aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/netlogic
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-06-09 18:10:34 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-06-09 18:10:34 -0700
commit82abb273d838318424644d8f02825db0fbbd400a (patch)
treee1ea8a92db4ba68f347249986ffe3a25ffbf8219 /arch/mips/netlogic
parent9b651cc2277b5e4883012ebab0fea2bcda4cbafa (diff)
parentf8647b506d7116a1a3accd8d618184096e85f50b (diff)
downloadlinux-82abb273d838318424644d8f02825db0fbbd400a.tar.gz
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle: - three fixes for 3.15 that didn't make it in time - limited Octeon 3 support. - paravirtualization support - improvment to platform support for Netlogix SOCs. - add support for powering down the Malta eval board in software - add many instructions to the in-kernel microassembler. - add support for the BPF JIT. - minor cleanups of the BCM47xx code. - large cleanup of math emu code resulting in significant code size reduction, better readability of the code and more accurate emulation. - improvments to the MIPS CPS code. - support C3 power status for the R4k count/compare clock device. - improvments to the GIO support for older SGI workstations. - increase number of supported CPUs to 256; this can be reached on certain embedded multithreaded ccNUMA configurations. - various small cleanups, updates and fixes * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits) MIPS: IP22/IP28: Improve GIO support MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX DEC: Document the R4k MB ASIC mini interrupt controller DEC: Add self as the maintainer MIPS: Add microMIPS MSA support. MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents. MIPS: Replace obsolete strict_strto call with kstrto MIPS: BFP: Simplify code slightly. MIPS: Call find_vma with the mmap_sem held MIPS: Fix 'write_msa_##' inline macro. MIPS: Fix MSA toolchain support detection. mips: Update the email address of Geert Uytterhoeven MIPS: Add minimal defconfig for mips_paravirt MIPS: Enable build for new system 'paravirt' MIPS: paravirt: Add pci controller for virtio MIPS: Add code for new system 'paravirt' MIPS: Add functions for hypervisor call MIPS: OCTEON: Add OCTEON3 to __get_cpu_type MIPS: Add function get_ebase_cpunum MIPS: Add minimal support for OCTEON3 to c-r4k.c ...
Diffstat (limited to 'arch/mips/netlogic')
-rw-r--r--arch/mips/netlogic/common/irq.c2
-rw-r--r--arch/mips/netlogic/common/reset.S39
-rw-r--r--arch/mips/netlogic/common/smp.c12
-rw-r--r--arch/mips/netlogic/common/smpboot.S12
-rw-r--r--arch/mips/netlogic/common/time.c5
-rw-r--r--arch/mips/netlogic/dts/xlp_gvp.dts5
-rw-r--r--arch/mips/netlogic/xlp/Makefile2
-rw-r--r--arch/mips/netlogic/xlp/ahci-init-xlp2.c377
-rw-r--r--arch/mips/netlogic/xlp/ahci-init.c209
-rw-r--r--arch/mips/netlogic/xlp/dt.c3
-rw-r--r--arch/mips/netlogic/xlp/nlm_hal.c283
-rw-r--r--arch/mips/netlogic/xlp/setup.c3
-rw-r--r--arch/mips/netlogic/xlp/wakeup.c16
13 files changed, 857 insertions, 111 deletions
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index 5afc4b7fce0..c100b9afa0a 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -203,6 +203,8 @@ void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *))
xirq = nlm_irq_to_xirq(node, irq);
pic_data = irq_get_handler_data(xirq);
+ if (WARN_ON(!pic_data))
+ return;
pic_data->extra_ack = xack;
}
diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S
index b231fe1e7a0..701c4bcb9e4 100644
--- a/arch/mips/netlogic/common/reset.S
+++ b/arch/mips/netlogic/common/reset.S
@@ -35,6 +35,7 @@
#include <asm/asm.h>
#include <asm/asm-offsets.h>
+#include <asm/cpu.h>
#include <asm/cacheops.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
@@ -74,13 +75,25 @@
.endm
/*
+ * Allow access to physical mem >64G by enabling ELPA in PAGEGRAIN
+ * register. This is needed before going to C code since the SP can
+ * in this region. Called from all HW threads.
+ */
+.macro xlp_early_mmu_init
+ mfc0 t0, CP0_PAGEMASK, 1
+ li t1, (1 << 29) /* ELPA bit */
+ or t0, t1
+ mtc0 t0, CP0_PAGEMASK, 1
+.endm
+
+/*
* L1D cache has to be flushed before enabling threads in XLP.
* On XLP8xx/XLP3xx, we do a low level flush using processor control
* registers. On XLPII CPUs, usual cache instructions work.
*/
.macro xlp_flush_l1_dcache
mfc0 t0, CP0_EBASE, 0
- andi t0, t0, 0xff00
+ andi t0, t0, PRID_IMP_MASK
slt t1, t0, 0x1200
beqz t1, 15f
nop
@@ -159,11 +172,15 @@ FEXPORT(nlm_reset_entry)
1: /* Entry point on core wakeup */
mfc0 t0, CP0_EBASE, 0 /* processor ID */
- andi t0, 0xff00
+ andi t0, PRID_IMP_MASK
li t1, 0x1500 /* XLP 9xx */
beq t0, t1, 2f /* does not need to set coherent */
nop
+ li t1, 0x1300 /* XLP 5xx */
+ beq t0, t1, 2f /* does not need to set coherent */
+ nop
+
/* set bit in SYS coherent register for the core */
mfc0 t0, CP0_EBASE, 1
mfc0 t1, CP0_EBASE, 1
@@ -197,6 +214,9 @@ FEXPORT(nlm_reset_entry)
EXPORT(nlm_boot_siblings)
/* core L1D flush before enable threads */
xlp_flush_l1_dcache
+ /* save ra and sp, will be used later (only for boot cpu) */
+ dmtc0 ra, $22, 6
+ dmtc0 sp, $22, 7
/* Enable hw threads by writing to MAP_THREADMODE of the core */
li t0, CKSEG1ADDR(RESET_DATA_PHYS)
lw t1, BOOT_THREAD_MODE(t0) /* t1 <- thread mode */
@@ -225,6 +245,8 @@ EXPORT(nlm_boot_siblings)
#endif
mtc0 t1, CP0_STATUS
+ xlp_early_mmu_init
+
/* mark CPU ready */
li t3, CKSEG1ADDR(RESET_DATA_PHYS)
ADDIU t1, t3, BOOT_CPU_READY
@@ -238,14 +260,12 @@ EXPORT(nlm_boot_siblings)
nop
/*
- * For the boot CPU, we have to restore registers and
- * return
+ * For the boot CPU, we have to restore ra and sp and return, rest
+ * of the registers will be restored by the caller
*/
-4: dmfc0 t0, $4, 2 /* restore SP from UserLocal */
- li t1, 0xfadebeef
- dmtc0 t1, $4, 2 /* restore SP from UserLocal */
- PTR_SUBU sp, t0, PT_SIZE
- RESTORE_ALL
+4:
+ dmfc0 ra, $22, 6
+ dmfc0 sp, $22, 7
jr ra
nop
EXPORT(nlm_reset_entry_end)
@@ -253,6 +273,7 @@ EXPORT(nlm_reset_entry_end)
LEAF(nlm_init_boot_cpu)
#ifdef CONFIG_CPU_XLP
xlp_config_lsu
+ xlp_early_mmu_init
#endif
jr ra
nop
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
index 6baae15cc7b..4fde7ac76cc 100644
--- a/arch/mips/netlogic/common/smp.c
+++ b/arch/mips/netlogic/common/smp.c
@@ -135,10 +135,6 @@ void nlm_smp_finish(void)
local_irq_enable();
}
-void nlm_cpus_done(void)
-{
-}
-
/*
* Boot all other cpus in the system, initialize them, and bring them into
* the boot function
@@ -198,7 +194,7 @@ void __init nlm_smp_setup(void)
cpumask_scnprintf(buf, ARRAY_SIZE(buf), cpu_possible_mask);
pr_info("Possible CPU mask: %s\n", buf);
- /* check with the cores we have worken up */
+ /* check with the cores we have woken up */
for (ncore = 0, i = 0; i < NLM_NR_NODES; i++)
ncore += hweight32(nlm_get_node(i)->coremask);
@@ -213,6 +209,7 @@ static int nlm_parse_cpumask(cpumask_t *wakeup_mask)
{
uint32_t core0_thr_mask, core_thr_mask;
int threadmode, i, j;
+ char buf[64];
core0_thr_mask = 0;
for (i = 0; i < NLM_THREADS_PER_CORE; i++)
@@ -247,8 +244,8 @@ static int nlm_parse_cpumask(cpumask_t *wakeup_mask)
return threadmode;
unsupp:
- panic("Unsupported CPU mask %lx",
- (unsigned long)cpumask_bits(wakeup_mask)[0]);
+ cpumask_scnprintf(buf, ARRAY_SIZE(buf), wakeup_mask);
+ panic("Unsupported CPU mask %s", buf);
return 0;
}
@@ -277,7 +274,6 @@ struct plat_smp_ops nlm_smp_ops = {
.send_ipi_mask = nlm_send_ipi_mask,
.init_secondary = nlm_init_secondary,
.smp_finish = nlm_smp_finish,
- .cpus_done = nlm_cpus_done,
.boot_secondary = nlm_boot_secondary,
.smp_setup = nlm_smp_setup,
.prepare_cpus = nlm_prepare_cpus,
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index 8597657c27f..805355b0bd0 100644
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -54,8 +54,9 @@
.set noat
.set arch=xlr /* for mfcr/mtcr, XLR is sufficient */
-FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
- dmtc0 sp, $4, 2 /* SP saved in UserLocal */
+/* Called by the boot cpu to wake up its sibling threads */
+NESTED(xlp_boot_core0_siblings, PT_SIZE, sp)
+ /* CPU register contents lost when enabling threads, save them first */
SAVE_ALL
sync
/* find the location to which nlm_boot_siblings was relocated */
@@ -65,9 +66,12 @@ FEXPORT(xlp_boot_core0_siblings) /* "Master" cpu starts from here */
dsubu t2, t1
daddu t2, t0
/* call it */
- jr t2
+ jalr t2
nop
- /* not reached */
+ RESTORE_ALL
+ jr ra
+ nop
+END(xlp_boot_core0_siblings)
NESTED(nlm_boot_secondary_cpus, 16, sp)
/* Initialize CP0 Status */
diff --git a/arch/mips/netlogic/common/time.c b/arch/mips/netlogic/common/time.c
index 13391b8a603..0c0a1a606f7 100644
--- a/arch/mips/netlogic/common/time.c
+++ b/arch/mips/netlogic/common/time.c
@@ -82,6 +82,7 @@ static struct clocksource csrc_pic = {
static void nlm_init_pic_timer(void)
{
uint64_t picbase = nlm_get_node(0)->picbase;
+ u32 picfreq;
nlm_pic_set_timer(picbase, PIC_CLOCK_TIMER, ~0ULL, 0, 0);
if (current_cpu_data.cputype == CPU_XLR) {
@@ -92,7 +93,9 @@ static void nlm_init_pic_timer(void)
csrc_pic.read = nlm_get_pic_timer;
}
csrc_pic.rating = 1000;
- clocksource_register_hz(&csrc_pic, pic_timer_freq());
+ picfreq = pic_timer_freq();
+ clocksource_register_hz(&csrc_pic, picfreq);
+ pr_info("PIC clock source added, frequency %d\n", picfreq);
}
void __init plat_time_init(void)
diff --git a/arch/mips/netlogic/dts/xlp_gvp.dts b/arch/mips/netlogic/dts/xlp_gvp.dts
index 047d27f5448..bb4ecd1d47f 100644
--- a/arch/mips/netlogic/dts/xlp_gvp.dts
+++ b/arch/mips/netlogic/dts/xlp_gvp.dts
@@ -26,11 +26,12 @@
interrupt-parent = <&pic>;
interrupts = <17>;
};
- pic: pic@4000 {
- interrupt-controller;
+ pic: pic@110000 {
+ compatible = "netlogic,xlp-pic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0 0x110000 0x200>;
+ interrupt-controller;
};
nor_flash@1,0 {
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index ed9a93c0465..be358a8050c 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -2,3 +2,5 @@ obj-y += setup.o nlm_hal.o cop2-ex.o dt.o
obj-$(CONFIG_SMP) += wakeup.o
obj-$(CONFIG_USB) += usb-init.o
obj-$(CONFIG_USB) += usb-init-xlp2.o
+obj-$(CONFIG_SATA_AHCI) += ahci-init.o
+obj-$(CONFIG_SATA_AHCI) += ahci-init-xlp2.o
diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
new file mode 100644
index 00000000000..c83dbf3689e
--- /dev/null
+++ b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
@@ -0,0 +1,377 @@
+/*
+ * Copyright (c) 2003-2014 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/pci_ids.h>
+#include <linux/nodemask.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/mips-extns.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+
+#define SATA_CTL 0x0
+#define SATA_STATUS 0x1 /* Status Reg */
+#define SATA_INT 0x2 /* Interrupt Reg */
+#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */
+#define SATA_BIU_TIMEOUT 0x4
+#define AXIWRSPERRLOG 0x5
+#define AXIRDSPERRLOG 0x6
+#define BiuTimeoutLow 0x7
+#define BiuTimeoutHi 0x8
+#define BiuSlvErLow 0x9
+#define BiuSlvErHi 0xa
+#define IO_CONFIG_SWAP_DIS 0xb
+#define CR_REG_TIMER 0xc
+#define CORE_ID 0xd
+#define AXI_SLAVE_OPT1 0xe
+#define PHY_MEM_ACCESS 0xf
+#define PHY0_CNTRL 0x10
+#define PHY0_STAT 0x11
+#define PHY0_RX_ALIGN 0x12
+#define PHY0_RX_EQ_LO 0x13
+#define PHY0_RX_EQ_HI 0x14
+#define PHY0_BIST_LOOP 0x15
+#define PHY1_CNTRL 0x16
+#define PHY1_STAT 0x17
+#define PHY1_RX_ALIGN 0x18
+#define PHY1_RX_EQ_LO 0x19
+#define PHY1_RX_EQ_HI 0x1a
+#define PHY1_BIST_LOOP 0x1b
+#define RdExBase 0x1c
+#define RdExLimit 0x1d
+#define CacheAllocBase 0x1e
+#define CacheAllocLimit 0x1f
+#define BiuSlaveCmdGstNum 0x20
+
+/*SATA_CTL Bits */
+#define SATA_RST_N BIT(0) /* Active low reset sata_core phy */
+#define SataCtlReserve0 BIT(1)
+#define M_CSYSREQ BIT(2) /* AXI master low power, not used */
+#define S_CSYSREQ BIT(3) /* AXI slave low power, not used */
+#define P0_CP_DET BIT(8) /* Reserved, bring in from pad */
+#define P0_MP_SW BIT(9) /* Mech Switch */
+#define P0_DISABLE BIT(10) /* disable p0 */
+#define P0_ACT_LED_EN BIT(11) /* Active LED enable */
+#define P0_IRST_HARD_SYNTH BIT(12) /* PHY hard synth reset */
+#define P0_IRST_HARD_TXRX BIT(13) /* PHY lane hard reset */
+#define P0_IRST_POR BIT(14) /* PHY power on reset*/
+#define P0_IPDTXL BIT(15) /* PHY Tx lane dis/power down */
+#define P0_IPDRXL BIT(16) /* PHY Rx lane dis/power down */
+#define P0_IPDIPDMSYNTH BIT(17) /* PHY synthesizer dis/porwer down */
+#define P0_CP_POD_EN BIT(18) /* CP_POD enable */
+#define P0_AT_BYPASS BIT(19) /* P0 address translation by pass */
+#define P1_CP_DET BIT(20) /* Reserved,Cold Detect */
+#define P1_MP_SW BIT(21) /* Mech Switch */
+#define P1_DISABLE BIT(22) /* disable p1 */
+#define P1_ACT_LED_EN BIT(23) /* Active LED enable */
+#define P1_IRST_HARD_SYNTH BIT(24) /* PHY hard synth reset */
+#define P1_IRST_HARD_TXRX BIT(25) /* PHY lane hard reset */
+#define P1_IRST_POR BIT(26) /* PHY power on reset*/
+#define P1_IPDTXL BIT(27) /* PHY Tx lane dis/porwer down */
+#define P1_IPDRXL BIT(28) /* PHY Rx lane dis/porwer down */
+#define P1_IPDIPDMSYNTH BIT(29) /* PHY synthesizer dis/porwer down */
+#define P1_CP_POD_EN BIT(30)
+#define P1_AT_BYPASS BIT(31) /* P1 address translation by pass */
+
+/* Status register */
+#define M_CACTIVE BIT(0) /* m_cactive, not used */
+#define S_CACTIVE BIT(1) /* s_cactive, not used */
+#define P0_PHY_READY BIT(8) /* phy is ready */
+#define P0_CP_POD BIT(9) /* Cold PowerOn */
+#define P0_SLUMBER BIT(10) /* power mode slumber */
+#define P0_PATIAL BIT(11) /* power mode patial */
+#define P0_PHY_SIG_DET BIT(12) /* phy dignal detect */
+#define P0_PHY_CALI BIT(13) /* phy calibration done */
+#define P1_PHY_READY BIT(16) /* phy is ready */
+#define P1_CP_POD BIT(17) /* Cold PowerOn */
+#define P1_SLUMBER BIT(18) /* power mode slumber */
+#define P1_PATIAL BIT(19) /* power mode patial */
+#define P1_PHY_SIG_DET BIT(20) /* phy dignal detect */
+#define P1_PHY_CALI BIT(21) /* phy calibration done */
+
+/* SATA CR_REG_TIMER bits */
+#define CR_TIME_SCALE (0x1000 << 0)
+
+/* SATA PHY specific registers start and end address */
+#define RXCDRCALFOSC0 0x0065
+#define CALDUTY 0x006e
+#define RXDPIF 0x8065
+#define PPMDRIFTMAX_HI 0x80A4
+
+#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_sata_pcibase(node) \
+ nlm_pcicfg_base(XLP9XX_IO_SATA_OFFSET(node))
+#define nlm_get_sata_regbase(node) \
+ (nlm_get_sata_pcibase(node) + 0x100)
+
+/* SATA PHY config for register block 1 0x0065 .. 0x006e */
+static const u8 sata_phy_config1[] = {
+ 0xC9, 0xC9, 0x07, 0x07, 0x18, 0x18, 0x01, 0x01, 0x22, 0x00
+};
+
+/* SATA PHY config for register block 2 0x0x8065 .. 0x0x80A4 */
+static const u8 sata_phy_config2[] = {
+ 0xAA, 0x00, 0x4C, 0xC9, 0xC9, 0x07, 0x07, 0x18,
+ 0x18, 0x05, 0x0C, 0x10, 0x00, 0x10, 0x00, 0xFF,
+ 0xCF, 0xF7, 0xE1, 0xF5, 0xFD, 0xFD, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, 0xFD, 0xFD,
+ 0xF5, 0xF5, 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5,
+ 0xFD, 0xFD, 0xF5, 0xF5, 0xFF, 0xFF, 0xFF, 0xF5,
+ 0x3F, 0x00, 0x32, 0x00, 0x03, 0x01, 0x05, 0x05,
+ 0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04,
+};
+
+const int sata_phy_debug = 0; /* set to verify PHY writes */
+
+static void sata_clear_glue_reg(u64 regbase, u32 off, u32 bit)
+{
+ u32 reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
+}
+
+static void sata_set_glue_reg(u64 regbase, u32 off, u32 bit)
+{
+ u32 reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val | bit));
+}
+
+static void write_phy_reg(u64 regbase, u32 addr, u32 physel, u8 data)
+{
+ nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
+ (1u << 31) | (physel << 24) | (data << 16) | addr);
+ udelay(850);
+}
+
+static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel)
+{
+ u32 val;
+
+ nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
+ (0 << 31) | (physel << 24) | (0 << 16) | addr);
+ udelay(850);
+ val = nlm_read_sata_reg(regbase, PHY_MEM_ACCESS);
+ return (val >> 16) & 0xff;
+}
+
+static void config_sata_phy(u64 regbase)
+{
+ u32 port, i, reg;
+
+ for (port = 0; port < 2; port++) {
+ for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
+ write_phy_reg(regbase, reg, port, sata_phy_config1[i]);
+
+ for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
+ write_phy_reg(regbase, reg, port, sata_phy_config2[i]);
+ }
+}
+
+static void check_phy_register(u64 regbase, u32 addr, u32 physel, u8 xdata)
+{
+ u8 data;
+
+ data = read_phy_reg(regbase, addr, physel);
+ pr_info("PHY read addr = 0x%x physel = %d data = 0x%x %s\n",
+ addr, physel, data, data == xdata ? "TRUE" : "FALSE");
+}
+
+static void verify_sata_phy_config(u64 regbase)
+{
+ u32 port, i, reg;
+
+ for (port = 0; port < 2; port++) {
+ for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
+ check_phy_register(regbase, reg, port,
+ sata_phy_config1[i]);
+
+ for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
+ check_phy_register(regbase, reg, port,
+ sata_phy_config2[i]);
+ }
+}
+
+static void nlm_sata_firmware_init(int node)
+{
+ u32 reg_val;
+ u64 regbase;
+ int n;
+
+ pr_info("Initializing XLP9XX On-chip AHCI...\n");
+ regbase = nlm_get_sata_regbase(node);
+
+ /* Reset port0 */
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
+
+ /* port1 */
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
+ sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
+ udelay(300);
+
+ /* Set PHY */
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
+
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
+ udelay(1000);
+
+ /* setup PHY */
+ config_sata_phy(regbase);
+ if (sata_phy_debug)
+ verify_sata_phy_config(regbase);
+
+ udelay(1000);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
+ sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
+ sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
+ udelay(300);
+
+ /* Override reset in serial PHY mode */
+ sata_set_glue_reg(regbase, CR_REG_TIMER, CR_TIME_SCALE);
+ /* Set reset SATA */
+ sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ sata_set_glue_reg(regbase, SATA_CTL, M_CSYSREQ);
+ sata_set_glue_reg(regbase, SATA_CTL, S_CSYSREQ);
+
+ pr_debug("Waiting for PHYs to come up.\n");
+ n = 10000;
+ do {
+ reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
+ if ((reg_val & P1_PHY_READY) && (reg_val & P0_PHY_READY))
+ break;
+ udelay(10);
+ } while (--n > 0);
+
+ if (reg_val & P0_PHY_READY)
+ pr_info("PHY0 is up.\n");
+ else
+ pr_info("PHY0 is down.\n");
+ if (reg_val & P1_PHY_READY)
+ pr_info("PHY1 is up.\n");
+ else
+ pr_info("PHY1 is down.\n");
+
+ pr_info("XLP AHCI Init Done.\n");
+}
+
+static int __init nlm_ahci_init(void)
+{
+ int node;
+
+ if (!cpu_is_xlp9xx())
+ return 0;
+ for (node = 0; node < NLM_NR_NODES; node++)
+ if (nlm_node_present(node))
+ nlm_sata_firmware_init(node);
+ return 0;
+}
+
+static void nlm_sata_intr_ack(struct irq_data *data)
+{
+ u64 regbase;
+ u32 val;
+ int node;
+
+ node = data->irq / NLM_IRQS_PER_NODE;
+ regbase = nlm_get_sata_regbase(node);
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+}
+
+static void nlm_sata_fixup_bar(struct pci_dev *dev)
+{
+ dev->resource[5] = dev->resource[0];
+ memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+}
+
+static void nlm_sata_fixup_final(struct pci_dev *dev)
+{
+ u32 val;
+ u64 regbase;
+ int node;
+
+ /* Find end bridge function to find node */
+ node = xlp_socdev_to_node(dev);
+ regbase = nlm_get_sata_regbase(node);
+
+ /* clear pending interrupts and then enable them */
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+
+ /* Enable only the core interrupt */
+ sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
+
+ dev->irq = nlm_irq_to_xirq(node, PIC_SATA_IRQ);
+ nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
+}
+
+arch_initcall(nlm_ahci_init);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
+ nlm_sata_fixup_bar);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
+ nlm_sata_fixup_final);
diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c
new file mode 100644
index 00000000000..a9d0fae0210
--- /dev/null
+++ b/arch/mips/netlogic/xlp/ahci-init.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2003-2014 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/mips-extns.h>
+
+#define SATA_CTL 0x0
+#define SATA_STATUS 0x1 /* Status Reg */
+#define SATA_INT 0x2 /* Interrupt Reg */
+#define SATA_INT_MASK 0x3 /* Interrupt Mask Reg */
+#define SATA_CR_REG_TIMER 0x4 /* PHY Conrol Timer Reg */
+#define SATA_CORE_ID 0x5 /* Core ID Reg */
+#define SATA_AXI_SLAVE_OPT1 0x6 /* AXI Slave Options Reg */
+#define SATA_PHY_LOS_LEV 0x7 /* PHY LOS Level Reg */
+#define SATA_PHY_MULTI 0x8 /* PHY Multiplier Reg */
+#define SATA_PHY_CLK_SEL 0x9 /* Clock Select Reg */
+#define SATA_PHY_AMP1_GEN1 0xa /* PHY Transmit Amplitude Reg 1 */
+#define SATA_PHY_AMP1_GEN2 0xb /* PHY Transmit Amplitude Reg 2 */
+#define SATA_PHY_AMP1_GEN3 0xc /* PHY Transmit Amplitude Reg 3 */
+#define SATA_PHY_PRE1 0xd /* PHY Transmit Preemphasis Reg 1 */
+#define SATA_PHY_PRE2 0xe /* PHY Transmit Preemphasis Reg 2 */
+#define SATA_PHY_PRE3 0xf /* PHY Transmit Preemphasis Reg 3 */
+#define SATA_SPDMODE 0x10 /* Speed Mode Reg */
+#define SATA_REFCLK 0x11 /* Reference Clock Control Reg */
+#define SATA_BYTE_SWAP_DIS 0x12 /* byte swap disable */
+
+/*SATA_CTL Bits */
+#define SATA_RST_N BIT(0)
+#define PHY0_RESET_N BIT(16)
+#define PHY1_RESET_N BIT(17)
+#define PHY2_RESET_N BIT(18)
+#define PHY3_RESET_N BIT(19)
+#define M_CSYSREQ BIT(2)
+#define S_CSYSREQ BIT(3)
+
+/*SATA_STATUS Bits */
+#define P0_PHY_READY BIT(4)
+#define P1_PHY_READY BIT(5)
+#define P2_PHY_READY BIT(6)
+#define P3_PHY_READY BIT(7)
+
+#define nlm_read_sata_reg(b, r) nlm_read_reg(b, r)
+#define nlm_write_sata_reg(b, r, v) nlm_write_reg(b, r, v)
+#define nlm_get_sata_pcibase(node) \
+ nlm_pcicfg_base(XLP_IO_SATA_OFFSET(node))
+/* SATA device specific configuration registers are starts at 0x900 offset */
+#define nlm_get_sata_regbase(node) \
+ (nlm_get_sata_pcibase(node) + 0x900)
+
+static void sata_clear_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
+{
+ uint32_t reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
+}
+
+static void sata_set_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
+{
+ uint32_t reg_val;
+
+ reg_val = nlm_read_sata_reg(regbase, off);
+ nlm_write_sata_reg(regbase, off, (reg_val | bit));
+}
+
+static void nlm_sata_firmware_init(int node)
+{
+ uint32_t reg_val;
+ uint64_t regbase;
+ int i;
+
+ pr_info("XLP AHCI Initialization started.\n");
+ regbase = nlm_get_sata_regbase(node);
+
+ /* Reset SATA */
+ sata_clear_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ /* Reset PHY */
+ sata_clear_glue_reg(regbase, SATA_CTL,
+ (PHY3_RESET_N | PHY2_RESET_N
+ | PHY1_RESET_N | PHY0_RESET_N));
+
+ /* Set SATA */
+ sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+ /* Set PHY */
+ sata_set_glue_reg(regbase, SATA_CTL,
+ (PHY3_RESET_N | PHY2_RESET_N
+ | PHY1_RESET_N | PHY0_RESET_N));
+
+ pr_debug("Waiting for PHYs to come up.\n");
+ i = 0;
+ do {
+ reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
+ i++;
+ } while (((reg_val & 0xF0) != 0xF0) && (i < 10000));
+
+ for (i = 0; i < 4; i++) {
+ if (reg_val & (P0_PHY_READY << i))
+ pr_info("PHY%d is up.\n", i);
+ else
+ pr_info("PHY%d is down.\n", i);
+ }
+
+ pr_info("XLP AHCI init done.\n");
+}
+
+static int __init nlm_ahci_init(void)
+{
+ int node = 0;
+ int chip = read_c0_prid() & PRID_REV_MASK;
+
+ if (chip == PRID_IMP_NETLOGIC_XLP3XX)
+ nlm_sata_firmware_init(node);
+ return 0;
+}
+
+static void nlm_sata_intr_ack(struct irq_data *data)
+{
+ uint32_t val = 0;
+ uint64_t regbase;
+
+ regbase = nlm_get_sata_regbase(nlm_nodeid());
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+}
+
+static void nlm_sata_fixup_bar(struct pci_dev *dev)
+{
+ /*
+ * The AHCI resource is in BAR 0, move it to
+ * BAR 5, where it is expected
+ */
+ dev->resource[5] = dev->resource[0];
+ memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+}
+
+static void nlm_sata_fixup_final(struct pci_dev *dev)
+{
+ uint32_t val;
+ uint64_t regbase;
+ int node = 0; /* XLP3XX does not support multi-node */
+
+ regbase = nlm_get_sata_regbase(node);
+
+ /* clear pending interrupts and then enable them */
+ val = nlm_read_sata_reg(regbase, SATA_INT);
+ sata_set_glue_reg(regbase, SATA_INT, val);
+
+ /* Mask the core interrupt. If all the interrupts
+ * are enabled there are spurious interrupt flow
+ * happening, to avoid only enable core interrupt
+ * mask.
+ */
+ sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
+
+ dev->irq = PIC_SATA_IRQ;
+ nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
+}
+
+arch_initcall(nlm_ahci_init);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
+ nlm_sata_fixup_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
+ nlm_sata_fixup_final);
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index bdde33147bc..7cc46032b28 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -48,9 +48,10 @@ static void *xlp_fdt_blob;
void __init *xlp_dt_init(void *fdtp)
{
if (!fdtp) {
- switch (current_cpu_data.processor_id & 0xff00) {
+ switch (current_cpu_data.processor_id & PRID_IMP_MASK) {
#ifdef CONFIG_DT_XLP_GVP
case PRID_IMP_NETLOGIC_XLP9XX:
+ case PRID_IMP_NETLOGIC_XLP5XX:
fdtp = __dtb_xlp_gvp_begin;
break;
#endif
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 997cd9ee10d..bc24beb3a42 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -54,6 +54,8 @@ void nlm_node_init(int node)
struct nlm_soc_info *nodep;
nodep = nlm_get_node(node);
+ if (node == 0)
+ nodep->coremask = 1; /* node 0, boot cpu */
nodep->sysbase = nlm_get_sys_regbase(node);
nodep->picbase = nlm_get_pic_regbase(node);
nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
@@ -64,31 +66,39 @@ void nlm_node_init(int node)
spin_lock_init(&nodep->piclock);
}
-int nlm_irq_to_irt(int irq)
+static int xlp9xx_irq_to_irt(int irq)
+{
+ switch (irq) {
+ case PIC_GPIO_IRQ:
+ return 12;
+ case PIC_9XX_XHCI_0_IRQ:
+ return 114;
+ case PIC_9XX_XHCI_1_IRQ:
+ return 115;
+ case PIC_UART_0_IRQ:
+ return 133;
+ case PIC_UART_1_IRQ:
+ return 134;
+ case PIC_SATA_IRQ:
+ return 143;
+ case PIC_SPI_IRQ:
+ return 152;
+ case PIC_MMC_IRQ:
+ return 153;
+ case PIC_PCIE_LINK_LEGACY_IRQ(0):
+ case PIC_PCIE_LINK_LEGACY_IRQ(1):
+ case PIC_PCIE_LINK_LEGACY_IRQ(2):
+ case PIC_PCIE_LINK_LEGACY_IRQ(3):
+ return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE;
+ }
+ return -1;
+}
+
+static int xlp_irq_to_irt(int irq)
{
uint64_t pcibase;
int devoff, irt;
- /* bypass for 9xx */
- if (cpu_is_xlp9xx()) {
- switch (irq) {
- case PIC_9XX_XHCI_0_IRQ:
- return 114;
- case PIC_9XX_XHCI_1_IRQ:
- return 115;
- case PIC_UART_0_IRQ:
- return 133;
- case PIC_UART_1_IRQ:
- return 134;
- case PIC_PCIE_LINK_LEGACY_IRQ(0):
- case PIC_PCIE_LINK_LEGACY_IRQ(1):
- case PIC_PCIE_LINK_LEGACY_IRQ(2):
- case PIC_PCIE_LINK_LEGACY_IRQ(3):
- return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE;
- }
- return -1;
- }
-
devoff = 0;
switch (irq) {
case PIC_UART_0_IRQ:
@@ -98,7 +108,7 @@ int nlm_irq_to_irt(int irq)
devoff = XLP_IO_UART1_OFFSET(0);
break;
case PIC_MMC_IRQ:
- devoff = XLP_IO_SD_OFFSET(0);
+ devoff = XLP_IO_MMC_OFFSET(0);
break;
case PIC_I2C_0_IRQ: /* I2C will be fixed up */
case PIC_I2C_1_IRQ:
@@ -109,6 +119,18 @@ int nlm_irq_to_irt(int irq)
else
devoff = XLP_IO_I2C0_OFFSET(0);
break;
+ case PIC_SATA_IRQ:
+ devoff = XLP_IO_SATA_OFFSET(0);
+ break;
+ case PIC_GPIO_IRQ:
+ devoff = XLP_IO_GPIO_OFFSET(0);
+ break;
+ case PIC_NAND_IRQ:
+ devoff = XLP_IO_NAND_OFFSET(0);
+ break;
+ case PIC_SPI_IRQ:
+ devoff = XLP_IO_SPI_OFFSET(0);
+ break;
default:
if (cpu_is_xlpii()) {
switch (irq) {
@@ -164,61 +186,123 @@ int nlm_irq_to_irt(int irq)
/* HW bug, PCI IRT entries are bad on early silicon, fix */
irt = PIC_IRT_PCIE_LINK_INDEX(irq -
PIC_PCIE_LINK_LEGACY_IRQ_BASE);
- } else if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) &&
- irq <= PIC_PCIE_LINK_MSI_IRQ(3)) {
- irt = -2;
- } else if (irq >= PIC_PCIE_MSIX_IRQ(0) &&
- irq <= PIC_PCIE_MSIX_IRQ(3)) {
- irt = -2;
} else {
irt = -1;
}
return irt;
}
-unsigned int nlm_get_core_frequency(int node, int core)
+int nlm_irq_to_irt(int irq)
{
- unsigned int pll_divf, pll_divr, dfs_div, ext_div;
- unsigned int rstval, dfsval, denom;
- uint64_t num, sysbase;
+ /* return -2 for irqs without 1-1 mapping */
+ if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) && irq <= PIC_PCIE_LINK_MSI_IRQ(3))
+ return -2;
+ if (irq >= PIC_PCIE_MSIX_IRQ(0) && irq <= PIC_PCIE_MSIX_IRQ(3))
+ return -2;
- sysbase = nlm_get_node(node)->sysbase;
if (cpu_is_xlp9xx())
- rstval = nlm_read_sys_reg(sysbase, SYS_9XX_POWER_ON_RESET_CFG);
+ return xlp9xx_irq_to_irt(irq);
else
- rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
- if (cpu_is_xlpii()) {
- num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26));
- denom = 3;
+ return xlp_irq_to_irt(irq);
+}
+
+static unsigned int nlm_xlp2_get_core_frequency(int node, int core)
+{
+ unsigned int pll_post_div, ctrl_val0, ctrl_val1, denom;
+ uint64_t num, sysbase, clockbase;
+
+ if (cpu_is_xlp9xx()) {
+ clockbase = nlm_get_clock_regbase(node);
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_CPU_PLL_CTRL0(core));
+ ctrl_val1 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_CPU_PLL_CTRL1(core));
} else {
- dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
- pll_divf = ((rstval >> 10) & 0x7f) + 1;
- pll_divr = ((rstval >> 8) & 0x3) + 1;
- ext_div = ((rstval >> 30) & 0x3) + 1;
- dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1;
-
- num = 800000000ULL * pll_divf;
- denom = 3 * pll_divr * ext_div * dfs_div;
+ sysbase = nlm_get_node(node)->sysbase;
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_CPU_PLL_CTRL0(core));
+ ctrl_val1 = nlm_read_sys_reg(sysbase,
+ SYS_CPU_PLL_CTRL1(core));
+ }
+
+ /* Find PLL post divider value */
+ switch ((ctrl_val0 >> 24) & 0x7) {
+ case 1:
+ pll_post_div = 2;
+ break;
+ case 3:
+ pll_post_div = 4;
+ break;
+ case 7:
+ pll_post_div = 8;
+ break;
+ case 6:
+ pll_post_div = 16;
+ break;
+ case 0:
+ default:
+ pll_post_div = 1;
+ break;
}
+
+ num = 1000000ULL * (400 * 3 + 100 * (ctrl_val1 & 0x3f));
+ denom = 3 * pll_post_div;
do_div(num, denom);
+
return (unsigned int)num;
}
-/* Calculate Frequency to the PIC from PLL.
- * freq_out = ( ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13 ) /
- * ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
+static unsigned int nlm_xlp_get_core_frequency(int node, int core)
+{
+ unsigned int pll_divf, pll_divr, dfs_div, ext_div;
+ unsigned int rstval, dfsval, denom;
+ uint64_t num, sysbase;
+
+ sysbase = nlm_get_node(node)->sysbase;
+ rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
+ dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
+ pll_divf = ((rstval >> 10) & 0x7f) + 1;
+ pll_divr = ((rstval >> 8) & 0x3) + 1;
+ ext_div = ((rstval >> 30) & 0x3) + 1;
+ dfs_div = ((dfsval >> (core * 4)) & 0xf) + 1;
+
+ num = 800000000ULL * pll_divf;
+ denom = 3 * pll_divr * ext_div * dfs_div;
+ do_div(num, denom);
+
+ return (unsigned int)num;
+}
+
+unsigned int nlm_get_core_frequency(int node, int core)
+{
+ if (cpu_is_xlpii())
+ return nlm_xlp2_get_core_frequency(node, core);
+ else
+ return nlm_xlp_get_core_frequency(node, core);
+}
+
+/*
+ * Calculate PIC frequency from PLL registers.
+ * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) /
+ * ((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
*/
-static unsigned int nlm_2xx_get_pic_frequency(int node)
+static unsigned int nlm_xlp2_get_pic_frequency(int node)
{
- u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div;
+ u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx;
u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
- u64 ref_clk, sysbase, pll_out_freq_num, ref_clk_select;
+ u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk;
sysbase = nlm_get_node(node)->sysbase;
+ clockbase = nlm_get_clock_regbase(node);
+ cpu_xlp9xx = cpu_is_xlp9xx();
/* Find ref_clk_base */
- ref_clk_select =
- (nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
+ if (cpu_xlp9xx)
+ ref_clk_select = (nlm_read_sys_reg(sysbase,
+ SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3;
+ else
+ ref_clk_select = (nlm_read_sys_reg(sysbase,
+ SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
switch (ref_clk_select) {
case 0:
ref_clk = 200000000ULL;
@@ -239,30 +323,70 @@ static unsigned int nlm_2xx_get_pic_frequency(int node)
}
/* Find the clock source PLL device for PIC */
- reg_select = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_SEL) >> 22) & 0x3;
- switch (reg_select) {
- case 0:
- ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0);
- ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2);
- break;
- case 1:
- ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(0));
- ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(0));
- break;
- case 2:
- ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(1));
- ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(1));
- break;
- case 3:
- ctrl_val0 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL0_DEVX(2));
- ctrl_val2 = nlm_read_sys_reg(sysbase, SYS_PLL_CTRL2_DEVX(2));
- break;
+ if (cpu_xlp9xx) {
+ reg_select = nlm_read_sys_reg(clockbase,
+ SYS_9XX_CLK_DEV_SEL) & 0x3;
+ switch (reg_select) {
+ case 0:
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL0);
+ ctrl_val2 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL2);
+ break;
+ case 1:
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL0_DEVX(0));
+ ctrl_val2 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL2_DEVX(0));
+ break;
+ case 2:
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL0_DEVX(1));
+ ctrl_val2 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL2_DEVX(1));
+ break;
+ case 3:
+ ctrl_val0 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL0_DEVX(2));
+ ctrl_val2 = nlm_read_sys_reg(clockbase,
+ SYS_9XX_PLL_CTRL2_DEVX(2));
+ break;
+ }
+ } else {
+ reg_select = (nlm_read_sys_reg(sysbase,
+ SYS_CLK_DEV_SEL) >> 22) & 0x3;
+ switch (reg_select) {
+ case 0:
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL0);
+ ctrl_val2 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL2);
+ break;
+ case 1:
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL0_DEVX(0));
+ ctrl_val2 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL2_DEVX(0));
+ break;
+ case 2:
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL0_DEVX(1));
+ ctrl_val2 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL2_DEVX(1));
+ break;
+ case 3:
+ ctrl_val0 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL0_DEVX(2));
+ ctrl_val2 = nlm_read_sys_reg(sysbase,
+ SYS_PLL_CTRL2_DEVX(2));
+ break;
+ }
}
vco_post_div = (ctrl_val0 >> 5) & 0x7;
pll_post_div = (ctrl_val0 >> 24) & 0x7;
mdiv = ctrl_val2 & 0xff;
- fdiv = (ctrl_val2 >> 8) & 0xfff;
+ fdiv = (ctrl_val2 >> 8) & 0x1fff;
/* Find PLL post divider value */
switch (pll_post_div) {
@@ -292,7 +416,12 @@ static unsigned int nlm_2xx_get_pic_frequency(int node)
do_div(pll_out_freq_num, pll_out_freq_den);
/* PIC post divider, which happens after PLL */
- pic_div = (nlm_read_sys_reg(sysbase, SYS_CLK_DEV_DIV) >> 22) & 0x3;
+ if (cpu_xlp9xx)
+ pic_div = nlm_read_sys_reg(clockbase,
+ SYS_9XX_CLK_DEV_DIV) & 0x3;
+ else
+ pic_div = (nlm_read_sys_reg(sysbase,
+ SYS_CLK_DEV_DIV) >> 22) & 0x3;
do_div(pll_out_freq_num, 1 << pic_div);
return pll_out_freq_num;
@@ -300,12 +429,8 @@ static unsigned int nlm_2xx_get_pic_frequency(int node)
unsigned int nlm_get_pic_frequency(int node)
{
- /* TODO Has to calculate freq as like 2xx */
- if (cpu_is_xlp9xx())
- return 250000000;
-
if (cpu_is_xlpii())
- return nlm_2xx_get_pic_frequency(node);
+ return nlm_xlp2_get_pic_frequency(node);
else
return 133333333;
}
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 8c60a2dd9ef..4fdd9fd29d1 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -121,8 +121,9 @@ void __init plat_mem_setup(void)
const char *get_system_type(void)
{
- switch (read_c0_prid() & 0xff00) {
+ switch (read_c0_prid() & PRID_IMP_MASK) {
case PRID_IMP_NETLOGIC_XLP9XX:
+ case PRID_IMP_NETLOGIC_XLP5XX:
case PRID_IMP_NETLOGIC_XLP2XX:
return "Broadcom XLPII Series";
default:
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
index 9a92617a2af..e5f44d2605a 100644
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -135,11 +135,19 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
if (cpu_is_xlp9xx()) {
fusebase = nlm_get_fuse_regbase(n);
fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6);
- mask = 0xfffff;
+ switch (read_c0_prid() & PRID_IMP_MASK) {
+ case PRID_IMP_NETLOGIC_XLP5XX:
+ mask = 0xff;
+ break;
+ case PRID_IMP_NETLOGIC_XLP9XX:
+ default:
+ mask = 0xfffff;
+ break;
+ }
} else {
fusemask = nlm_read_sys_reg(nodep->sysbase,
SYS_EFUSE_DEVICE_CFG_STATUS0);
- switch (read_c0_prid() & 0xff00) {
+ switch (read_c0_prid() & PRID_IMP_MASK) {
case PRID_IMP_NETLOGIC_XLP3XX:
mask = 0xf;
break;
@@ -159,10 +167,6 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
*/
syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
- /* The boot cpu */
- if (n == 0)
- nodep->coremask = 1;
-
pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
for (core = 0; core < nlm_cores_per_node(); core++) {
/* we will be on node 0 core 0 */