aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-09-28 10:09:33 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-09-28 10:09:33 -0700
commit6672d90fe779dc0dfffe027c3ede12609df091c2 (patch)
tree84e6984204030bf15685a5c26155f5731aaab244 /drivers
parent7596824e6626c62557b9eb6411ee74fec68b8ff9 (diff)
parentdf555b665367f9de6c04826acc482096f17c243d (diff)
downloadlinux-6672d90fe779dc0dfffe027c3ede12609df091c2.tar.gz
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David S Miller: 1) Netfilter xt_limit module can use uninitialized rules, from Jan Engelhardt. 2) Wei Yongjun has found several more spots where error pointers were treated as NULL/non-NULL and vice versa. 3) bnx2x was converted to pci_io{,un}map() but one remaining plain iounmap() got missed. From Neil Horman. 4) Due to a fence-post type error in initialization of inetpeer entries (which is where we store the ICMP rate limiting information), we can erroneously drop ICMPs if the inetpeer was created right around when jiffies wraps. Fix from Nicolas Dichtel. 5) smsc75xx resume fix from Steve Glendinnig. 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut. 7) qlcnic uses msleep() with locks held, fix from Narendra K. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netdev: octeon: fix return value check in octeon_mgmt_init_phy() inetpeer: fix token initialization qlcnic: Fix scheduling while atomic bug bnx2: Clean up remaining iounmap net: phy: smsc: Implement PHY config_init for LAN87xx smsc75xx: fix resume after device reset netdev: pasemi: fix return value check in pasemi_mac_phy_init() team: fix return value check l2tp: fix return value check netfilter: xt_limit: have r->cost != 0 case work
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/ethernet/broadcom/bnx2.c2
-rw-r--r--drivers/net/ethernet/octeon/octeon_mgmt.c4
-rw-r--r--drivers/net/ethernet/pasemi/pasemi_mac.c4
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c4
-rw-r--r--drivers/net/phy/smsc.c28
-rw-r--r--drivers/net/team/team.c12
-rw-r--r--drivers/net/usb/smsc75xx.c1
7 files changed, 40 insertions, 15 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index 79cebd8525c..e48312f2305 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8564,7 +8564,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
error:
- iounmap(bp->regview);
+ pci_iounmap(pdev, bp->regview);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
diff --git a/drivers/net/ethernet/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c
index c42bbb16cda..a688a2ddcfd 100644
--- a/drivers/net/ethernet/octeon/octeon_mgmt.c
+++ b/drivers/net/ethernet/octeon/octeon_mgmt.c
@@ -722,10 +722,8 @@ static int octeon_mgmt_init_phy(struct net_device *netdev)
octeon_mgmt_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
- if (IS_ERR(p->phydev)) {
- p->phydev = NULL;
+ if (!p->phydev)
return -1;
- }
phy_start_aneg(p->phydev);
diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c
index e559dfa06d6..6fa74d530e4 100644
--- a/drivers/net/ethernet/pasemi/pasemi_mac.c
+++ b/drivers/net/ethernet/pasemi/pasemi_mac.c
@@ -1101,9 +1101,9 @@ static int pasemi_mac_phy_init(struct net_device *dev)
phydev = of_phy_connect(dev, phy_dn, &pasemi_adjust_link, 0,
PHY_INTERFACE_MODE_SGMII);
- if (IS_ERR(phydev)) {
+ if (!phydev) {
printk(KERN_ERR "%s: Could not attach to phy\n", dev->name);
- return PTR_ERR(phydev);
+ return -ENODEV;
}
mac->phydev = phydev;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index b8ead696141..2a179d08720 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -15,7 +15,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter)
do {
/* give atleast 1ms for firmware to respond */
- msleep(1);
+ mdelay(1);
if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT)
return QLCNIC_CDRP_RSP_TIMEOUT;
@@ -601,7 +601,7 @@ void qlcnic_fw_destroy_ctx(struct qlcnic_adapter *adapter)
qlcnic_fw_cmd_destroy_tx_ctx(adapter);
/* Allow dma queues to drain after context reset */
- msleep(20);
+ mdelay(20);
}
}
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index 6d6192316b3..88e3991464e 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -56,6 +56,32 @@ static int smsc_phy_config_init(struct phy_device *phydev)
return smsc_phy_ack_interrupt (phydev);
}
+static int lan87xx_config_init(struct phy_device *phydev)
+{
+ /*
+ * Make sure the EDPWRDOWN bit is NOT set. Setting this bit on
+ * LAN8710/LAN8720 PHY causes the PHY to misbehave, likely due
+ * to a bug on the chip.
+ *
+ * When the system is powered on with the network cable being
+ * disconnected all the way until after ifconfig ethX up is
+ * issued for the LAN port with this PHY, connecting the cable
+ * afterwards does not cause LINK change detection, while the
+ * expected behavior is the Link UP being detected.
+ */
+ int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
+ if (rc < 0)
+ return rc;
+
+ rc &= ~MII_LAN83C185_EDPWRDOWN;
+
+ rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, rc);
+ if (rc < 0)
+ return rc;
+
+ return smsc_phy_ack_interrupt(phydev);
+}
+
static int lan911x_config_init(struct phy_device *phydev)
{
return smsc_phy_ack_interrupt(phydev);
@@ -162,7 +188,7 @@ static struct phy_driver smsc_phy_driver[] = {
/* basic functions */
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
- .config_init = smsc_phy_config_init,
+ .config_init = lan87xx_config_init,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c
index 3ffe8a6e3c8..f8cd61f449a 100644
--- a/drivers/net/team/team.c
+++ b/drivers/net/team/team.c
@@ -1653,8 +1653,8 @@ static int team_nl_cmd_noop(struct sk_buff *skb, struct genl_info *info)
hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq,
&team_nl_family, 0, TEAM_CMD_NOOP);
- if (IS_ERR(hdr)) {
- err = PTR_ERR(hdr);
+ if (!hdr) {
+ err = -EMSGSIZE;
goto err_msg_put;
}
@@ -1848,8 +1848,8 @@ start_again:
hdr = genlmsg_put(skb, pid, seq, &team_nl_family, flags | NLM_F_MULTI,
TEAM_CMD_OPTIONS_GET);
- if (IS_ERR(hdr))
- return PTR_ERR(hdr);
+ if (!hdr)
+ return -EMSGSIZE;
if (nla_put_u32(skb, TEAM_ATTR_TEAM_IFINDEX, team->dev->ifindex))
goto nla_put_failure;
@@ -2068,8 +2068,8 @@ static int team_nl_fill_port_list_get(struct sk_buff *skb,
hdr = genlmsg_put(skb, pid, seq, &team_nl_family, flags,
TEAM_CMD_PORT_LIST_GET);
- if (IS_ERR(hdr))
- return PTR_ERR(hdr);
+ if (!hdr)
+ return -EMSGSIZE;
if (nla_put_u32(skb, TEAM_ATTR_TEAM_IFINDEX, team->dev->ifindex))
goto nla_put_failure;
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index f5ab6e613ec..376143e8a1a 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -1253,6 +1253,7 @@ static struct usb_driver smsc75xx_driver = {
.probe = usbnet_probe,
.suspend = usbnet_suspend,
.resume = usbnet_resume,
+ .reset_resume = usbnet_resume,
.disconnect = usbnet_disconnect,
.disable_hub_initiated_lpm = 1,
};