aboutsummaryrefslogtreecommitdiff
path: root/arch/riscv/include
AgeCommit message (Collapse)Author
2018-08-28riscv: tlb: Provide definition of tlb_flush() before including tlb.hWill Deacon
As of commit fd1102f0aade ("mm: mmu_notifier fix for tlb_end_vma"), asm-generic/tlb.h now calls tlb_flush() from a static inline function, so we need to make sure that it's declared before #including the asm-generic header in the arch header. Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: fd1102f0aade ("mm: mmu_notifier fix for tlb_end_vma") Signed-off-by: Will Deacon <will.deacon@arm.com> [groeck: Use forward declaration instead of moving inline function] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-20RISC-V: Fix sys_riscv_flush_icachePalmer Dabbelt
This contains a pair of patches that together fix sys_riscv_flush_icache on all systems: * The first enables sys_riscv_flush_icache() for non-SMP systems. * The second fixes a bug in our syscall header that caused sys_riscv_flush_icache to never get generated.
2018-08-20riscv: Delete asm/compat.hDeepa Dinamani
riscv does not enable CONFIG_COMPAT in default configurations: defconfig, allmodconfig and allnoconfig. Remove the asm/compat.h as it does not seem to add any value to the architecture without CONFIG_COMPAT. Now that time compat syscalls are being reused in non CONFIG_COMPAT modes, asm-generic/compat.h provides definitions for riscv 32 bit mode. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Cc: palmer@sifive.com Cc: linux-riscv@lists.infradead.org Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-20RISC-V: Don't use a global include guard for uapi/asm/syscalls.hPalmer Dabbelt
This file is expected to be included multiple times in the same file in order to allow the __SYSCALL macro to generate system call tables. With a global include guard we end up missing __NR_riscv_flush_icache in the syscall table, which results in icache flushes that escape the vDSO call to not actually do anything. The fix is to move to per-#define include guards, which allows the system call tables to actually be populated. Thanks to Macrus Comstedt for finding and fixing the bug! Cc: Marcus Comstedt <marcus@mc.pp.se> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-20RISC-V: Define sys_riscv_flush_icache when SMP=nPalmer Dabbelt
This would be necessary to make non-SMP builds work, but there is another error in the implementation of our syscall linkage that actually just causes sys_riscv_flush_icache to never build. I've build tested this on allnoconfig and allnoconfig+SMP=y, as well as defconfig like normal. CC: Christoph Hellwig <hch@infradead.org> CC: Guenter Roeck <linux@roeck-us.net> In-Reply-To: <20180809055830.GA17533@infradead.org> In-Reply-To: <20180809132612.GA31058@roeck-us.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-19Merge tag 'riscv-for-linus-4.19-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains some major improvements to the RISC-V port, including the necessary interrupt controller and timer support to actually make it to userspace. Support for three devices has been added: - the ISA-mandated timers on RISC-V systems. - the ISA-mandated first-level interrupt controller on RISC-V systems, which is handled as part of our core arch code because it's very small and tightly tied to the ISA. - SiFive's platform-level interrupt controller, which talks to the actual devices. In addition to these new devices, there are a handful of cleanups all over the RISC-V tree: - build fixes for various configurations: * A fix to the vDSO build's makefile so it respects CFLAGS. * The addition of __lshrti3, a libgcc derived function necessary for some 32-bit configurations. * !SMP && PERF_EVENTS - Cleanups to the arch code to remove the remnants of old versions of the drivers that were just properly submitted. * Some dead code from the timer driver, most of which wasn't ever even compiled. * Cleanups of some interrupt #defines, which are now local to the interrupt handling code. - Fixes to ptrace(), which while not being sufficient to fully make GDB work are at least sufficient to get simple GDB tasks to work. - Early printk support via RISC-V's architecturally mandated SBI console device. - A fix to our early debug trap handler to ensure it's always aligned. These patches have all been through a fairly extensive review process, but as this enables a whole pile of functionality (ie, userspace) I'm confident we'll need to submit a few more patches. The only concrete issues I know about are the sys_riscv_flush_icache patches, but as I managed to screw those up on Friday I figured it'd be best to let them bake another week. This tag boots a Fedora root filesystem on QEMU's master branch for me, and before this morning's rebase (from 4.18-rc8 to 4.18) it booted on the HiFive Unleashed. Thanks to Christoph Hellwig and the other guys at WD for getting the new drivers in shape!" * tag 'riscv-for-linus-4.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: dt-bindings: interrupt-controller: SiFive Plaform Level Interrupt Controller dt-bindings: interrupt-controller: RISC-V local interrupt controller RISC-V: Fix !CONFIG_SMP compilation error irqchip: add a SiFive PLIC driver RISC-V: Add the directive for alignment of stvec's value clocksource: new RISC-V SBI timer driver RISC-V: implement low-level interrupt handling RISC-V: add a definition for the SIE SEIE bit RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.h RISC-V: simplify software interrupt / IPI code RISC-V: remove timer leftovers RISC-V: Add early printk support via the SBI console RISC-V: Don't increment sepc after breakpoint. RISC-V: implement __lshrti3. RISC-V: Use KBUILD_CFLAGS instead of KCFLAGS when building the vDSO
2018-08-13RISC-V: Fix !CONFIG_SMP compilation errorAtish Patra
Enabling both CONFIG_PERF_EVENTS without !CONFIG_SMP generates following compilation error. arch/riscv/include/asm/perf_event.h:80:2: error: expected specifier-qualifier-list before 'irqreturn_t' irqreturn_t (*handle_irq)(int irq_num, void *dev); ^~~~~~~~~~~ Include interrupt.h in proper place to avoid compilation error. Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13clocksource: new RISC-V SBI timer driverPalmer Dabbelt
The RISC-V ISA defines a per-hart real-time clock and timer, which is present on all systems. The clock is accessed via the 'rdtime' pseudo-instruction (which reads a CSR), and the timer is set via an SBI call. Contains various improvements from Atish Patra <atish.patra@wdc.com>. Signed-off-by: Dmitriy Cherkasov <dmitriy@oss-tech.org> Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com> [hch: remove dead code, add SPDX tags, used riscv_of_processor_hart(), minor cleanups, merged hotplug cpu support and other improvements from Atish] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13RISC-V: add a definition for the SIE SEIE bitChristoph Hellwig
This mirrors the SIE_SSIE and SETE bits that are used in a similar fashion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13RISC-V: remove INTERRUPT_CAUSE_* defines from asm/irq.hChristoph Hellwig
These are only of use to the local irq controller driver, so add them in that driver implementation instead, which will be submitted soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13RISC-V: simplify software interrupt / IPI codeChristoph Hellwig
Rename handle_ipi to riscv_software_interrupt, drop the unused return value and move the prototype to irq.h together with riscv_timer_interupt. This allows simplifying the upcoming interrupt handling support. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-25locking/atomics: Rework ordering barriersMark Rutland
Currently architectures can override __atomic_op_*() to define the barriers used before/after a relaxed atomic when used to build acquire/release/fence variants. This has the unfortunate property of requiring the architecture to define the full wrapper for the atomics, rather than just the barriers they care about, and gets in the way of generating atomics which can be easily read. Instead, this patch has architectures define an optional set of barriers: * __atomic_acquire_fence() * __atomic_release_fence() * __atomic_pre_full_fence() * __atomic_post_full_fence() ... which <linux/atomic.h> uses to build the wrappers. It would be nice if we could undef these, along with the __atomic_op_*() wrappers, but that would break the cmpxchg() wrappers, which are written in preprocessor. Undefs would have been nice, but alas. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Andrea Parri <parri.andrea@gmail.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: andy.shevchenko@gmail.com Cc: arnd@arndb.de Cc: aryabinin@virtuozzo.com Cc: catalin.marinas@arm.com Cc: dvyukov@google.com Cc: glider@google.com Cc: linux-arm-kernel@lists.infradead.org Cc: peter@hurleysoftware.com Link: http://lkml.kernel.org/r/20180716113017.3909-7-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-17Merge tag 'v4.18-rc5' into locking/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-04RISC-V: Add definiion of extract symbol's index and type for 32-bitZong Li
Use generic marco to get the index and type of symbol. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-21atomics/treewide: Make unconditional inc/dec ops optionalMark Rutland
Many of the inc/dec ops are mandatory, but for most architectures inc/dec are simply trivial wrappers around their corresponding add/sub ops. Let's make all the inc/dec ops optional, so that we can get rid of these boilerplate wrappers. The instrumented atomics are updated accordingly. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Palmer Dabbelt <palmer@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20180621121321.4761-17-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21atomics/treewide: Make test ops optionalMark Rutland
Some of the atomics return the result of a test applied after the atomic operation, and almost all architectures implement these as trivial wrappers around the underlying atomic. Specifically: * <atomic>_inc_and_test(v) is (<atomic>_inc_return(v) == 0) * <atomic>_dec_and_test(v) is (<atomic>_dec_return(v) == 0) * <atomic>_sub_and_test(i, v) is (<atomic>_sub_return(i, v) == 0) * <atomic>_add_negative(i, v) is (<atomic>_add_return(i, v) < 0) Rather than have these definitions duplicated in all architectures, with minor inconsistencies in formatting and documentation, let's make these operations optional, with default fallbacks as above. Implementations must now provide a preprocessor symbol. The instrumented atomics are updated accordingly. Both x86 and m68k have custom implementations, which are left as-is, given preprocessor symbols to avoid being overridden. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Palmer Dabbelt <palmer@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20180621121321.4761-16-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21atomics/riscv: Define atomic64_fetch_add_unless()Mark Rutland
As a step towards unifying the atomic/atomic64/atomic_long APIs, this patch converts the arch/riscv implementation of atomic64_add_unless() into an implementation of atomic64_fetch_add_unless(). A wrapper in <linux/atomic.h> will build atomic_add_unless() atop of this, provided it is given a preprocessor definition. No functional change is intended as a result of this patch. Acked-by Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Albert Ou <albert@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20180621121321.4761-14-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21atomics/treewide: Make atomic_fetch_add_unless() optionalMark Rutland
Several architectures these have a near-identical implementation based on atomic_read() and atomic_cmpxchg() which we can instead define in <linux/atomic.h>, so let's do so, using something close to the existing x86 implementation with try_cmpxchg(). Where an architecture provides its own atomic_fetch_add_unless(), it must define a preprocessor symbol for it. The instrumented atomics are updated accordingly. Note that arch/arc's existing atomic_fetch_add_unless() had redundant barriers, as these are already present in its atomic_cmpxchg() implementation. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Palmer Dabbelt <palmer@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Link: https://lore.kernel.org/lkml/20180621121321.4761-7-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21atomics/treewide: Make atomic64_inc_not_zero() optionalMark Rutland
We define a trivial fallback for atomic_inc_not_zero(), but don't do the same for atomic64_inc_not_zero(), leading most architectures to define the same boilerplate. Let's add a fallback in <linux/atomic.h>, and remove the redundant implementations. Note that atomic64_add_unless() is always defined in <linux/atomic.h>, and promotes its arguments to the requisite types, so we need not do this explicitly. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Palmer Dabbelt <palmer@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20180621121321.4761-6-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21atomics/treewide: Remove redundant atomic_inc_not_zero() definitionsMark Rutland
When atomic_inc_not_zero(v) isn't defined, <linux/atomic.h> will define it as falling back to atomic_add_unless((v), 1, 0), so there's no need for arch code to do so. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Palmer Dabbelt <palmer@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20180621121321.4761-3-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-21atomics/treewide: Rename __atomic_add_unless() => atomic_fetch_add_unless()Mark Rutland
While __atomic_add_unless() was originally intended as a building-block for atomic_add_unless(), it's now used in a number of places around the kernel. It's the only common atomic operation named __atomic*(), rather than atomic_*(), and for consistency it would be better named atomic_fetch_add_unless(). This lack of consistency is slightly confusing, and gets in the way of scripting atomics. Given that, let's clean things up and promote it to an official part of the atomics API, in the form of atomic_fetch_add_unless(). This patch converts definitions and invocations over to the new name, including the instrumented version, using the following script: ---- git grep -w __atomic_add_unless | while read line; do sed -i '{s/\<__atomic_add_unless\>/atomic_fetch_add_unless/}' "${line%%:*}"; done git grep -w __arch_atomic_add_unless | while read line; do sed -i '{s/\<__arch_atomic_add_unless\>/arch_atomic_fetch_add_unless/}' "${line%%:*}"; done ---- Note that we do not have atomic{64,_long}_fetch_add_unless(), which will be introduced by later patches. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Palmer Dabbelt <palmer@sifive.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/20180621121321.4761-2-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-06-16Merge tag 'riscv-for-linus-4.18-merge_window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains some small RISC-V updates I'd like to target for 4.18. They are all fairly small this time. Here's a short summary, there's more info in the commits/merges: - a fix to __clear_user to respect the passed arguments. - enough support for the perf subsystem to work with RISC-V's ISA defined performance counters. - support for sparse and cleanups suggested by it. - support for R_RISCV_32 (a relocation, not the 32-bit ISA). - some MAINTAINERS cleanups. - the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's always present. I've given these a simple build+boot test" * tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig RISC-V: Handle R_RISCV_32 in modules riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set riscv: add riscv-specific predefines to CHECKFLAGS riscv: split the declaration of __copy_user riscv: no __user for probe_kernel_address() riscv: use NULL instead of a plain 0 perf: riscv: Add Document for Future Porting Guide perf: riscv: preliminary RISC-V support MAINTAINERS: Update Albert's email, he's back at Berkeley MAINTAINERS: Add myself as a maintainer for SiFive's drivers riscv: Fix the bug in memory access fixup code
2018-06-11RISC-V: Make our port sparse-cleanPalmer Dabbelt
This patch set contains a handful of fixes that clean up the sparse results for the RISC-V port. These patches shouldn't have any functional difference. The patches: * Use NULL instead of 0. * Clean up __user annotations. * Split __copy_user into two functions, to make the __user annotations valid. Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
2018-06-09riscv: split the declaration of __copy_userLuc Van Oostenryck
We use a single __copy_user assembly function to copy memory both from and to userspace. While this works, it triggers sparse errors because we're implicitly casting between the kernel and user address spaces by calling __copy_user. This patch splits the C declaration into a pair of functions, __asm_copy_{to,from}_user, that have sane semantics WRT __user. This split make things fine from sparse's point of view. The assembly implementation keeps a single definition but add a double ENTRY() for it, one for __asm_copy_to_user and another one for __asm_copy_from_user. The result is a spare-safe implementation that pays no performance or code size penalty. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-07mm: introduce ARCH_HAS_PTE_SPECIALLaurent Dufour
Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-07riscv: use NULL instead of a plain 0Luc Van Oostenryck
sbi_remote_sfence_vma() & sbi_remote_fence_i() takes a pointer as first argument but some macros call them with a plain 0 which, while legal C, is frowned upon in the kernel. Change this by replacing the 0 by NULL. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-06-04perf: riscv: preliminary RISC-V supportAlan Kao
This patch provide a basic PMU, riscv_base_pmu, which supports two general hardware event, instructions and cycles. Furthermore, this PMU serves as a reference implementation to ease the portings in the future. riscv_base_pmu should be able to run on any RISC-V machine that conforms to the Priv-Spec. Note that the latest qemu model hasn't fully support a proper behavior of Priv-Spec 1.10 yet, but work around should be easy with very small fixes. Please check https://github.com/riscv/riscv-qemu/pull/115 for future updates. Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Signed-off-by: Alan Kao <alankao@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-05-19riscv: add swiotlb supportChristoph Hellwig
All RISC-V platforms today lack an IOMMU. However, legacy PCI devices sometimes require DMA-memory to be in the low 32 bits. To make this work, we enable the software-based bounce buffers from swiotlb. They only impose overhead when the device in question cannot address the full 64-bit address space, so a perfect fit. This patch assumes that DMA is coherent with the processor and the PCI bus. It also assumes that the processor and devices share a common address space. This is true for all RISC-V platforms so far. [changelog stolen from an earlier patch by Palmer Dabbelt that did the more complicated swiotlb wireup before the recent consolidation] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-05-07PCI: remove PCI_DMA_BUS_IS_PHYSChristoph Hellwig
This was used by the ide, scsi and networking code in the past to determine if they should bounce payloads. Now that the dma mapping always have to support dma to all physical memory (thanks to swiotlb for non-iommu systems) there is no need to this crude hack any more. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv) Reviewed-by: Jens Axboe <axboe@kernel.dk>
2018-04-24riscv: there is no <asm/handle_irq.h>Christoph Hellwig
So don't list it as generic-y. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-04Merge tag 'riscv-for-linus-4.17-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains the new features we'd like to incorporate into the RISC-V port for 4.17. We might have a bit more stuff land later in the merge window, but I wanted to get this out earlier just so everyone can see where we currently stand. A short summary of the changes is: - We've added support for dynamic ftrace on RISC-V targets. - There have been a handful of cleanups to our atomic and locking routines. They now more closely match the released RISC-V memory model draft. - Our module loading support has been cleaned up and is now enabled by default, despite some limitations still existing. - A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE so the generic device tree code picks up handling all our command line stuff. There's more information in the merge commits for each patch set" * tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits) RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE RISC-V: Add definition of relocation types RISC-V: Enable module support in defconfig RISC-V: Support SUB32 relocation type in kernel module RISC-V: Support ADD32 relocation type in kernel module RISC-V: Support ALIGN relocation type in kernel module RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module RISC-V: Support CALL relocation type in kernel module RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module RISC-V: Add section of GOT.PLT for kernel module RISC-V: Add sections of PLT and GOT for kernel module riscv/atomic: Strengthen implementations with fences riscv/spinlock: Strengthen implementations with fences riscv/barrier: Define __smp_{store_release,load_acquire} riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support riscv/ftrace: Add dynamic function graph tracer support riscv/ftrace: Add dynamic function tracer support ...
2018-04-02RISC-V: Fixes to module loadingPalmer Dabbelt
This cleans up the module support that was commited earlier to work with what's actually emitted from our GCC port as it lands upstream. Most of the work here is adding new relocations to the kernel. There's some limitations on module loading imposed by the kernel: * The kernel doesn't support linker relaxation, which is necessary to support R_RISCV_ALIGN. In order to get reliable module building you're going to need to a GCC that supports the new '-mno-relax', which IIRC isn't going to be out until 8.1.0. It's somewhat unlikely that R_RISCV_ALIGN will appear in a module even without '-mno-relax' support, so issues shouldn't be common. * There is no large code model for RISC-V, which means modules must be loaded within a 32-bit signed offset of the kernel. We don't currently have any mechanism for ensuring this memory remains free or moving pages around, so issues here might be common. I fixed a singcle merge conflict in arch/riscv/kernel/Makefile.
2018-04-02RISC-V: Assorted memory model fixesPalmer Dabbelt
These fixes fall into three categories * The definiton of __smp_{store_release,load_acquire}, which allow us to emit a full fence when unnecessary. * Fixes to avoid relying on the behavior of "*.aqrl" atomics, as those are specified in the currently released RISC-V memory model draft in a way that makes them useless for Linux. This might change in the future, but now the code matches the memory model spec as it's written so at least we're getting closer to something sane. The actual fix is to delete the RISC-V specific atomics and drop back to generic versions that use the new fences from above. * Cleanups to our atomic macros, which are mostly non-functional changes. Unfortunately I haven't given these as thorough of a testing as I probably should have, but I've poked through the code and they seem generally OK.
2018-04-02RISC-V: Add definition of relocation typesZong Li
Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02RISC-V: Add section of GOT.PLT for kernel moduleZong Li
Separate the function symbol address from .plt to .got.plt section. The original plt entry has trampoline code with symbol address, there is a 32-bit padding bwtween jar instruction and symbol address. Extract the symbol address to .got.plt to reduce the module size. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02RISC-V: Add sections of PLT and GOT for kernel moduleZong Li
The address of external symbols will locate more than 32-bit offset in 64-bit kernel with sv39 or sv48 virtual addressing. Module loader emits the GOT and PLT entries for data symbols and function symbols respectively. The PLT entry is a trampoline code for jumping to the 64-bit real address. The GOT entry is just the data symbol address. Signed-off-by: Zong Li <zong@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02riscv/atomic: Strengthen implementations with fencesAndrea Parri
Atomics present the same issue with locking: release and acquire variants need to be strengthened to meet the constraints defined by the Linux-kernel memory consistency model [1]. Atomics present a further issue: implementations of atomics such as atomic_cmpxchg() and atomic_add_unless() rely on LR/SC pairs, which do not give full-ordering with .aqrl; for example, current implementations allow the "lr-sc-aqrl-pair-vs-full-barrier" test below to end up with the state indicated in the "exists" clause. In order to "synchronize" LKMM and RISC-V's implementation, this commit strengthens the implementations of the atomics operations by replacing .rl and .aq with the use of ("lightweigth") fences, and by replacing .aqrl LR/SC pairs in sequences such as: 0: lr.w.aqrl %0, %addr bne %0, %old, 1f ... sc.w.aqrl %1, %new, %addr bnez %1, 0b 1: with sequences of the form: 0: lr.w %0, %addr bne %0, %old, 1f ... sc.w.rl %1, %new, %addr /* SC-release */ bnez %1, 0b fence rw, rw /* "full" fence */ 1: following Daniel's suggestion. These modifications were validated with simulation of the RISC-V memory consistency model. C lr-sc-aqrl-pair-vs-full-barrier {} P0(int *x, int *y, atomic_t *u) { int r0; int r1; WRITE_ONCE(*x, 1); r0 = atomic_cmpxchg(u, 0, 1); r1 = READ_ONCE(*y); } P1(int *x, int *y, atomic_t *v) { int r0; int r1; WRITE_ONCE(*y, 1); r0 = atomic_cmpxchg(v, 0, 1); r1 = READ_ONCE(*x); } exists (u=1 /\ v=1 /\ 0:r1=0 /\ 1:r1=0) [1] https://marc.info/?l=linux-kernel&m=151930201102853&w=2 https://groups.google.com/a/groups.riscv.org/forum/#!topic/isa-dev/hKywNHBkAXM https://marc.info/?l=linux-kernel&m=151633436614259&w=2 Suggested-by: Daniel Lustig <dlustig@nvidia.com> Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Daniel Lustig <dlustig@nvidia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Jade Alglave <j.alglave@ucl.ac.uk> Cc: Luc Maranget <luc.maranget@inria.fr> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Akira Yokosawa <akiyks@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02riscv/spinlock: Strengthen implementations with fencesAndrea Parri
Current implementations map locking operations using .rl and .aq annotations. However, this mapping is unsound w.r.t. the kernel memory consistency model (LKMM) [1]: Referring to the "unlock-lock-read-ordering" test reported below, Daniel wrote: "I think an RCpc interpretation of .aq and .rl would in fact allow the two normal loads in P1 to be reordered [...] The intuition would be that the amoswap.w.aq can forward from the amoswap.w.rl while that's still in the store buffer, and then the lw x3,0(x4) can also perform while the amoswap.w.rl is still in the store buffer, all before the l1 x1,0(x2) executes. That's not forbidden unless the amoswaps are RCsc, unless I'm missing something. Likewise even if the unlock()/lock() is between two stores. A control dependency might originate from the load part of the amoswap.w.aq, but there still would have to be something to ensure that this load part in fact performs after the store part of the amoswap.w.rl performs globally, and that's not automatic under RCpc." Simulation of the RISC-V memory consistency model confirmed this expectation. In order to "synchronize" LKMM and RISC-V's implementation, this commit strengthens the implementations of the locking operations by replacing .rl and .aq with the use of ("lightweigth") fences, resp., "fence rw, w" and "fence r , rw". C unlock-lock-read-ordering {} /* s initially owned by P1 */ P0(int *x, int *y) { WRITE_ONCE(*x, 1); smp_wmb(); WRITE_ONCE(*y, 1); } P1(int *x, int *y, spinlock_t *s) { int r0; int r1; r0 = READ_ONCE(*y); spin_unlock(s); spin_lock(s); r1 = READ_ONCE(*x); } exists (1:r0=1 /\ 1:r1=0) [1] https://marc.info/?l=linux-kernel&m=151930201102853&w=2 https://groups.google.com/a/groups.riscv.org/forum/#!topic/isa-dev/hKywNHBkAXM https://marc.info/?l=linux-kernel&m=151633436614259&w=2 Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Daniel Lustig <dlustig@nvidia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Will Deacon <will.deacon@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: Jade Alglave <j.alglave@ucl.ac.uk> Cc: Luc Maranget <luc.maranget@inria.fr> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Akira Yokosawa <akiyks@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02riscv/barrier: Define __smp_{store_release,load_acquire}Andrea Parri
Introduce __smp_{store_release,load_acquire}, and rely on the generic definitions for smp_{store_release,load_acquire}. This avoids the use of full ("rw,rw") fences on SMP. Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS supportAlan Kao
Cc: Greentime Hu <greentime@andestech.com> Signed-off-by: Alan Kao <alankao@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS supportAlan Kao
Cc: Greentime Hu <greentime@andestech.com> Signed-off-by: Alan Kao <alankao@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02riscv/ftrace: Add dynamic function tracer supportAlan Kao
We now have dynamic ftrace with the following added items: * ftrace_make_call, ftrace_make_nop (in kernel/ftrace.c) The two functions turn each recorded call site of filtered functions into a call to ftrace_caller or nops * ftracce_update_ftrace_func (in kernel/ftrace.c) turns the nops at ftrace_call into a call to a generic entry for function tracers. * ftrace_caller (in kernel/mcount-dyn.S) The entry where each _mcount call sites calls to once they are filtered to be traced. Also, this patch fixes the semantic problems in mcount.S, which will be treated as only a reference implementation once we have the dynamic ftrace. Cc: Greentime Hu <greentime@andestech.com> Signed-off-by: Alan Kao <alankao@andestech.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-03-14RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handlerPalmer Dabbelt
The existing mechanism for handling IRQs on RISC-V is pretty ugly: the irq entry code selects the handler via Kconfig dependencies. Use the new generic IRQ handling infastructure, which allows boot time registration of the low level entry handler. This does add an additional load to the interrupt latency, but there's a lot of tuning left to be done there on RISC-V so it's OK for now. Signed-off-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Stafford Horne <shorne@gmail.com> Cc: jonas@southpole.se Cc: catalin.marinas@arm.com Cc: Will Deacon <will.deacon@arm.com> Cc: linux@armlinux.org.uk Cc: stefan.kristiansson@saunalahti.fi Cc: openrisc@lists.librecores.org Cc: linux-riscv@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Link: https://lkml.kernel.org/r/20180307235731.22627-3-palmer@sifive.com
2018-02-26riscv/barrier: Define __smp_{mb,rmb,wmb}Andrea Parri
Introduce __smp_{mb,rmb,wmb}, and rely on the generic definitions for smp_{mb,rmb,wmb}. A first consequence is that smp_{mb,rmb,wmb} map to a compiler barrier on !SMP (while their definition remains unchanged on SMP). As a further consequence, smp_load_acquire and smp_store_release have "fence rw,rw" instead of "fence iorw,iorw". Signed-off-by: Andrea Parri <parri.andrea@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-02-07Merge tag 'riscv-for-linus-4.16-merge_window' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains the fixes we'd like to target for the 4.16 merge window. It's not as much as I was originally hoping to do but between glibc, the chip, and FOSDEM there just wasn't enough time to get everything put together. As such, this merge window is essentially just going to be small changes. This includes mostly cleanups: - A build fix failure to the audit test cases. RISC-V doesn't have renameat because the generic syscall ABI moved to renameat2 by the time of our port. The syscall audit test cases don't understand this, so I added a trivial fix. This went through mailing list review during the 4.15 merge window, but nobody has picked it up so I think it's best to just do this here. - The removal of our command-line argument processing code. The "mem_end" stuff was broken and the rest duplicated generic device tree code. The generic code was already being called. - Some unused/redundant code has been removed, including __ARCH_HAVE_MMU, current_pgdir, and the initialization of init_mm.pgd. - SUM is disabled upon taking a trap, which means that user memory is protected during traps taking inside copy_{to,from}_user(). - The sptbr CSR has been renamed to satp in C code. We haven't changed the assembly code in order to maintain compatibility with binutils 2.29, which doesn't understand the new name. Additionally, we're adding some new features: - Basic ftrace support, thanks to Alan Kao! - Support for ZONE_DMA32. This is necessary for all the normal reasons, but also to deal with a deficiency in the Xilinx PCIe controller we're using on our FPGA-based systems. While the ZONE_DMA32 addition should be sufficient for most uses, it doesn't complete the fix for the Xilinx controller. - TLB shootdowns now only target the harts where they're necessary, instead of applying to all harts in the system. These patches have all been sitting on our linux-next branch for a while now. Due to time constraints this is all I feel comfortable submitting during the 4.16 merge window, hopefully we'll do better next time!" [ Note to self: "harts" is RISC-V speak for "hardware threads". I had to look that up. - Linus ] * tag 'riscv-for-linus-4.16-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: riscv: inline set_pgdir into its only caller riscv: rename sptbr to satp riscv: don't read back satp in paging_init riscv: remove the unused current_pgdir function riscv: add ZONE_DMA32 RISC-V: Limit the scope of TLB shootdowns riscv: disable SUM in the exception handler riscv: remove redundant unlikely() riscv: remove unused __ARCH_HAVE_MMU define riscv/ftrace: Add basic support RISC-V: Remove mem_end command line processing RISC-V: Remove duplicate command-line parsing logic audit: Avoid build failures on systems without renameat
2018-02-01Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework has a handful of patches this time around, mostly due to the clk rate protection support added by Jerome Brunet. This feature will allow consumers to lock in a certain rate on the output of a clk so that things like audio playback don't hear pops when the clk frequency changes due to shared parent clks changing rates. Currently the clk API doesn't guarantee the rate of a clk stays at the rate you request after clk_set_rate() is called, so this new API will allow drivers to express that requirement. Beyond this, the core got some debugfs pretty printing patches and a couple minor non-critical fixes. Looking outside of the core framework diff we have some new driver additions and the removal of a legacy TI clk driver. Both of these hit high in the dirstat. Also, the removal of the asm-generic/clkdev.h file causes small one-liners in all the architecture Kbuild files. Overall, the driver diff seems to be the normal stuff that comes all the time to fix little problems here and there and to support new hardware. Summary: Core: - Clk rate protection - Symbolic clk flags in debugfs output - Clk registration enabled clks while doing bookkeeping updates New Drivers: - Spreadtrum SC9860 - HiSilicon hi3660 stub - Qualcomm A53 PLL, SPMI clkdiv, and MSM8916 APCS - Amlogic Meson-AXG - ASPEED BMC Removed Drivers: - TI OMAP 3xxx legacy clk (non-DT) support - asm*/clkdev.h got removed (not really a driver) Updates: - Renesas FDP1-0 module clock on R-Car M3-W - Renesas LVDS module clock on R-Car V3M - Misc fixes to pr_err() prints - Qualcomm MSM8916 audio fixes - Qualcomm IPQ8074 rounded out support for more peripherals - Qualcomm Alpha PLL variants - Divider code was using container_of() on bad pointers - Allwinner DE2 clks on H3 - Amlogic minor data fixes and dropping of CLK_IGNORE_UNUSED - Mediatek clk driver compile test support - AT91 PMC clk suspend/resume restoration support - PLL issues fixed on si5351 - Broadcom IProc PLL calculation updates - DVFS support for Armada mvebu CPU clks - Allwinner fixed post-divider support - TI clkctrl fixes and support for newer SoCs" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (125 commits) clk: aspeed: Handle inverse polarity of USB port 1 clock gate clk: aspeed: Fix return value check in aspeed_cc_init() clk: aspeed: Add reset controller clk: aspeed: Register gated clocks clk: aspeed: Add platform driver and register PLLs clk: aspeed: Register core clocks clk: Add clock driver for ASPEED BMC SoCs clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built clk: fix reentrancy of clk_enable() on UP systems clk: meson-axg: fix potential NULL dereference in axg_clkc_probe() clk: Simplify debugfs registration clk: Fix debugfs_create_*() usage clk: Show symbolic clock flags in debugfs clk: renesas: r8a7796: Add FDP clock clk: Move __clk_{get,put}() into private clk.h API clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks clk: Improve flags doc for of_clk_detect_critical() arch: Remove clkdev.h asm-generic from Kbuild clk: sunxi-ng: a83t: Add M divider to TCON1 clock clk: Prepare to remove asm-generic/clkdev.h ...
2018-01-31Merge tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma mapping updates from Christoph Hellwig: "Except for a runtime warning fix from Christian this is all about consolidation of the generic no-IOMMU code, a well as the glue code for swiotlb. All the code is based on the x86 implementation with hooks to allow all architectures that aren't cache coherent to use it. The x86 conversion itself has been deferred because the x86 maintainers were a little busy in the last months" * tag 'dma-mapping-4.16' of git://git.infradead.org/users/hch/dma-mapping: (57 commits) MAINTAINERS: add the iommu list for swiotlb and xen-swiotlb arm64: use swiotlb_alloc and swiotlb_free arm64: replace ZONE_DMA with ZONE_DMA32 mips: use swiotlb_{alloc,free} mips/netlogic: remove swiotlb support tile: use generic swiotlb_ops tile: replace ZONE_DMA with ZONE_DMA32 unicore32: use generic swiotlb_ops ia64: remove an ifdef around the content of pci-dma.c ia64: clean up swiotlb support ia64: use generic swiotlb_ops ia64: replace ZONE_DMA with ZONE_DMA32 swiotlb: remove various exports swiotlb: refactor coherent buffer allocation swiotlb: refactor coherent buffer freeing swiotlb: wire up ->dma_supported in swiotlb_dma_ops swiotlb: add common swiotlb_map_ops swiotlb: rename swiotlb_free to swiotlb_exit x86: rename swiotlb_dma_ops powerpc: rename swiotlb_dma_ops ...
2018-01-30riscv: inline set_pgdir into its only callerChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-30riscv: rename sptbr to satpChristoph Hellwig
satp is the name used by the current privileged spec 1.10, use it instead of the old name. The most recent release binutils release (2.29) doesn't know about the satp name yet, so stick to the name from the previous privileged ISA release and comment on the fact. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-01-30riscv: remove the unused current_pgdir functionChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>