXUART1 84
+#define OMAP5UART3 OMAP4UART3
+#define OMAP5UART4 OMAP4UART4
#define ZOOM_UART 95 /* Only on zoom2/3 */
/* This is only used by 8250.c for omap1510 */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index cc3f11ba7a9..b8d19a13678 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -95,6 +95,9 @@ static inline void flush(void)
_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, \
OMAP4UART##p)
+#define DEBUG_LL_OMAP5(p, mach) \
+ _DEBUG_LL_ENTRY(mach, OMAP5_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ OMAP5UART##p)
/* Zoom2/3 shift is different for UART1 and external port */
#define DEBUG_LL_ZOOM(mach) \
_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
@@ -103,6 +106,10 @@ static inline void flush(void)
_DEBUG_LL_ENTRY(mach, TI81XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
TI81XXUART##p)
+#define DEBUG_LL_AM33XX(p, mach) \
+ _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \
+ AM33XXUART##p)
+
static inline void __arch_decomp_setup(unsigned long arch_id)
{
int port = 0;
@@ -173,6 +180,9 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
DEBUG_LL_OMAP4(3, omap_4430sdp);
DEBUG_LL_OMAP4(3, omap4_panda);
+ /* omap5 based boards using UART3 */
+ DEBUG_LL_OMAP5(3, omap5_sevm);
+
/* zoom2/3 external uart */
DEBUG_LL_ZOOM(omap_zoom2);
DEBUG_LL_ZOOM(omap_zoom3);
@@ -183,6 +193,8 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
/* TI8148 base boards using UART1 */
DEBUG_LL_TI81XX(1, ti8148evm);
+ /* AM33XX base boards using UART1 */
+ DEBUG_LL_AM33XX(1, am335xevm);
} while (0);
}
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 762eeb0626c..548a4c8d63d 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -44,6 +44,8 @@ struct usbhs_omap_board_data {
struct regulator *regulator[OMAP3_HS_USB_PORTS];
};
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
struct ehci_hcd_omap_platform_data {
enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS];
int reset_gpio_port[OMAP3_HS_USB_PORTS];
@@ -64,26 +66,6 @@ struct usbhs_omap_platform_data {
};
/*-------------------------------------------------------------------------*/
-#define OMAP1_OTG_BASE 0xfffb0400
-#define OMAP1_UDC_BASE 0xfffb4000
-#define OMAP1_OHCI_BASE 0xfffba000
-
-#define OMAP2_OHCI_BASE 0x4805e000
-#define OMAP2_UDC_BASE 0x4805e200
-#define OMAP2_OTG_BASE 0x4805e300
-
-#ifdef CONFIG_ARCH_OMAP1
-
-#define OTG_BASE OMAP1_OTG_BASE
-#define UDC_BASE OMAP1_UDC_BASE
-#define OMAP_OHCI_BASE OMAP1_OHCI_BASE
-
-#else
-
-#define OTG_BASE OMAP2_OTG_BASE
-#define UDC_BASE OMAP2_UDC_BASE
-#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-
struct omap_musb_board_data {
u8 interface_type;
u8 mode;
@@ -107,44 +89,6 @@ extern int omap4430_phy_init(struct device *dev);
extern int omap4430_phy_exit(struct device *dev);
extern int omap4430_phy_suspend(struct device *dev, int suspend);
-/*
- * NOTE: Please update omap USB drivers to use ioremap + read/write
- */
-
-#define OMAP2_L4_IO_OFFSET 0xb2000000
-#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET)
-
-static inline u8 omap_readb(u32 pa)
-{
- return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline u16 omap_readw(u32 pa)
-{
- return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline u32 omap_readl(u32 pa)
-{
- return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline void omap_writeb(u8 v, u32 pa)
-{
- __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-
-static inline void omap_writew(u16 v, u32 pa)
-{
- __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
-static inline void omap_writel(u32 v, u32 pa)
-{
- __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-
#endif
extern void am35x_musb_reset(void);
@@ -153,142 +97,6 @@ extern void am35x_musb_clear_irq(void);
extern void am35x_set_mode(u8 musb_mode);
extern void ti81xx_musb_phy_power(u8 on);
-/*
- * FIXME correct answer depends on hmc_mode,
- * as does (on omap1) any nonzero value for config->otg port number
- */
-#ifdef CONFIG_USB_GADGET_OMAP
-#define is_usb0_device(config) 1
-#else
-#define is_usb0_device(config) 0
-#endif
-
-void omap_otg_init(struct omap_usb_config *config);
-
-#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
-void omap1_usb_init(struct omap_usb_config *pdata);
-#else
-static inline void omap1_usb_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
-void omap2_usbfs_init(struct omap_usb_config *pdata);
-#else
-static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
-{
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OTG and transceiver registers, for OMAPs starting with ARM926
- */
-#define OTG_REV (OTG_BASE + 0x00)
-#define OTG_SYSCON_1 (OTG_BASE + 0x04)
-# define USB2_TRX_MODE(w) (((w)>>24)&0x07)
-# define USB1_TRX_MODE(w) (((w)>>20)&0x07)
-# define USB0_TRX_MODE(w) (((w)>>16)&0x07)
-# define OTG_IDLE_EN (1 << 15)
-# define HST_IDLE_EN (1 << 14)
-# define DEV_IDLE_EN (1 << 13)
-# define OTG_RESET_DONE (1 << 2)
-# define OTG_SOFT_RESET (1 << 1)
-#define OTG_SYSCON_2 (OTG_BASE + 0x08)
-# define OTG_EN (1 << 31)
-# define USBX_SYNCHRO (1 << 30)
-# define OTG_MST16 (1 << 29)
-# define SRP_GPDATA (1 << 28)
-# define SRP_GPDVBUS (1 << 27)
-# define SRP_GPUVBUS(w) (((w)>>24)&0x07)
-# define A_WAIT_VRISE(w) (((w)>>20)&0x07)
-# define B_ASE_BRST(w) (((w)>>16)&0x07)
-# define SRP_DPW (1 << 14)
-# define SRP_DATA (1 << 13)
-# define SRP_VBUS (1 << 12)
-# define OTG_PADEN (1 << 10)
-# define HMC_PADEN (1 << 9)
-# define UHOST_EN (1 << 8)
-# define HMC_TLLSPEED (1 << 7)
-# define HMC_TLLATTACH (1 << 6)
-# define OTG_HMC(w) (((w)>>0)&0x3f)
-#define OTG_CTRL (OTG_BASE + 0x0c)
-# define OTG_USB2_EN (1 << 29)
-# define OTG_USB2_DP (1 << 28)
-# define OTG_USB2_DM (1 << 27)
-# define OTG_USB1_EN (1 << 26)
-# define OTG_USB1_DP (1 << 25)
-# define OTG_USB1_DM (1 << 24)
-# define OTG_USB0_EN (1 << 23)
-# define OTG_USB0_DP (1 << 22)
-# define OTG_USB0_DM (1 << 21)
-# define OTG_ASESSVLD (1 << 20)
-# define OTG_BSESSEND (1 << 19)
-# define OTG_BSESSVLD (1 << 18)
-# define OTG_VBUSVLD (1 << 17)
-# define OTG_ID (1 << 16)
-# define OTG_DRIVER_SEL (1 << 15)
-# define OTG_A_SETB_HNPEN (1 << 12)
-# define OTG_A_BUSREQ (1 << 11)
-# define OTG_B_HNPEN (1 << 9)
-# define OTG_B_BUSREQ (1 << 8)
-# define OTG_BUSDROP (1 << 7)
-# define OTG_PULLDOWN (1 << 5)
-# define OTG_PULLUP (1 << 4)
-# define OTG_DRV_VBUS (1 << 3)
-# define OTG_PD_VBUS (1 << 2)
-# define OTG_PU_VBUS (1 << 1)
-# define OTG_PU_ID (1 << 0)
-#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */
-# define DRIVER_SWITCH (1 << 15)
-# define A_VBUS_ERR (1 << 13)
-# define A_REQ_TMROUT (1 << 12)
-# define A_SRP_DETECT (1 << 11)
-# define B_HNP_FAIL (1 << 10)
-# define B_SRP_TMROUT (1 << 9)
-# define B_SRP_DONE (1 << 8)
-# define B_SRP_STARTED (1 << 7)
-# define OPRT_CHG (1 << 0)
-#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */
- // same bits as in IRQ_EN
-#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */
-# define OTGVPD (1 << 14)
-# define OTGVPU (1 << 13)
-# define OTGPUID (1 << 12)
-# define USB2VDR (1 << 10)
-# define USB2PDEN (1 << 9)
-# define USB2PUEN (1 << 8)
-# define USB1VDR (1 << 6)
-# define USB1PDEN (1 << 5)
-# define USB1PUEN (1 << 4)
-# define USB0VDR (1 << 2)
-# define USB0PDEN (1 << 1)
-# define USB0PUEN (1 << 0)
-#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */
-#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */
-
-/*-------------------------------------------------------------------------*/
-
-/* OMAP1 */
-#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064)
-# define CONF_USB2_UNI_R (1 << 8)
-# define CONF_USB1_UNI_R (1 << 7)
-# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7)
-# define CONF_USB0_ISOLATE_R (1 << 3)
-# define CONF_USB_PWRDN_DM_R (1 << 2)
-# define CONF_USB_PWRDN_DP_R (1 << 1)
-
-/* OMAP2 */
-# define USB_UNIDIR 0x0
-# define USB_UNIDIR_TLL 0x1
-# define USB_BIDIR 0x2
-# define USB_BIDIR_TLL 0x3
-# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2)))
-# define USBT2TLL5PI (1 << 17)
-# define USB0PUENACTLOI (1 << 16)
-# define USBSTANDBYCTRL (1 << 15)
/* AM35x */
/* USB 2.0 PHY Control */
#define CONF2_PHY_GPIOMODE (1 << 23)
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
index 0a6a482ec01..5be4d5def42 100644
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -11,10 +11,29 @@
#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
#define __ARCH_ARM_OMAP_VOLTAGE_H
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal: The possible voltage value in uV
+ * @sr_efuse_offs: The offset of the efuse register(from system
+ * control module base address) from where to read
+ * the n-target value for the smartreflex module.
+ * @sr_errminlimit: Error min limit value for smartreflex. This value
+ * differs at differnet opp and thus is linked
+ * with voltage.
+ * @vp_errorgain: Error gain value for the voltage processor. This
+ * field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+ u32 volt_nominal;
+ u32 sr_efuse_offs;
+ u8 sr_errminlimit;
+ u8 vp_errgain;
+};
struct voltagedomain;
struct voltagedomain *voltdm_lookup(const char *name);
int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+ unsigned long volt);
#endif
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index ad32621aa52..5e13c3884aa 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -282,6 +282,8 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
}
mbox->rxq = mq;
mq->mbox = mbox;
+
+ omap_mbox_enable_irq(mbox, IRQ_RX);
}
mutex_unlock(&mbox_configured_lock);
return 0;
@@ -305,6 +307,7 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
mutex_lock(&mbox_configured_lock);
if (!--mbox->use_count) {
+ omap_mbox_disable_irq(mbox, IRQ_RX);
free_irq(mbox->irq, mbox);
tasklet_kill(&mbox->txq->tasklet);
flush_work_sync(&mbox->rxq->work);
@@ -338,13 +341,15 @@ struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
if (!mbox)
return ERR_PTR(-ENOENT);
- ret = omap_mbox_startup(mbox);
- if (ret)
- return ERR_PTR(-ENODEV);
-
if (nb)
blocking_notifier_chain_register(&mbox->notifier, nb);
+ ret = omap_mbox_startup(mbox);
+ if (ret) {
+ blocking_notifier_chain_unregister(&mbox->notifier, nb);
+ return ERR_PTR(-ENODEV);
+ }
+
return mbox;
}
EXPORT_SYMBOL(omap_mbox_get);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 477363c163e..766181cb5c9 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -6,8 +6,8 @@
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -44,6 +44,7 @@
#else
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#endif
+#define OMAP5_SRAM_PA 0x40300000
#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -85,7 +86,7 @@ static int is_sram_locked(void)
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
}
- if (cpu_is_omap34xx() && !cpu_is_am33xx()) {
+ if (cpu_is_omap34xx()) {
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
@@ -118,12 +119,15 @@ static void __init omap_detect_sram(void)
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
- if (cpu_is_am33xx()) {
+ if (soc_is_am33xx()) {
omap_sram_start = AM33XX_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap34xx()) {
@@ -132,6 +136,9 @@ static void __init omap_detect_sram(void)
} else if (cpu_is_omap44xx()) {
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
+ } else if (soc_is_omap54xx()) {
+ omap_sram_start = OMAP5_SRAM_PA;
+ omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
@@ -386,7 +393,7 @@ int __init omap_sram_init(void)
omap242x_sram_init();
else if (cpu_is_omap2430())
omap243x_sram_init();
- else if (cpu_is_am33xx())
+ else if (soc_is_am33xx())
am33xx_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
deleted file mode 100644
index daa0327381b..00000000000
--- a/arch/arm/plat-omap/usb.c
+++ /dev/null
@@ -1,145 +0,0 @@
- /*
- * arch/arm/plat-omap/usb.c -- platform level USB initialization
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <plat/usb.h>
-#include <plat/board.h>
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_OMAP_OTG
-
-void __init
-omap_otg_init(struct omap_usb_config *config)
-{
- u32 syscon;
- int alt_pingroup = 0;
-
- /* NOTE: no bus or clock setup (yet?) */
-
- syscon = omap_readl(OTG_SYSCON_1) & 0xffff;
- if (!(syscon & OTG_RESET_DONE))
- pr_debug("USB resets not complete?\n");
-
- //omap_writew(0, OTG_IRQ_EN);
-
- /* pin muxing and transceiver pinouts */
- if (config->pins[0] > 2) /* alt pingroup 2 */
- alt_pingroup = 1;
- syscon |= config->usb0_init(config->pins[0], is_usb0_device(config));
- syscon |= config->usb1_init(config->pins[1]);
- syscon |= config->usb2_init(config->pins[2], alt_pingroup);
- pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
- omap_writel(syscon, OTG_SYSCON_1);
-
- syscon = config->hmc_mode;
- syscon |= USBX_SYNCHRO | (4 << 16) /* B_ASE0_BRST */;
-#ifdef CONFIG_USB_OTG
- if (config->otg)
- syscon |= OTG_EN;
-#endif
- if (cpu_class_is_omap1())
- pr_debug("USB_TRANSCEIVER_CTRL = %03x\n",
- omap_readl(USB_TRANSCEIVER_CTRL));
- pr_debug("OTG_SYSCON_2 = %08x\n", omap_readl(OTG_SYSCON_2));
- omap_writel(syscon, OTG_SYSCON_2);
-
- printk("USB: hmc %d", config->hmc_mode);
- if (!alt_pingroup)
- printk(", usb2 alt %d wires", config->pins[2]);
- else if (config->pins[0])
- printk(", usb0 %d wires%s", config->pins[0],
- is_usb0_device(config) ? " (dev)" : "");
- if (config->pins[1])
- printk(", usb1 %d wires", config->pins[1]);
- if (!alt_pingroup && config->pins[2])
- printk(", usb2 %d wires", config->pins[2]);
- if (config->otg)
- printk(", Mini-AB on usb%d", config->otg - 1);
- printk("\n");
-
- if (cpu_class_is_omap1()) {
- u16 w;
-
- /* leave USB clocks/controllers off until needed */
- w = omap_readw(ULPD_SOFT_REQ);
- w &= ~SOFT_USB_CLK_REQ;
- omap_writew(w, ULPD_SOFT_REQ);
-
- w = omap_readw(ULPD_CLOCK_CTRL);
- w &= ~USB_MCLK_EN;
- w |= DIS_USB_PVCI_CLK;
- omap_writew(w, ULPD_CLOCK_CTRL);
- }
- syscon = omap_readl(OTG_SYSCON_1);
- syscon |= HST_IDLE_EN|DEV_IDLE_EN|OTG_IDLE_EN;
-
-#ifdef CONFIG_USB_GADGET_OMAP
- if (config->otg || config->register_dev) {
- struct platform_device *udc_device = config->udc_device;
- int status;
-
- syscon &= ~DEV_IDLE_EN;
- udc_device->dev.platform_data = config;
- status = platform_device_register(udc_device);
- if (status)
- pr_debug("can't register UDC device, %d\n", status);
- }
-#endif
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- if (config->otg || config->register_host) {
- struct platform_device *ohci_device = config->ohci_device;
- int status;
-
- syscon &= ~HST_IDLE_EN;
- ohci_device->dev.platform_data = config;
- status = platform_device_register(ohci_device);
- if (status)
- pr_debug("can't register OHCI device, %d\n", status);
- }
-#endif
-
-#ifdef CONFIG_USB_OTG
- if (config->otg) {
- struct platform_device *otg_device = config->otg_device;
- int status;
-
- syscon &= ~OTG_IDLE_EN;
- otg_device->dev.platform_data = config;
- status = platform_device_register(otg_device);
- if (status)
- pr_debug("can't register OTG device, %d\n", status);
- }
-#endif
- pr_debug("OTG_SYSCON_1 = %08x\n", omap_readl(OTG_SYSCON_1));
- omap_writel(syscon, OTG_SYSCON_1);
-}
-
-#else
-void omap_otg_init(struct omap_usb_config *config) {}
-#endif