aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2019-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Off by one and bounds checking fixes in NFC, from Dan Carpenter. 2) There have been many weird regressions in r8169 since we turned ASPM support on, some are still not understood nor completely resolved. Let's turn this back off for now. From Heiner Kallweit. 3) Signess fixes for ethtool speed value handling, from Michael Zhivich. 4) Handle timestamps properly in macb driver, from Paul Thomas. 5) Two erspan fixes, it's the usual "skb ->data potentially reallocated and we're holding a stale protocol header pointer". From Lorenzo Bianconi. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bnxt_en: Reset device on RX buffer errors. bnxt_en: Improve RX consumer index validity check. net: macb driver, check for SKBTX_HW_TSTAMP qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constant broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant ethtool: avoid signed-unsigned comparison in ethtool_validate_speed() net: ip6_gre: fix possible use-after-free in ip6erspan_rcv net: ip_gre: fix possible use-after-free in erspan_rcv r8169: disable ASPM again MAINTAINERS: ieee802154: update documentation file pattern net: vrf: Fix ping failed when vrf mtu is set to 0 selftests: add a tc matchall test case nfc: nci: Potential off by one in ->pipes[] array NFC: nci: Add some bounds checking in nci_hci_cmd_received()
2019-04-08bnxt_en: Reset device on RX buffer errors.Michael Chan
If the RX completion indicates RX buffers errors, the RX ring will be disabled by firmware and no packets will be received on that ring from that point on. Recover by resetting the device. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08bnxt_en: Improve RX consumer index validity check.Michael Chan
There is logic to check that the RX/TPA consumer index is the expected index to work around a hardware problem. However, the potentially bad consumer index is first used to index into an array to reference an entry. This can potentially crash if the bad consumer index is beyond legal range. Improve the logic to use the consumer index for dereferencing after the validity check and log an error message. Fixes: fa7e28127a5a ("bnxt_en: Add workaround to detect bad opaque in rx completion (part 2)") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08net: macb driver, check for SKBTX_HW_TSTAMPPaul Thomas
Make sure SKBTX_HW_TSTAMP (i.e. SOF_TIMESTAMPING_TX_HARDWARE) has been enabled for this skb. It does fix the issue where normal socks that aren't expecting a timestamp will not wake up on select, but when a user does want a SOF_TIMESTAMPING_TX_HARDWARE it does work. Signed-off-by: Paul Thomas <pthomas8589@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08qlogic: qlcnic: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich
qlcnic driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constantMichael Zhivich
tg3 driver uses u16 to store SPEED_UKNOWN ethtool constant, which is defined as -1, resulting in value truncation and thus incorrect test results against SPEED_UNKNOWN. For example, the following test will print "False": u16 speed = SPEED_UNKNOWN; if (speed == SPEED_UNKNOWN) printf("True"); else printf("False"); Change storage of speed to use u32 to avoid this issue. Signed-off-by: Michael Zhivich <mzhivich@akamai.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08tpm: Fix the type of the return value in calc_tpm2_event_size()Yue Haibing
calc_tpm2_event_size() has an invalid signature because it returns a 'size_t' where as its signature says that it returns 'int'. Cc: <stable@vger.kernel.org> Fixes: 4d23cc323cdb ("tpm: add securityfs support for TPM 2.0 firmware event log") Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: fix an invalid condition in tpm_common_pollTadeusz Struk
The poll condition should only check response_length, because reads should only be issued if there is data to read. The response_read flag only prevents double writes. The problem was that the write set the response_read to false, enqued a tpm job, and returned. Then application called poll which checked the response_read flag and returned EPOLLIN. Then the application called read, but got nothing. After all that the async_work kicked in. Added also mutex_lock around the poll check to prevent other possible race conditions. Fixes: 9488585b21bef0df12 ("tpm: add support for partial reads") Reported-by: Mantas Mikulėnas <grawity@gmail.com> Tested-by: Mantas Mikulėnas <grawity@gmail.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08tpm: turn on TPM on suspend for TPM 1.xJarkko Sakkinen
tpm_chip_start/stop() should be also called for TPM 1.x devices on suspend. Add that functionality back. Do not lock the chip because it is unnecessary as there are no multiple threads using it when doing the suspend. Fixes: a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()") Reported-by: Paul Zimmerman <pauldzim@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Domenico Andreoli <domenico.andreoli@linux.com> Signed-off-by: James Morris <james.morris@microsoft.com>
2019-04-08r8169: disable ASPM againHeiner Kallweit
There's a significant number of reports that re-enabling ASPM causes different issues, ranging from decreased performance to system not booting at all. This affects only a minority of users, but the number of affected users is big enough that we better switch off ASPM again. This will hurt notebook users who are not affected by the issues, they may see decreased battery runtime w/o ASPM. With the PCI core folks is being discussed to add generic sysfs attributes to control ASPM. Once this is in place brave enough users can re-enable ASPM on their system. Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a bug in the implementation of xcbc and cmac in caam" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - fix copy of next buffer for xcbc and cmac
2019-04-07net: vrf: Fix ping failed when vrf mtu is set to 0Miaohe Lin
When the mtu of a vrf device is set to 0, it would cause ping failed. So I think we should limit vrf mtu in a reasonable range to solve this problem. I set dev->min_mtu to IPV6_MIN_MTU, so it will works for both ipv4 and ipv6. And if dev->max_mtu still be 0 can be confusing, so I set dev->max_mtu to ETH_MAX_MTU. Here is the reproduce step: 1.Config vrf interface and set mtu to 0: 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vrf1 state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff 2.Ping peer: 3: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vrf1 state UP group default qlen 1000 link/ether 52:54:00:9e:dd:c1 brd ff:ff:ff:ff:ff:ff inet 10.0.0.1/16 scope global enp4s0 valid_lft forever preferred_lft forever connect: Network is unreachable 3.Set mtu to default value, ping works: PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=1.88 ms Fixes: ad49bc6361ca2 ("net: vrf: remove MTU limits for vrf device") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-07Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes from the last few weeks. Most of them are smaller tweaks and fixes to DT and hardware descriptions for boards. Some of the more significant ones are: - eMMC and RGMII stability tweaks for rk3288 - DDC fixes for Rock PI 4 - Audio fixes for two TI am335x eval boards - D_CAN clock fix for am335x - Compilation fixes for clang - !HOTPLUG_CPU compilation fix for one of the new platforms this release (milbeaut) - A revert of a gpio fix for nomadik that instead was fixed in the gpio subsystem - Whitespace fix for the DT JSON schema (no tabs allowed)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU ARM: iop: don't use using 64-bit DMA masks ARM: orion: don't use using 64-bit DMA masks Revert "ARM: dts: nomadik: Fix polarity of SPI CS" dt-bindings: cpu: Fix JSON schema arm/mach-at91/pm : fix possible object reference leak ARM: dts: at91: Fix typo in ISC_D0 on PC9 ARM: dts: Fix dcan clkctrl clock for am3 reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi ARM: dts: rockchip: Fix gpu opp node names for rk3288 ARM: dts: am335x-evmsk: Correct the regulators for the audio codec ARM: dts: am335x-evm: Correct the regulators for the audio codec ARM: OMAP2+: add missing of_node_put after of_device_is_available ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's arm64: dts: rockchip: fix rk3328 sdmmc0 write errors arm64: dts: rockchip: fix rk3328 rgmii high tx error rate ...
2019-04-07Merge tag 'for-linus-20190407' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Fixups for the pf/pcd queue handling (YueHaibing) - Revert of the three direct issue changes as they have been proven to cause an issue with dm-mpath (Bart) - Plug rq_count reset fix (Dongli) - io_uring double free in fileset registration error handling (me) - Make null_blk handle bad numa node passed in (John) - BFQ ifdef fix (Konstantin) - Flush queue leak fix (Shenghui) - Plug trace fix (Yufen) * tag 'for-linus-20190407' of git://git.kernel.dk/linux-block: xsysace: Fix error handling in ace_setup null_blk: prevent crash from bad home_node value block: Revert v5.0 blk_mq_request_issue_directly() changes paride/pcd: Fix potential NULL pointer dereference and mem leak blk-mq: do not reset plug->rq_count before the list is sorted paride/pf: Fix potential NULL pointer dereference io_uring: fix double free in case of fileset regitration failure blk-mq: add trace block plug and unplug for multiple queues block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=y
2019-04-07Merge tag 'reset-fixes-for-v5.1' of git://git.pengutronix.de/pza/linux into ↵Olof Johansson
arm/fixes Reset controller fixes for v5.1 This tag adds missing USB PHY reset lines to the Meson G12A reset controller header and fixes the Meson Audio ARB driver to prevent module unloading while it is in use. * tag 'reset-fixes-for-v5.1' of git://git.pengutronix.de/pza/linux: reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets Signed-off-by: Olof Johansson <olof@lixom.net>
2019-04-07Merge tag 'for-linus-5.1b-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "One minor fix and a small cleanup for the xen privcmd driver" * tag 'for-linus-5.1b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Prevent buffer overflow in privcmd ioctl xen: use struct_size() helper in kzalloc()
2019-04-07Merge tag 'mtd/fixes-for-5.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fix from Richard Weinberger: "A single fix for a possible infinite loop in the cfi_cmdset_0002 driver" * tag 'mtd/fixes-for-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_buffer
2019-04-07Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Five small fixes. Four in three drivers: qedi, lpfc and storvsc. The final one is labelled core, but merely adds a dh rdac entry for Lenovo systems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Fix missing wakeups on abort threads scsi: storvsc: Reduce default ring buffer size to 128 Kbytes scsi: storvsc: Fix calculation of sub-channel count scsi: core: add new RDAC LENOVO/DE_Series device scsi: qedi: remove declaration of nvm_image from stack
2019-04-06Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "A simple but wanted driver bugfix" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: imx: don't leak the i2c adapter on error
2019-04-06Merge branch 'parisc-5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "A 32-bit boot regression fix introduced in the merge window, a QEMU detection fix and two fixes by Sven regarding ptrace & kprobes" * 'parisc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Detect QEMU earlier in boot process parisc: also set iaoq_b in instruction_pointer_set() parisc: regs_return_value() should return gpr28 Revert: parisc: Use F_EXTEND() macro in iosapic code
2019-04-06Revert: parisc: Use F_EXTEND() macro in iosapic codeHelge Deller
Revert parts of commit 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code"). It breaks booting the 32-bit kernel on some machines. Reported-by: Sven Schnelle <svens@stackframe.org> Tested-by: Sven Schnelle <svens@stackframe.org> Fixes: 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code") Signed-off-by: Helge Deller <deller@gmx.de>
2019-04-06fs: stream_open - opener for stream-like files so that read and write can ↵Kirill Smelkov
run simultaneously without deadlock Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added locking for file.f_pos access and in particular made concurrent read and write not possible - now both those functions take f_pos lock for the whole run, and so if e.g. a read is blocked waiting for data, write will deadlock waiting for that read to complete. This caused regression for stream-like files where previously read and write could run simultaneously, but after that patch could not do so anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes to /proc/xen/xenbus") which fixes such regression for particular case of /proc/xen/xenbus. The patch that added f_pos lock in 2014 did so to guarantee POSIX thread safety for read/write/lseek and added the locking to file descriptors of all regular files. In 2014 that thread-safety problem was not new as it was already discussed earlier in 2006. However even though 2006'th version of Linus's patch was adding f_pos locking "only for files that are marked seekable with FMODE_LSEEK (thus avoiding the stream-like objects like pipes and sockets)", the 2014 version - the one that actually made it into the tree as 9c225f2655e3 - is doing so irregardless of whether a file is seekable or not. See https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/ https://lwn.net/Articles/180387 https://lwn.net/Articles/180396 for historic context. The reason that it did so is, probably, that there are many files that are marked non-seekable, but e.g. their read implementation actually depends on knowing current position to correctly handle the read. Some examples: kernel/power/user.c snapshot_read fs/debugfs/file.c u32_array_read fs/fuse/control.c fuse_conn_waiting_read + ... drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read arch/s390/hypfs/inode.c hypfs_read_iter ... Despite that, many nonseekable_open users implement read and write with pure stream semantics - they don't depend on passed ppos at all. And for those cases where read could wait for something inside, it creates a situation similar to xenbus - the write could be never made to go until read is done, and read is waiting for some, potentially external, event, for potentially unbounded time -> deadlock. Besides xenbus, there are 14 such places in the kernel that I've found with semantic patch (see below): drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write() drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write() drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write() drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write() net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write() drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write() drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write() drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write() net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write() drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write() drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write() drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write() drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write() drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write() In addition to the cases above another regression caused by f_pos locking is that now FUSE filesystems that implement open with FOPEN_NONSEEKABLE flag, can no longer implement bidirectional stream-like files - for the same reason as above e.g. read can deadlock write locking on file.f_pos in the kernel. FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse: implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and write routines not depending on current position at all, and with both read and write being potentially blocking operations: See https://github.com/libfuse/osspd https://lwn.net/Articles/308445 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510 Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as "somewhat pipe-like files ..." with read handler not using offset. However that test implements only read without write and cannot exercise the deadlock scenario: https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131 https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163 https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216 I've actually hit the read vs write deadlock for real while implementing my FUSE filesystem where there is /head/watch file, for which open creates separate bidirectional socket-like stream in between filesystem and its user with both read and write being later performed simultaneously. And there it is semantically not easy to split the stream into two separate read-only and write-only channels: https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169 Let's fix this regression. The plan is: 1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS - doing so would break many in-kernel nonseekable_open users which actually use ppos in read/write handlers. 2. Add stream_open() to kernel to open stream-like non-seekable file descriptors. Read and write on such file descriptors would never use nor change ppos. And with that property on stream-like files read and write will be running without taking f_pos lock - i.e. read and write could be running simultaneously. 3. With semantic patch search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. 4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via steam_open if that bit is present in filesystem open reply. It was tempting to change fs/fuse/ open handler to use stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE, and in particular GVFS which actually uses offset in its read and write handlers https://codesearch.debian.net/search?q=-%3Enonseekable+%3D https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481 so if we would do such a change it will break a real user. 5. Add stream_open and FOPEN_STREAM handling to stable kernels starting from v3.14+ (the kernel where 9c225f2655 first appeared). This will allow to patch OSSPD and other FUSE filesystems that provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE in their open handler and this way avoid the deadlock on all kernel versions. This should work because fs/fuse/ ignores unknown open flags returned from a filesystem and so passing FOPEN_STREAM to a kernel that is not aware of this flag cannot hurt. In turn the kernel that is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE is sufficient to implement streams without read vs write deadlock. This patch adds stream_open, converts /proc/xen/xenbus to it and adds semantic patch to automatically locate in-kernel places that are either required to be converted due to read vs write deadlock, or that are just safe to be converted because read and write do not use ppos and there are no other funky methods in file_operations. Regarding semantic patch I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-06xsysace: Fix error handling in ace_setupGuenter Roeck
If xace hardware reports a bad version number, the error handling code in ace_setup() calls put_disk(), followed by queue cleanup. However, since the disk data structure has the queue pointer set, put_disk() also cleans and releases the queue. This results in blk_cleanup_queue() accessing an already released data structure, which in turn may result in a crash such as the following. [ 10.681671] BUG: Kernel NULL pointer dereference at 0x00000040 [ 10.681826] Faulting instruction address: 0xc0431480 [ 10.682072] Oops: Kernel access of bad area, sig: 11 [#1] [ 10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440 [ 10.682387] Modules linked in: [ 10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc6-next-20190218+ #2 [ 10.682733] NIP: c0431480 LR: c043147c CTR: c0422ad8 [ 10.682863] REGS: cf82fbe0 TRAP: 0300 Tainted: G W (5.0.0-rc6-next-20190218+) [ 10.683065] MSR: 00029000 <CE,EE,ME> CR: 22000222 XER: 00000000 [ 10.683236] DEAR: 00000040 ESR: 00000000 [ 10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000 [ 10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000 [ 10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000 [ 10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800 [ 10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114 [ 10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114 [ 10.684602] Call Trace: [ 10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable) [ 10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c [ 10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68 [ 10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c [ 10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508 [ 10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8 [ 10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c [ 10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464 [ 10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4 [ 10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc [ 10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0 [ 10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234 [ 10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c [ 10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac [ 10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330 [ 10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478 [ 10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114 [ 10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c [ 10.687349] Instruction dump: [ 10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008 [ 10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008 [ 10.688056] ---[ end trace 13c9ff51d41b9d40 ]--- Fix the problem by setting the disk queue pointer to NULL before calling put_disk(). A more comprehensive fix might be to rearrange the code to check the hardware version before initializing data structures, but I don't know if this would have undesirable side effects, and it would increase the complexity of backporting the fix to older kernels. Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface") Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06null_blk: prevent crash from bad home_node valueJohn Pittman
At module load, if the selected home_node value is greater than the available numa nodes, the system will crash in __alloc_pages_nodemask() due to a bad paging request. Prevent this user error crash by detecting the bad value, logging an error, and setting g_home_node back to the default of NUMA_NO_NODE. Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06Merge tag 'rtc-5.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: - Various alarm fixes for da9063, cros-ec and sh - sd3078 manufacturer name fix as this was introduced this cycle * tag 'rtc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: da9063: set uie_unsupported when relevant rtc: sd3078: fix manufacturer name rtc: sh: Fix invalid alarm warning for non-enabled alarm rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured
2019-04-06i2c: imx: don't leak the i2c adapter on errorLaurentiu Tudor
Make sure to free the i2c adapter on the error exit path. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-04-05Merge tag 'for-5.1/dm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Two queue_limits stacking fixes: disable discards if underlying driver does. And propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors. - Fix that reverts a DM core limit that wasn't needed given that dm-crypt was already updated to impose an equivalent limit. - Fix dm-init to properly establish 'const' for __initconst array. - Fix deadlock in DM integrity target that occurs when overlapping IO is being issued to it. And two smaller fixes to the DM integrity target. * tag 'for-5.1/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: fix deadlock with overlapping I/O dm: disable DISCARD if the underlying storage no longer supports it dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors dm: revert 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE") dm init: fix const confusion for dm_allowed_targets array dm integrity: make dm_integrity_init and dm_integrity_exit static dm integrity: change memcmp to strncmp in dm_integrity_ctr
2019-04-05Merge tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Fix clang printk format errors (Louis Taylor) - Declare structure static to fix sparse warning (Wang Hai) - Limit user DMA mappings per container (CVE-2019-3882) (Alex Williamson) * tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfio: vfio/type1: Limit DMA mappings per container vfio/spapr_tce: Make symbol 'tce_iommu_driver_ops' static vfio/pci: use correct format characters
2019-04-05dm integrity: fix deadlock with overlapping I/OMikulas Patocka
dm-integrity will deadlock if overlapping I/O is issued to it, the bug was introduced by commit 724376a04d1a ("dm integrity: implement fair range locks"). Users rarely use overlapping I/O so this bug went undetected until now. Fix this bug by correcting, likely cut-n-paste, typos in ranges_overlap() and also remove a flawed ranges_overlap() check in remove_range_unlocked(). This condition could leave unprocessed bios hanging on wait_list forever. Cc: stable@vger.kernel.org # v4.19+ Fixes: 724376a04d1a ("dm integrity: implement fair range locks") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-05tty: mark Siemens R3964 line discipline as BROKENGreg Kroah-Hartman
The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place. After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things. Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05paride/pcd: Fix potential NULL pointer dereference and mem leakYueHaibing
Syzkaller report this: pcd: pcd version 1.07, major 46, nice 0 pcd0: Autoprobe failed pcd: No CD-ROM drive found kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4525 Comm: syz-executor.0 Not tainted 5.1.0-rc3+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:pcd_init+0x95c/0x1000 [pcd] Code: c4 ab f7 48 89 d8 48 c1 e8 03 80 3c 28 00 74 08 48 89 df e8 56 a3 da f7 4c 8b 23 49 8d bc 24 80 05 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 74 05 e8 39 a3 da f7 49 8b bc 24 80 05 00 00 e8 cc b2 RSP: 0018:ffff8881e84df880 EFLAGS: 00010202 RAX: 00000000000000b0 RBX: ffffffffc155a088 RCX: ffffffffc1508935 RDX: 0000000000040000 RSI: ffffc900014f0000 RDI: 0000000000000580 RBP: dffffc0000000000 R08: ffffed103ee658b8 R09: ffffed103ee658b8 R10: 0000000000000001 R11: ffffed103ee658b7 R12: 0000000000000000 R13: ffffffffc155a778 R14: ffffffffc155a4a8 R15: 0000000000000003 FS: 00007fe71bee3700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a7334441a8 CR3: 00000001e9674003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? 0xffffffffc1508000 ? 0xffffffffc1508000 do_one_initcall+0xbc/0x47d init/main.c:901 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe71bee2c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00007fe71bee2c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe71bee36bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: pcd(+) paride solos_pci atm ts_fsm rtc_mt6397 mac80211 nhc_mobility nhc_udp nhc_ipv6 nhc_hop nhc_dest nhc_fragment nhc_routing 6lowpan rtc_cros_ec memconsole intel_xhci_usb_role_switch roles rtc_wm8350 usbcore industrialio_triggered_buffer kfifo_buf industrialio asc7621 dm_era dm_persistent_data dm_bufio dm_mod tpm gnss_ubx gnss_serial serdev gnss max2165 cpufreq_dt hid_penmount hid menf21bmc_wdt rc_core n_tracesink ide_gd_mod cdns_csi2tx v4l2_fwnode videodev media pinctrl_lewisburg pinctrl_intel iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 crypto_simd ide_pci_generic piix input_leds cryptd glue_helper psmouse ide_core intel_agp serio_raw intel_gtt ata_generic i2c_piix4 agpgart pata_acpi parport_pc parport floppy rtc_cmos sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: bmc150_magn] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace d873691c3cd69f56 ]--- If alloc_disk fails in pcd_init_units, cd->disk will be NULL, however in pcd_detect and pcd_exit, it's not check this before free.It may result a NULL pointer dereference. Also when register_blkdev failed, blk_cleanup_queue() and blk_mq_free_tag_set() should be called to free resources. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 81b74ac68c28 ("paride/pcd: cleanup queues when detection fails") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-05xen: use struct_size() helper in kzalloc()Andrea Righi
struct privcmd_buf_vma_private has a zero-sized array at the end (pages), use the new struct_size() helper to determine the proper allocation size and avoid potential type mistakes. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-04-04Merge tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Pretty quiet week, just some amdgpu and i915 fixes. i915: - deadlock fix - gvt fixes amdgpu: - PCIE dpm feature fix - Powerplay fixes" * tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm: drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug drm/i915/gvt: Correct the calculation of plane size drm/amdgpu: remove unnecessary rlc reset function on gfx9 drm/i915: Always backoff after a drm_modeset_lock() deadlock drm/i915/gvt: do not let pin count of shadow mm go negative drm/i915/gvt: do not deliver a workload if its creation fails drm/amd/display: VBIOS can't be light up HDMI when restart system drm/amd/powerplay: fix possible hang with 3+ 4K monitors drm/amd/powerplay: correct data type to avoid overflow drm/amd/powerplay: add ECC feature bit drm/amd/amdgpu: fix PCIe dpm feature issue (v3)
2019-04-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Several hash table refcount fixes in batman-adv, from Sven Eckelmann. 2) Use after free in bpf_evict_inode(), from Daniel Borkmann. 3) Fix mdio bus registration in ixgbe, from Ivan Vecera. 4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni. 5) ila rhashtable corruption fix from Herbert Xu. 6) Don't allow upper-devices to be added to vrf devices, from Sabrina Dubroca. 7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork. 8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype, from Alexander Lobakin. 9) Missing IDR checks in mlx5 driver, from Aditya Pakki. 10) Fix false connection termination in ktls, from Jakub Kicinski. 11) Work around some ASPM issues with r8169 by disabling rx interrupt coalescing on certain chips. From Heiner Kallweit. 12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo Abeni. 13) Fully initialize sockaddr_in structures in SCTP, from Xin Long. 14) Various BPF flow dissector fixes from Stanislav Fomichev. 15) Divide by zero in act_sample, from Davide Caratti. 16) Fix bridging multicast regression introduced by rhashtable conversion, from Nikolay Aleksandrov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) ibmvnic: Fix completion structure initialization ipv6: sit: reset ip header pointer in ipip6_rcv net: bridge: always clear mcast matching struct on reports and leaves libcxgb: fix incorrect ppmax calculation vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x sch_cake: Make sure we can write the IP header before changing DSCP bits sch_cake: Use tc_skb_protocol() helper for getting packet protocol tcp: Ensure DCTCP reacts to losses net/sched: act_sample: fix divide by zero in the traffic path net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop net: hns: Fix sparse: some warnings in HNS drivers net: hns: Fix WARNING when remove HNS driver with SMMU enabled net: hns: fix ICMP6 neighbor solicitation messages discard problem net: hns: Fix probabilistic memory overwrite when HNS driver initialized net: hns: Use NAPI_POLL_WEIGHT for hns driver net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw() flow_dissector: rst'ify documentation ipv6: Fix dangling pointer when ipv6 fragment net-gro: Fix GRO flush when receiving a GSO packet. flow_dissector: document BPF flow dissector environment ...
2019-04-04ibmvnic: Fix completion structure initializationThomas Falcon
Fix device initialization completion handling for vNIC adapters. Initialize the completion structure on probe and reinitialize when needed. This also fixes a race condition during kdump where the driver can attempt to access the completion struct before it is initialized: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000081acbe0 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1 NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900 REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006 CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58 GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4 GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28 GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100 GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006 GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000 GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003 GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58 NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100 LR [c0000000081ad964] complete+0x64/0xa0 Call Trace: [c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable) [c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0 [c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic] [c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic] [c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0 [c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400 [c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0 [c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210 [c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24 [c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130 [c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120 Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04Merge tag 'pm-5.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix up the intel_pstate driver after recent changes to prevent it from printing pointless messages and update the turbostat utility (mostly fixes and new hardware support). Specifics: - Make intel_pstate only load on Intel processors and prevent it from printing pointless failure messages (Borislav Petkov). - Update the turbostat utility: * Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava). * Support for AMD Fam 17h (Zen) RAPL and package power (Calvin Walton). * Support for Intel Icelake and for systems with more than one die per package (Len Brown). * Cleanups (Len Brown)" * tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq/intel_pstate: Load only on Intel hardware tools/power turbostat: update version number tools/power turbostat: Warn on bad ACPI LPIT data tools/power turbostat: Add checks for failure of fgets() and fscanf() tools/power turbostat: Also read package power on AMD F17h (Zen) tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL tools/power turbostat: Do not display an error on systems without a cpufreq driver tools/power turbostat: Add Die column tools/power turbostat: Add Icelake support tools/power turbostat: Cleanup CNL-specific code tools/power turbostat: Cleanup CC3-skip code tools/power turbostat: Restore ability to execute in topology-order
2019-04-04Merge tag 'acpi-5.1-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent stale GPE events from triggering spurious system wakeups from suspend-to-idle (Furquan Shaikh)" * tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Clear status of GPEs before enabling them
2019-04-05Merge tag 'drm-intel-fixes-2019-04-04' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only one fix for DSC (backoff after drm_modeset_lock deadlock) and GVT's fixes including vGPU display plane size calculation, shadow mm pin count, error recovery path for workload create and one kerneldoc fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190404161116.GA14522@intel.com
2019-04-04Merge tag 'mfd-fixes-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd fixes from Lee Jones: - Fix failed reads due to enabled IRQs when suspended; twl-core - Fix driver registration when using DT; sprd-sc27xx-spi - Fix `make allyesconfig` on x86_64; SUN6I_PRCM * tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: sun6i-prcm: Allow to compile with COMPILE_TEST mfd: sc27xx: Use SoC compatible string for PMIC devices mfd: twl-core: Disable IRQ while suspended
2019-04-05Merge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 5.1: - Fix for pcie dpm - Powerplay fixes for vega20 - Fix vbios display on reboot if driver display state is retained - Gfx9 resume robustness fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190404042939.3386-1-alexander.deucher@amd.com
2019-04-04libcxgb: fix incorrect ppmax calculationVarun Prakash
BITS_TO_LONGS() uses DIV_ROUND_UP() because of this ppmax value can be greater than available per cpu page pods. This patch removes BITS_TO_LONGS() to fix this issue. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-05mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_bufferLiu Jian
In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Yi Huaijie <yihuaijie@huawei.com> Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Tokunori Ikegami <ikegami_to@yahoo.co.jp> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-04-04Merge branch 'acpica' into acpiRafael J. Wysocki
* acpica: ACPICA: Clear status of GPEs before enabling them
2019-04-04dm: disable DISCARD if the underlying storage no longer supports itMike Snitzer
Storage devices which report supporting discard commands like WRITE_SAME_16 with unmap, but reject discard commands sent to the storage device. This is a clear storage firmware bug but it doesn't change the fact that should a program cause discards to be sent to a multipath device layered on this buggy storage, all paths can end up failed at the same time from the discards, causing possible I/O loss. The first discard to a path will fail with Illegal Request, Invalid field in cdb, e.g.: kernel: sd 8:0:8:19: [sdfn] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE kernel: sd 8:0:8:19: [sdfn] tag#0 Sense Key : Illegal Request [current] kernel: sd 8:0:8:19: [sdfn] tag#0 Add. Sense: Invalid field in cdb kernel: sd 8:0:8:19: [sdfn] tag#0 CDB: Write same(16) 93 08 00 00 00 00 00 a0 08 00 00 00 80 00 00 00 kernel: blk_update_request: critical target error, dev sdfn, sector 10487808 The SCSI layer converts this to the BLK_STS_TARGET error number, the sd device disables its support for discard on this path, and because of the BLK_STS_TARGET error multipath fails the discard without failing any path or retrying down a different path. But subsequent discards can cause path failures. Any discards sent to the path which already failed a discard ends up failing with EIO from blk_cloned_rq_check_limits with an "over max size limit" error since the discard limit was set to 0 by the sd driver for the path. As the error is EIO, this now fails the path and multipath tries to send the discard down the next path. This cycle continues as discards are sent until all paths fail. Fix this by training DM core to disable DISCARD if the underlying storage already did so. Also, fix branching in dm_done() and clone_endio() to reflect the mutually exclussive nature of the IO operations in question. Cc: stable@vger.kernel.org Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-04net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stopLorenzo Bianconi
When a bpf program is uploaded, the driver computes the number of xdp tx queues resulting in the allocation of additional qsets. Starting from commit '2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them")' the driver runs link state polling for each VF resulting in the following NULL pointer dereference: [ 56.169256] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 56.178032] Mem abort info: [ 56.180834] ESR = 0x96000005 [ 56.183877] Exception class = DABT (current EL), IL = 32 bits [ 56.189792] SET = 0, FnV = 0 [ 56.192834] EA = 0, S1PTW = 0 [ 56.195963] Data abort info: [ 56.198831] ISV = 0, ISS = 0x00000005 [ 56.202662] CM = 0, WnR = 0 [ 56.205619] user pgtable: 64k pages, 48-bit VAs, pgdp = 0000000021f0c7a0 [ 56.212315] [0000000000000020] pgd=0000000000000000, pud=0000000000000000 [ 56.219094] Internal error: Oops: 96000005 [#1] SMP [ 56.260459] CPU: 39 PID: 2034 Comm: ip Not tainted 5.1.0-rc3+ #3 [ 56.266452] Hardware name: GIGABYTE R120-T33/MT30-GS1, BIOS T49 02/02/2018 [ 56.273315] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 56.278098] pc : __ll_sc___cmpxchg_case_acq_64+0x4/0x20 [ 56.283312] lr : mutex_lock+0x2c/0x50 [ 56.286962] sp : ffff0000219af1b0 [ 56.290264] x29: ffff0000219af1b0 x28: ffff800f64de49a0 [ 56.295565] x27: 0000000000000000 x26: 0000000000000015 [ 56.300865] x25: 0000000000000000 x24: 0000000000000000 [ 56.306165] x23: 0000000000000000 x22: ffff000011117000 [ 56.311465] x21: ffff800f64dfc080 x20: 0000000000000020 [ 56.316766] x19: 0000000000000020 x18: 0000000000000001 [ 56.322066] x17: 0000000000000000 x16: ffff800f2e077080 [ 56.327367] x15: 0000000000000004 x14: 0000000000000000 [ 56.332667] x13: ffff000010964438 x12: 0000000000000002 [ 56.337967] x11: 0000000000000000 x10: 0000000000000c70 [ 56.343268] x9 : ffff0000219af120 x8 : ffff800f2e077d50 [ 56.348568] x7 : 0000000000000027 x6 : 000000062a9d6a84 [ 56.353869] x5 : 0000000000000000 x4 : ffff800f2e077480 [ 56.359169] x3 : 0000000000000008 x2 : ffff800f2e077080 [ 56.364469] x1 : 0000000000000000 x0 : 0000000000000020 [ 56.369770] Process ip (pid: 2034, stack limit = 0x00000000c862da3a) [ 56.376110] Call trace: [ 56.378546] __ll_sc___cmpxchg_case_acq_64+0x4/0x20 [ 56.383414] drain_workqueue+0x34/0x198 [ 56.387247] nicvf_open+0x48/0x9e8 [nicvf] [ 56.391334] nicvf_open+0x898/0x9e8 [nicvf] [ 56.395507] nicvf_xdp+0x1bc/0x238 [nicvf] [ 56.399595] dev_xdp_install+0x68/0x90 [ 56.403333] dev_change_xdp_fd+0xc8/0x240 [ 56.407333] do_setlink+0x8e0/0xbe8 [ 56.410810] __rtnl_newlink+0x5b8/0x6d8 [ 56.414634] rtnl_newlink+0x54/0x80 [ 56.418112] rtnetlink_rcv_msg+0x22c/0x2f8 [ 56.422199] netlink_rcv_skb+0x60/0x120 [ 56.426023] rtnetlink_rcv+0x28/0x38 [ 56.429587] netlink_unicast+0x1c8/0x258 [ 56.433498] netlink_sendmsg+0x1b4/0x350 [ 56.437410] sock_sendmsg+0x4c/0x68 [ 56.440887] ___sys_sendmsg+0x240/0x280 [ 56.444711] __sys_sendmsg+0x68/0xb0 [ 56.448275] __arm64_sys_sendmsg+0x2c/0x38 [ 56.452361] el0_svc_handler+0x9c/0x128 [ 56.456186] el0_svc+0x8/0xc [ 56.459056] Code: 35ffff91 2a1003e0 d65f03c0 f9800011 (c85ffc10) [ 56.465166] ---[ end trace 4a57fdc27b0a572c ]--- [ 56.469772] Kernel panic - not syncing: Fatal exception Fix it by checking nicvf_rx_mode_wq pointer in nicvf_open and nicvf_stop Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them") Fixes: 2c632ad8bc74 ("net: thunderx: move link state polling function to VF") Reported-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: hns: Fix sparse: some warnings in HNS driversYonglong Liu
There are some sparse warnings in the HNS drivers: warning: incorrect type in assignment (different address spaces) expected void [noderef] <asn:2> *io_base got void *vaddr warning: cast removes address space '<asn:2>' of expression [...] Add __iomem and change all the u8 __iomem to void __iomem to fix these kind of warnings. warning: incorrect type in argument 1 (different address spaces) expected void [noderef] <asn:2> *base got unsigned char [usertype] *base_addr warning: cast to restricted __le16 warning: incorrect type in assignment (different base types) expected unsigned int [usertype] tbl_tcam_data_high got restricted __le32 [usertype] warning: cast to restricted __le32 [...] These variables used u32/u16 as their type, and finally as a parameter of writel(), writel() will do the cpu_to_le32 coversion so remove the little endian covert code to fix these kind of warnings. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: hns: Fix WARNING when remove HNS driver with SMMU enabledYonglong Liu
When enable SMMU, remove HNS driver will cause a WARNING: [ 141.924177] WARNING: CPU: 36 PID: 2708 at drivers/iommu/dma-iommu.c:443 __iommu_dma_unmap+0xc0/0xc8 [ 141.954673] Modules linked in: hns_enet_drv(-) [ 141.963615] CPU: 36 PID: 2708 Comm: rmmod Tainted: G W 5.0.0-rc1-28723-gb729c57de95c-dirty #32 [ 141.983593] Hardware name: Huawei D05/D05, BIOS Hisilicon D05 UEFI Nemo 1.8 RC0 08/31/2017 [ 142.000244] pstate: 60000005 (nZCv daif -PAN -UAO) [ 142.009886] pc : __iommu_dma_unmap+0xc0/0xc8 [ 142.018476] lr : __iommu_dma_unmap+0xc0/0xc8 [ 142.027066] sp : ffff000013533b90 [ 142.033728] x29: ffff000013533b90 x28: ffff8013e6983600 [ 142.044420] x27: 0000000000000000 x26: 0000000000000000 [ 142.055113] x25: 0000000056000000 x24: 0000000000000015 [ 142.065806] x23: 0000000000000028 x22: ffff8013e66eee68 [ 142.076499] x21: ffff8013db919800 x20: 0000ffffefbff000 [ 142.087192] x19: 0000000000001000 x18: 0000000000000007 [ 142.097885] x17: 000000000000000e x16: 0000000000000001 [ 142.108578] x15: 0000000000000019 x14: 363139343a70616d [ 142.119270] x13: 6e75656761705f67 x12: 0000000000000000 [ 142.129963] x11: 00000000ffffffff x10: 0000000000000006 [ 142.140656] x9 : 1346c1aa88093500 x8 : ffff0000114de4e0 [ 142.151349] x7 : 6662666578303d72 x6 : ffff0000105ffec8 [ 142.162042] x5 : 0000000000000000 x4 : 0000000000000000 [ 142.172734] x3 : 00000000ffffffff x2 : ffff0000114de500 [ 142.183427] x1 : 0000000000000000 x0 : 0000000000000035 [ 142.194120] Call trace: [ 142.199030] __iommu_dma_unmap+0xc0/0xc8 [ 142.206920] iommu_dma_unmap_page+0x20/0x28 [ 142.215335] __iommu_unmap_page+0x40/0x60 [ 142.223399] hnae_unmap_buffer+0x110/0x134 [ 142.231639] hnae_free_desc+0x6c/0x10c [ 142.239177] hnae_fini_ring+0x14/0x34 [ 142.246540] hnae_fini_queue+0x2c/0x40 [ 142.254080] hnae_put_handle+0x38/0xcc [ 142.261619] hns_nic_dev_remove+0x54/0xfc [hns_enet_drv] [ 142.272312] platform_drv_remove+0x24/0x64 [ 142.280552] device_release_driver_internal+0x17c/0x20c [ 142.291070] driver_detach+0x4c/0x90 [ 142.298259] bus_remove_driver+0x5c/0xd8 [ 142.306148] driver_unregister+0x2c/0x54 [ 142.314037] platform_driver_unregister+0x10/0x18 [ 142.323505] hns_nic_dev_driver_exit+0x14/0xf0c [hns_enet_drv] [ 142.335248] __arm64_sys_delete_module+0x214/0x25c [ 142.344891] el0_svc_common+0xb0/0x10c [ 142.352430] el0_svc_handler+0x24/0x80 [ 142.359968] el0_svc+0x8/0x7c0 [ 142.366104] ---[ end trace 60ad1cd58e63c407 ]--- The tx ring buffer map when xmit and unmap when xmit done. So in hnae_init_ring() did not map tx ring buffer, but in hnae_fini_ring() have a unmap operation for tx ring buffer, which is already unmapped when xmit done, than cause this WARNING. The hnae_alloc_buffers() is called in hnae_init_ring(), so the hnae_free_buffers() should be in hnae_fini_ring(), not in hnae_free_desc(). In hnae_fini_ring(), adds a check is_rx_ring() as in hnae_init_ring(). When the ring buffer is tx ring, adds a piece of code to ensure that the tx ring is unmap. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: hns: fix ICMP6 neighbor solicitation messages discard problemYonglong Liu
ICMP6 neighbor solicitation messages will be discard by the Hip06 chips, because of not setting forwarding pool. Enable promisc mode has the same problem. This patch fix the wrong forwarding table configs for the multicast vague matching when enable promisc mode, and add forwarding pool for the forwarding table. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: hns: Fix probabilistic memory overwrite when HNS driver initializedYonglong Liu
When reboot the system again and again, may cause a memory overwrite. [ 15.638922] systemd[1]: Reached target Swap. [ 15.667561] tun: Universal TUN/TAP device driver, 1.6 [ 15.676756] Bridge firewalling registered [ 17.344135] Unable to handle kernel paging request at virtual address 0000000200000040 [ 17.352179] Mem abort info: [ 17.355007] ESR = 0x96000004 [ 17.358105] Exception class = DABT (current EL), IL = 32 bits [ 17.364112] SET = 0, FnV = 0 [ 17.367209] EA = 0, S1PTW = 0 [ 17.370393] Data abort info: [ 17.373315] ISV = 0, ISS = 0x00000004 [ 17.377206] CM = 0, WnR = 0 [ 17.380214] user pgtable: 4k pages, 48-bit VAs, pgdp = (____ptrval____) [ 17.386926] [0000000200000040] pgd=0000000000000000 [ 17.391878] Internal error: Oops: 96000004 [#1] SMP [ 17.396824] CPU: 23 PID: 95 Comm: kworker/u130:0 Tainted: G E 4.19.25-1.2.78.aarch64 #1 [ 17.414175] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.54 08/16/2018 [ 17.425615] Workqueue: events_unbound async_run_entry_fn [ 17.435151] pstate: 00000005 (nzcv daif -PAN -UAO) [ 17.444139] pc : __mutex_lock.isra.1+0x74/0x540 [ 17.453002] lr : __mutex_lock.isra.1+0x3c/0x540 [ 17.461701] sp : ffff000100d9bb60 [ 17.469146] x29: ffff000100d9bb60 x28: 0000000000000000 [ 17.478547] x27: 0000000000000000 x26: ffff802fb8945000 [ 17.488063] x25: 0000000000000000 x24: ffff802fa32081a8 [ 17.497381] x23: 0000000000000002 x22: ffff801fa2b15220 [ 17.506701] x21: ffff000009809000 x20: ffff802fa23a0888 [ 17.515980] x19: ffff801fa2b15220 x18: 0000000000000000 [ 17.525272] x17: 0000000200000000 x16: 0000000200000000 [ 17.534511] x15: 0000000000000000 x14: 0000000000000000 [ 17.543652] x13: ffff000008d95db8 x12: 000000000000000d [ 17.552780] x11: ffff000008d95d90 x10: 0000000000000b00 [ 17.561819] x9 : ffff000100d9bb90 x8 : ffff802fb89d6560 [ 17.570829] x7 : 0000000000000004 x6 : 00000004a1801d05 [ 17.579839] x5 : 0000000000000000 x4 : 0000000000000000 [ 17.588852] x3 : ffff802fb89d5a00 x2 : 0000000000000000 [ 17.597734] x1 : 0000000200000000 x0 : 0000000200000000 [ 17.606631] Process kworker/u130:0 (pid: 95, stack limit = 0x(____ptrval____)) [ 17.617438] Call trace: [ 17.623349] __mutex_lock.isra.1+0x74/0x540 [ 17.630927] __mutex_lock_slowpath+0x24/0x30 [ 17.638602] mutex_lock+0x50/0x60 [ 17.645295] drain_workqueue+0x34/0x198 [ 17.652623] __sas_drain_work+0x7c/0x168 [ 17.659903] sas_drain_work+0x60/0x68 [ 17.666947] hisi_sas_scan_finished+0x30/0x40 [hisi_sas_main] [ 17.676129] do_scsi_scan_host+0x70/0xb0 [ 17.683534] do_scan_async+0x20/0x228 [ 17.690586] async_run_entry_fn+0x4c/0x1d0 [ 17.697997] process_one_work+0x1b4/0x3f8 [ 17.705296] worker_thread+0x54/0x470 Every time the call trace is not the same, but the overwrite address is always the same: Unable to handle kernel paging request at virtual address 0000000200000040 The root cause is, when write the reg XGMAC_MAC_TX_LF_RF_CONTROL_REG, didn't use the io_base offset. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: hns: Use NAPI_POLL_WEIGHT for hns driverYonglong Liu
When the HNS driver loaded, always have an error print: "netif_napi_add() called with weight 256" This is because the kernel checks the NAPI polling weights requested by drivers and it prints an error message if a driver requests a weight bigger than 64. So use NAPI_POLL_WEIGHT to fix it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>