aboutsummaryrefslogtreecommitdiff
path: root/drivers/mfd/ab8500-gpadc.c
diff options
context:
space:
mode:
authorLee Jones <lee.jones@linaro.org>2013-02-11 10:49:41 +0000
committerLee Jones <lee.jones@linaro.org>2013-03-07 12:28:35 +0800
commit7c8f023616f89c3796331cece68b7efdc5a0b1ca (patch)
tree4c165cfb443660beb1f9e333ee22e17bddd34d51 /drivers/mfd/ab8500-gpadc.c
parentbc6b4132bcae4b8e59766ba2dae8f377009b26d0 (diff)
downloadlinux-7c8f023616f89c3796331cece68b7efdc5a0b1ca.tar.gz
mfd: ab8500-gpadc: Optimise GPADC driver
Optimise GPADC driver: * for code readability and maintenance by grouping similar cheking * for performance by grouping several writing to control register Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/mfd/ab8500-gpadc.c')
-rw-r--r--drivers/mfd/ab8500-gpadc.c212
1 files changed, 55 insertions, 157 deletions
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index e3535c74d5f..af1db2a45e8 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -360,7 +360,12 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
{
int ret;
int looplimit = 0;
+ unsigned long completion_timeout;
u8 val, low_data, high_data, low_data2, high_data2;
+ u8 val_reg1 = 0;
+ unsigned int delay_min = 0;
+ unsigned int delay_max = 0;
+ u8 data_low_addr, data_high_addr;
if (!gpadc)
return -ENODEV;
@@ -392,12 +397,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
}
/* Enable GPADC */
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG, EN_GPADC, EN_GPADC);
- if (ret < 0) {
- dev_err(gpadc->dev, "gpadc_conversion: enable gpadc failed\n");
- goto out;
- }
+ val_reg1 |= EN_GPADC;
/* Select the channel source and set average samples */
switch (avg_sample) {
@@ -415,9 +415,13 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
break;
}
- if (conv_type == ADC_HW)
+ if (conv_type == ADC_HW) {
ret = abx500_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_CTRL3_REG, val);
+ val_reg1 |= EN_TRIG_EDGE;
+ if (trig_edge)
+ val_reg1 |= EN_FALLING;
+ }
else
ret = abx500_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
@@ -432,123 +436,42 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
* charging current sense if it needed, ABB 3.0 needs some special
* treatment too.
*/
- if ((conv_type == ADC_HW) && (trig_edge)) {
- ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_FALLING, EN_FALLING);
- }
-
switch (channel) {
case MAIN_CHARGER_C:
case USB_CHARGER_C:
- if (conv_type == ADC_HW)
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | EN_ICHAR | EN_TRIG_EDGE,
- EN_BUF | EN_ICHAR | EN_TRIG_EDGE);
- else
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | EN_ICHAR,
- EN_BUF | EN_ICHAR);
- break;
-
- case XTAL_TEMP:
- if (conv_type == ADC_HW)
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | EN_TRIG_EDGE,
- EN_BUF | EN_TRIG_EDGE);
- else
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF ,
- EN_BUF);
- break;
-
- case VBAT_TRUE_MEAS:
- if (conv_type == ADC_HW)
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | EN_TRIG_EDGE,
- EN_BUF | EN_TRIG_EDGE);
- else
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF ,
- EN_BUF);
- break;
-
- case BAT_CTRL_AND_IBAT:
- case VBAT_MEAS_AND_IBAT:
- case VBAT_TRUE_MEAS_AND_IBAT:
- case BAT_TEMP_AND_IBAT:
- if (conv_type == ADC_HW)
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_TRIG_EDGE,
- EN_TRIG_EDGE);
- else
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF,
- 0);
+ val_reg1 |= EN_BUF | EN_ICHAR;
break;
-
case BTEMP_BALL:
if (!is_ab8500_2p0_or_earlier(gpadc->parent)) {
- if (conv_type == ADC_HW)
- /* Turn on btemp pull-up on ABB 3.0 */
- ret = abx500_mask_and_set_register_interruptible
- (gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | BTEMP_PULL_UP | EN_TRIG_EDGE,
- EN_BUF | BTEMP_PULL_UP | EN_TRIG_EDGE);
- else
- ret = abx500_mask_and_set_register_interruptible
- (gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | BTEMP_PULL_UP,
- EN_BUF | BTEMP_PULL_UP);
-
- /*
- * Delay might be needed for ABB8500 cut 3.0, if not, remove
- * when hardware will be available
- */
- usleep_range(1000, 1000);
+ val_reg1 |= EN_BUF | BTEMP_PULL_UP;
+ /*
+ * Delay might be needed for ABB8500 cut 3.0, if not,
+ * remove when hardware will be availible
+ */
+ delay_min = 1000; /* Delay in micro seconds */
+ delay_max = 10000; /* large range to optimise sleep mode */
break;
}
/* Intentional fallthrough */
default:
- if (conv_type == ADC_HW)
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
- EN_BUF | EN_TRIG_EDGE,
- EN_BUF | EN_TRIG_EDGE);
- else
- ret = abx500_mask_and_set_register_interruptible(
- gpadc->dev,
- AB8500_GPADC,
- AB8500_GPADC_CTRL1_REG, EN_BUF, EN_BUF);
+ val_reg1 |= EN_BUF;
break;
}
+
+ /* Write configuration to register */
+ ret = abx500_set_register_interruptible(gpadc->dev,
+ AB8500_GPADC, AB8500_GPADC_CTRL1_REG, val_reg1);
if (ret < 0) {
dev_err(gpadc->dev,
- "gpadc_conversion: select falling edge failed\n");
+ "gpadc_conversion: set Control register failed\n");
goto out;
}
- /* Set trigger delay timer */
+ if (delay_min != 0)
+ usleep_range(delay_min, delay_max);
+
if (conv_type == ADC_HW) {
+ /* Set trigger delay timer */
ret = abx500_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_AUTO_TIMER_REG, trig_timer);
if (ret < 0) {
@@ -556,10 +479,11 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
"gpadc_conversion: trig timer failed\n");
goto out;
}
- }
-
- /* Start SW conversion */
- if (conv_type == ADC_SW) {
+ completion_timeout = 2 * HZ;
+ data_low_addr = AB8500_GPADC_AUTODATAL_REG;
+ data_high_addr = AB8500_GPADC_AUTODATAH_REG;
+ } else {
+ /* Start SW conversion */
ret = abx500_mask_and_set_register_interruptible(gpadc->dev,
AB8500_GPADC, AB8500_GPADC_CTRL1_REG,
ADC_SW_CONV, ADC_SW_CONV);
@@ -568,61 +492,35 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
"gpadc_conversion: start s/w conv failed\n");
goto out;
}
+ completion_timeout = msecs_to_jiffies(CONVERSION_TIME);
+ data_low_addr = AB8500_GPADC_MANDATAL_REG;
+ data_high_addr = AB8500_GPADC_MANDATAH_REG;
}
/* wait for completion of conversion */
- if (conv_type == ADC_HW) {
- if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
- 2 * HZ)) {
- dev_err(gpadc->dev,
- "timeout didn't receive hw GPADC conv interrupt\n");
- ret = -EINVAL;
- goto out;
- }
- } else {
- if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
- msecs_to_jiffies(CONVERSION_TIME))) {
- dev_err(gpadc->dev,
- "timeout didn't receive sw GPADC conv interrupt\n");
- ret = -EINVAL;
- goto out;
- }
+ if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete,
+ completion_timeout)) {
+ dev_err(gpadc->dev,
+ "timeout didn't receive GPADC conv interrupt\n");
+ ret = -EINVAL;
+ goto out;
}
/* Read the converted RAW data */
- if (conv_type == ADC_HW) {
- ret = abx500_get_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_AUTODATAL_REG, &low_data);
- if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: read hw low data failed\n");
- goto out;
- }
-
- ret = abx500_get_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_AUTODATAH_REG, &high_data);
- if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: read hw high data failed\n");
- goto out;
- }
- } else {
- ret = abx500_get_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_MANDATAL_REG, &low_data);
- if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: read sw low data failed\n");
- goto out;
- }
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, data_low_addr, &low_data);
+ if (ret < 0) {
+ dev_err(gpadc->dev, "gpadc_conversion: read low data failed\n");
+ goto out;
+ }
- ret = abx500_get_register_interruptible(gpadc->dev,
- AB8500_GPADC, AB8500_GPADC_MANDATAH_REG, &high_data);
- if (ret < 0) {
- dev_err(gpadc->dev,
- "gpadc_conversion: read sw high data failed\n");
- goto out;
- }
+ ret = abx500_get_register_interruptible(gpadc->dev,
+ AB8500_GPADC, data_high_addr, &high_data);
+ if (ret < 0) {
+ dev_err(gpadc->dev, "gpadc_conversion: read high data failed\n");
+ goto out;
}
+
/* Check if double convertion is required */
if ((channel == BAT_CTRL_AND_IBAT) ||
(channel == VBAT_MEAS_AND_IBAT) ||