aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorAlexandre Bounine <alexandre.bounine@idt.com>2012-05-31 16:26:38 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-31 17:49:31 -0700
commite42d98ebe7d754a2c9fbccd6186721d3ca8679f6 (patch)
treeeed734672410f2eb8fab07fbd14f88bfaf8a882f /drivers
parentce2d52cc1364a22fc1a161781e60ee3cbb499a6d (diff)
downloadlinux-e42d98ebe7d754a2c9fbccd6186721d3ca8679f6.tar.gz
rapidio: add DMA engine support for RIO data transfers
Adds DMA Engine framework support into RapidIO subsystem. Uses DMA Engine DMA_SLAVE interface to generate data transfers to/from remote RapidIO target devices. Introduces RapidIO-specific wrapper for prep_slave_sg() interface with an extra parameter to pass target specific information. Uses scatterlist to describe local data buffer. Address flat data buffer on a remote side. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Dan Williams <dan.j.williams@intel.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Li Yang <leoli@freescale.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/rapidio/Kconfig14
-rw-r--r--drivers/rapidio/rio.c81
2 files changed, 95 insertions, 0 deletions
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index bc871923879..6194d35ebb9 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -22,6 +22,20 @@ config RAPIDIO_ENABLE_RX_TX_PORTS
ports for Input/Output direction to allow other traffic
than Maintenance transfers.
+config RAPIDIO_DMA_ENGINE
+ bool "DMA Engine support for RapidIO"
+ depends on RAPIDIO
+ select DMADEVICES
+ select DMA_ENGINE
+ help
+ Say Y here if you want to use DMA Engine frameork for RapidIO data
+ transfers to/from target RIO devices. RapidIO uses NREAD and
+ NWRITE (NWRITE_R, SWRITE) requests to transfer data between local
+ memory and memory on remote target device. You need a DMA controller
+ capable to perform data transfers to/from RapidIO.
+
+ If you are unsure about this, say Y here.
+
config RAPIDIO_DEBUG
bool "RapidIO subsystem debug messages"
depends on RAPIDIO
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 86c9a091a2f..c40665a4fa3 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1121,6 +1121,87 @@ int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
return 0;
}
+#ifdef CONFIG_RAPIDIO_DMA_ENGINE
+
+static bool rio_chan_filter(struct dma_chan *chan, void *arg)
+{
+ struct rio_dev *rdev = arg;
+
+ /* Check that DMA device belongs to the right MPORT */
+ return (rdev->net->hport ==
+ container_of(chan->device, struct rio_mport, dma));
+}
+
+/**
+ * rio_request_dma - request RapidIO capable DMA channel that supports
+ * specified target RapidIO device.
+ * @rdev: RIO device control structure
+ *
+ * Returns pointer to allocated DMA channel or NULL if failed.
+ */
+struct dma_chan *rio_request_dma(struct rio_dev *rdev)
+{
+ dma_cap_mask_t mask;
+ struct dma_chan *dchan;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ dchan = dma_request_channel(mask, rio_chan_filter, rdev);
+
+ return dchan;
+}
+EXPORT_SYMBOL_GPL(rio_request_dma);
+
+/**
+ * rio_release_dma - release specified DMA channel
+ * @dchan: DMA channel to release
+ */
+void rio_release_dma(struct dma_chan *dchan)
+{
+ dma_release_channel(dchan);
+}
+EXPORT_SYMBOL_GPL(rio_release_dma);
+
+/**
+ * rio_dma_prep_slave_sg - RapidIO specific wrapper
+ * for device_prep_slave_sg callback defined by DMAENGINE.
+ * @rdev: RIO device control structure
+ * @dchan: DMA channel to configure
+ * @data: RIO specific data descriptor
+ * @direction: DMA data transfer direction (TO or FROM the device)
+ * @flags: dmaengine defined flags
+ *
+ * Initializes RapidIO capable DMA channel for the specified data transfer.
+ * Uses DMA channel private extension to pass information related to remote
+ * target RIO device.
+ * Returns pointer to DMA transaction descriptor or NULL if failed.
+ */
+struct dma_async_tx_descriptor *rio_dma_prep_slave_sg(struct rio_dev *rdev,
+ struct dma_chan *dchan, struct rio_dma_data *data,
+ enum dma_transfer_direction direction, unsigned long flags)
+{
+ struct dma_async_tx_descriptor *txd = NULL;
+ struct rio_dma_ext rio_ext;
+
+ if (dchan->device->device_prep_slave_sg == NULL) {
+ pr_err("%s: prep_rio_sg == NULL\n", __func__);
+ return NULL;
+ }
+
+ rio_ext.destid = rdev->destid;
+ rio_ext.rio_addr_u = data->rio_addr_u;
+ rio_ext.rio_addr = data->rio_addr;
+ rio_ext.wr_type = data->wr_type;
+
+ txd = dmaengine_prep_rio_sg(dchan, data->sg, data->sg_len,
+ direction, flags, &rio_ext);
+
+ return txd;
+}
+EXPORT_SYMBOL_GPL(rio_dma_prep_slave_sg);
+
+#endif /* CONFIG_RAPIDIO_DMA_ENGINE */
+
static void rio_fixup_device(struct rio_dev *dev)
{
}