aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-13selinux: revert 102aefdda4d8275ce7d7100bc16c88c74272b260Paul Moore
Revert "selinux: consider filesystem subtype in policies" This reverts commit 102aefdda4d8275ce7d7100bc16c88c74272b260. Explanation from Eric Paris: SELinux policy can specify if it should use a filesystem's xattrs or not. In current policy we have a specification that fuse should not use xattrs but fuse.glusterfs should use xattrs. This patch has a bug in which non-glusterfs filesystems would match the rule saying fuse.glusterfs should use xattrs. If both fuse and the particular filesystem in question are not written to handle xattr calls during the mount command, they will deadlock. I have fixed the bug to do proper matching, however I believe a revert is still the correct solution. The reason I believe that is because the code still does not work. The s_subtype is not set until after the SELinux hook which attempts to match on the ".gluster" portion of the rule. So we cannot match on the rule in question. The code is useless. Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-12-11selinux: fix broken peer recv checkChad Hanson
Fix a broken networking check. Return an error if peer recv fails. If secmark is active and the packet recv succeeds the peer recv error is ignored. Signed-off-by: Chad Hanson <chanson@trustedcs.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-12-10selinux: process labeled IPsec TCP SYN-ACK packets properly in ↵Paul Moore
selinux_ip_postroute() Due to difficulty in arriving at the proper security label for TCP SYN-ACK packets in selinux_ip_postroute(), we need to check packets while/before they are undergoing XFRM transforms instead of waiting until afterwards so that we can determine the correct security label. Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu> Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-12-09selinux: look for IPsec labels on both inbound and outbound packetsPaul Moore
Previously selinux_skb_peerlbl_sid() would only check for labeled IPsec security labels on inbound packets, this patch enables it to check both inbound and outbound traffic for labeled IPsec security labels. Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu> Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-12-04selinux: pull address family directly from the request_sock structPaul Moore
We don't need to inspect the packet to determine if the packet is an IPv4 packet arriving on an IPv6 socket when we can query the request_sock directly. Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-12-04selinux: ensure that the cached NetLabel secattr matches the desired SIDPaul Moore
In selinux_netlbl_skbuff_setsid() we leverage a cached NetLabel secattr whenever possible. However, we never check to ensure that the desired SID matches the cached NetLabel secattr. This patch checks the SID against the secattr before use and only uses the cached secattr when the SID values match. Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-12-04selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()Paul Moore
In selinux_ip_postroute() we perform access checks based on the packet's security label. For locally generated traffic we get the packet's security label from the associated socket; this works in all cases except for TCP SYN-ACK packets. In the case of SYN-ACK packet's the correct security label is stored in the connection's request_sock, not the server's socket. Unfortunately, at the point in time when selinux_ip_postroute() is called we can't query the request_sock directly, we need to recreate the label using the same logic that originally labeled the associated request_sock. See the inline comments for more explanation. Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu> Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu> Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-12-04selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()Paul Moore
In selinux_ip_output() we always label packets based on the parent socket. While this approach works in almost all cases, it doesn't work in the case of TCP SYN-ACK packets when the correct label is not the label of the parent socket, but rather the label of the larval socket represented by the request_sock struct. Unfortunately, since the request_sock isn't queued on the parent socket until *after* the SYN-ACK packet is sent, we can't lookup the request_sock to determine the correct label for the packet; at this point in time the best we can do is simply pass/NF_ACCEPT the packet. It must be said that simply passing the packet without any explicit labeling action, while far from ideal, is not terrible as the SYN-ACK packet will inherit any IP option based labeling from the initial connection request so the label *should* be correct and all our access controls remain in place so we shouldn't have to worry about information leaks. Reported-by: Janak Desai <Janak.Desai@gtri.gatech.edu> Tested-by: Janak Desai <Janak.Desai@gtri.gatech.edu> Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-11-25selinux: fix possible memory leakGeyslan G. Bem
Free 'ctx_str' when necessary. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-11-19SELinux: security_load_policy: Silence frame-larger-than warningTim Gardner
Dynamically allocate a couple of the larger stack variables in order to reduce the stack footprint below 1024. gcc-4.8 security/selinux/ss/services.c: In function 'security_load_policy': security/selinux/ss/services.c:1964:1: warning: the frame size of 1104 bytes is larger than 1024 bytes [-Wframe-larger-than=] } Also silence a couple of checkpatch warnings at the same time. WARNING: sizeof policydb should be sizeof(policydb) + memcpy(oldpolicydb, &policydb, sizeof policydb); WARNING: sizeof policydb should be sizeof(policydb) + memcpy(&policydb, newpolicydb, sizeof policydb); Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <james.l.morris@oracle.com> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-11-19SELinux: Update policy version to support constraints infoRichard Haines
Update the policy version (POLICYDB_VERSION_CONSTRAINT_NAMES) to allow holding of policy source info for constraints. Signed-off-by: Richard Haines <richard_c_haines@btinternet.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com>
2013-11-08Merge tag 'v3.12'Paul Moore
Linux 3.12
2013-11-03Linux 3.12v3.12Linus Torvalds
2013-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS fixes from Ralf Baechle: "Three fixes across arch/mips with the most complex one being the GIC interrupt fix - at nine lines still not monster. I'm confident this are the final MIPS patches even if there should go for an rc8" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: ralink: fix return value check in rt_timer_probe() MIPS: malta: Fix GIC interrupt offsets MIPS: Perf: Fix 74K cache map
2013-11-03ipc, msg: forbid negative values for "msg{max,mnb,mni}"Mathias Krause
Negative message lengths make no sense -- so don't do negative queue lenghts or identifier counts. Prevent them from getting negative. Also change the underlying data types to be unsigned to avoid hairy surprises with sign extensions in cases where those variables get evaluated in unsigned expressions with bigger data types, e.g size_t. In case a user still wants to have "unlimited" sizes she could just use INT_MAX instead. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-02Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull ARM kallsyms fix from Rusty Russell: "Last minute perf unbreakage for ARM modules; spent a day in linux-next" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: scripts/kallsyms: filter symbols not in kernel address space
2013-11-02ARC: Incorrect mm reference used in vmalloc fault handlerVineet Gupta
A vmalloc fault needs to sync up PGD/PTE entry from init_mm to current task's "active_mm". ARC vmalloc fault handler however was using mm. A vmalloc fault for non user task context (actually pre-userland, from init thread's open for /dev/console) caused the handler to deref NULL mm (for mm->pgd) The reasons it worked so far is amazing: 1. By default (!SMP), vmalloc fault handler uses a cached value of PGD. In SMP that MMU register is repurposed hence need for mm pointer deref. 2. In pre-3.12 SMP kernel, the problem triggering vmalloc didn't exist in pre-userland code path - it was introduced with commit 20bafb3d23d108bc "n_tty: Move buffers into n_tty_data" Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Gilad Ben-Yossef <gilad@benyossef.com> Cc: Noam Camus <noamc@ezchip.com> Cc: stable@vger.kernel.org #3.10 and 3.11 Cc: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-02scripts/kallsyms: filter symbols not in kernel address spaceMing Lei
This patch uses CONFIG_PAGE_OFFSET to filter symbols which are not in kernel address space because these symbols are generally for generating code purpose and can't be run at kernel mode, so we needn't keep them in /proc/kallsyms. For example, on ARM there are some symbols which may be linked in relocatable code section, then perf can't parse symbols any more from /proc/kallsyms, this patch fixes the problem (introduced b9b32bf70f2fb710b07c94e13afbc729afe221da) Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Michal Marek <mmarek@suse.cz> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@vger.kernel.org
2013-11-01Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two fixes: - Fix 'NMI handler took too long to run' false positives [ Genuine NMI overhead speedups will come for v3.13, this commit only fixes a measurement bug ] - Fix perf ring-buffer missed barrier causing (rare) ring-buffer data corruption on ppc64" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix NMI measurements perf: Fix perf ring buffer memory ordering
2013-11-01Merge tag 'usb-3.12-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here is a set of patches that revert all of the changes done to the pl2303 USB serial driver in the 3.12-rc timeframe, as it turns out they break some devices that work just fine on 3.11. As it's not a good idea to break working systems, drop them all and they will be reworked for future kernel versions such that there is no breakage. I've also included a MAINTAINERS update for the USB serial subsystem and a new device id for the ftdi_sio driver as well" * tag 'usb-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: ftdi_sio: add id for Z3X Box device USB: Maintainers change for usb serial drivers Revert "USB: pl2303: restrict the divisor based baud rate encoding method to the "HX" chip type" Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method" Revert "usb: pl2303: do not round to the next nearest standard baud rate for the divisor based baud rate encoding method" Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates" Revert "usb: pl2303: move the two baud rate encoding methods to separate functions" Revert "usb: pl2303: increase the allowed baud rate range for the divisor based encoding method" Revert "usb: pl2303: also use the divisor based baud rate encoding method for baud rates < 115200 with HX chips" Revert "usb: pl2303: add two comments concerning the supported baud rates with HX chips" Revert "pl2303: simplify the else-if contruct for type_1 chips in pl2303_startup()" Revert "pl2303: improve the chip type information output on startup" Revert "pl2303: improve the chip type detection/distinction" Revert "USB: pl2303: distinguish between original and cloned HX chips"
2013-11-01Merge tag 'sound-3.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound fixes from Takashi Iwai: "The fixes for random bugs that have been reported lately in the game: a few fixes in ASoC dpam and wm_hubs bugs spotted by Coverity, a one-liner HD-audio fixup, and a fix for Oops with DPCM. They are not so critically urgent bugs, but all small and safe" * tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: fix oops in snd_pcm_info() caused by ASoC DPCM ASoC: wm_hubs: Add missing break in hp_supply_event() ALSA: hda - Add a fixup for ASUS N76VZ ASoC: dapm: Return -ENOMEM in snd_soc_dapm_new_dai_widgets() ASoC: dapm: Fix source list debugfs outputs
2013-11-01Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linuxLinus Torvalds
Pull clock subsystem fixes from Mike Turquette. * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: fixup argument order when setting VCO parameters clk: socfpga: Fix incorrect sdmmc clock name clk: armada-370: fix tclk frequencies clk: nomadik: set all timers to use 2.4 MHz TIMCLK
2013-11-01memcg: remove incorrect underflow checkGreg Thelen
When a memcg is deleted mem_cgroup_reparent_charges() moves charged memory to the parent memcg. As of v3.11-9444-g3ea67d0 "memcg: add per cgroup writeback pages accounting" there's bad pointer read. The goal was to check for counter underflow. The counter is a per cpu counter and there are two problems with the code: (1) per cpu access function isn't used, instead a naked pointer is used which easily causes oops. (2) the check doesn't sum all cpus Test: $ cd /sys/fs/cgroup/memory $ mkdir x $ echo 3 > /proc/sys/vm/drop_caches $ (echo $BASHPID >> x/tasks && exec cat) & [1] 7154 $ grep ^mapped x/memory.stat mapped_file 53248 $ echo 7154 > tasks $ rmdir x <OOPS> The fix is to remove the check. It's currently dangerous and isn't worth fixing it to use something expensive, such as percpu_counter_sum(), for each reparented page. __this_cpu_read() isn't enough to fix this because there's no guarantees of the current cpus count. The only guarantees is that the sum of all per-cpu counter is >= nr_pages. Fixes: 3ea67d06e467 ("memcg: add per cgroup writeback pages accounting") Reported-and-tested-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: Greg Thelen <gthelen@google.com> Reviewed-by: Sha Zhengju <handai.szj@taobao.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-01USB: serial: ftdi_sio: add id for Z3X Box deviceАлексей Крамаренко
Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by: Alexey E. Kramarenko <alexeyk13@yandex.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01USB: Maintainers change for usb serial driversGreg KH
Johan has been conned^Wgracious in accepting the maintainership of the USB serial drivers, especially as he's been doing all of the real work for the past few years. At the same time, remove a bunch of old entries for USB serial drivers that don't make sense anymore, given that the developers are no longer around, and individual driver maintainerships for tiny things like this is pretty pointless. Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "USB: pl2303: restrict the divisor based baud rate encoding method to ↵Greg Kroah-Hartman
the "HX" chip type" This reverts commit b8bdad608213caffa081a97d2e937e5fe08c4046. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: fix+improve the divsor based baud rate encoding method"Greg Kroah-Hartman
This reverts commit 57ce61aad748ceaa08c859da04043ad7dae7c15e. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: do not round to the next nearest standard baud rate for ↵Greg Kroah-Hartman
the divisor based baud rate encoding method" This reverts commit 75417d9f99f89ab241de69d7db15af5842b488c4. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: remove 500000 baud from the list of standard baud rates"Greg Kroah-Hartman
This reverts commit b9208c721ce736125fe58d398319513a27850fd8. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: move the two baud rate encoding methods to separate ↵Greg Kroah-Hartman
functions" This reverts commit e917ba01d69ad705a4cd6a6c77538f55d84f5907. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: increase the allowed baud rate range for the divisor ↵Greg Kroah-Hartman
based encoding method" This reverts commit b5c16c6a031c52cc4b7dda6c3de46462fbc92eab. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: also use the divisor based baud rate encoding method ↵Greg Kroah-Hartman
for baud rates < 115200 with HX chips" This reverts commit 61fa8d694b8547894b57ea0d99d0120a58f6ebf8. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "usb: pl2303: add two comments concerning the supported baud rates ↵Greg Kroah-Hartman
with HX chips" This reverts commit c23bda365dfbf56aa4d6d4a97f83136c36050e01. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "pl2303: simplify the else-if contruct for type_1 chips in ↵Greg Kroah-Hartman
pl2303_startup()" This reverts commit 73b583af597542329e6adae44524da6f27afed62. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "pl2303: improve the chip type information output on startup"Greg Kroah-Hartman
This reverts commit a77a8c23e4db9fb1f776147eda0d85117359c700. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "pl2303: improve the chip type detection/distinction"Greg Kroah-Hartman
This reverts commit 034d1527adebd302115c87ef343497a889638275. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-01Revert "USB: pl2303: distinguish between original and cloned HX chips"Greg Kroah-Hartman
This reverts commit 7d26a78f62ff4fb08bc5ba740a8af4aa7ac67da4. Revert all of the pl2303 changes that went into 3.12-rc1 and -rc2 as they cause regressions on some versions of the chip. This will all be revisited for later kernel versions when we can figure out how to handle this in a way that does not break working devices. Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-31Merge branch 'akpm' (fixes from Andrew Morton)Linus Torvalds
Merge four more fixes from Andrew Morton. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: lib/scatterlist.c: don't flush_kernel_dcache_page on slab page mm: memcg: fix test for child groups mm: memcg: lockdep annotation for memcg OOM lock mm: memcg: use proper memcg in limit bypass
2013-10-31lib/scatterlist.c: don't flush_kernel_dcache_page on slab pageMing Lei
Commit b1adaf65ba03 ("[SCSI] block: add sg buffer copy helper functions") introduces two sg buffer copy helpers, and calls flush_kernel_dcache_page() on pages in SG list after these pages are written to. Unfortunately, the commit may introduce a potential bug: - Before sending some SCSI commands, kmalloc() buffer may be passed to block layper, so flush_kernel_dcache_page() can see a slab page finally - According to cachetlb.txt, flush_kernel_dcache_page() is only called on "a user page", which surely can't be a slab page. - ARCH's implementation of flush_kernel_dcache_page() may use page mapping information to do optimization so page_mapping() will see the slab page, then VM_BUG_ON() is triggered. Aaro Koskinen reported the bug on ARM/kirkwood when DEBUG_VM is enabled, and this patch fixes the bug by adding test of '!PageSlab(miter->page)' before calling flush_kernel_dcache_page(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <tj@kernel.org> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> [3.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-31mm: memcg: fix test for child groupsJohannes Weiner
When memcg code needs to know whether any given memcg has children, it uses the cgroup child iteration primitives and returns true/false depending on whether the iteration loop is executed at least once or not. Because a cgroup's list of children is RCU protected, these primitives require the RCU read-lock to be held, which is not the case for all memcg callers. This results in the following splat when e.g. enabling hierarchy mode: WARNING: CPU: 3 PID: 1 at kernel/cgroup.c:3043 css_next_child+0xa3/0x160() CPU: 3 PID: 1 Comm: systemd Not tainted 3.12.0-rc5-00117-g83f11a9-dirty #18 Hardware name: LENOVO 3680B56/3680B56, BIOS 6QET69WW (1.39 ) 04/26/2012 Call Trace: dump_stack+0x54/0x74 warn_slowpath_common+0x78/0xa0 warn_slowpath_null+0x1a/0x20 css_next_child+0xa3/0x160 mem_cgroup_hierarchy_write+0x5b/0xa0 cgroup_file_write+0x108/0x2a0 vfs_write+0xbd/0x1e0 SyS_write+0x4c/0xa0 system_call_fastpath+0x16/0x1b In the memcg case, we only care about children when we are attempting to modify inheritable attributes interactively. Racing with deletion could mean a spurious -EBUSY, no problem. Racing with addition is handled just fine as well through the memcg_create_mutex: if the child group is not on the list after the mutex is acquired, it won't be initialized from the parent's attributes until after the unlock. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-31mm: memcg: lockdep annotation for memcg OOM lockJohannes Weiner
The memcg OOM lock is a mutex-type lock that is open-coded due to memcg's special needs. Add annotations for lockdep coverage. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-31mm: memcg: use proper memcg in limit bypassJohannes Weiner
Commit 84235de394d9 ("fs: buffer: move allocation failure loop into the allocator") allowed __GFP_NOFAIL allocations to bypass the limit if they fail to reclaim enough memory for the charge. But because the main test case was on a 3.2-based system, the patch missed the fact that on newer kernels the charge function needs to return root_mem_cgroup when bypassing the limit, and not NULL. This will corrupt whatever memory is at NULL + percpu pointer offset. Fix this quickly before problems are reported. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-31vfs: decrapify dput(), fix cache behavior under normal loadLinus Torvalds
We do not want to dirty the dentry->d_flags cacheline in dput() just to set the DCACHE_REFERENCED flag when it is already set in the common case anyway. This way the first cacheline of the dentry (which contains the RCU lookup information etc) can stay shared among multiple CPU's. This finishes off some of the details of all the scalability patches merged during the merge window. Also don't mark dentry_kill() for inlining, since it's the uncommon path and inlining it just makes the common path slower due to extra function entry/exit overhead. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-31i915: fix compiler warningLinus Torvalds
The last i915 drm update brought with it this annoying warning drivers/gpu/drm/i915/intel_crt.c: In function ‘intel_crt_get_config’: drivers/gpu/drm/i915/intel_crt.c:110:21: warning: unused variable ‘dev’ [-Wunused-variable] struct drm_device *dev = encoder->base.dev; ^ introduced by commit 7195a50b5c7e ("drm/i915: Add HSW CRT output readout support"). Remove the offending pointless variable. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-31Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull NUMA balancing memory corruption fixes from Ingo Molnar: "So these fixes are definitely not something I'd like to sit on, but as I said to Mel at the KS the timing is quite tight, with Linus planning v3.12-final within a week. Fedora-19 is affected: comet:~> grep NUMA_BALANCING /boot/config-3.11.3-201.fc19.x86_64 CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y CONFIG_NUMA_BALANCING=y AFAICS Ubuntu will be affected as well, once it updates the kernel: hubble:~> grep NUMA_BALANCING /boot/config-3.8.0-32-generic CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y CONFIG_NUMA_BALANCING=y These 6 commits are a minimalized set of cherry-picks needed to fix the memory corruption bugs. All commits are fixes, except "mm: numa: Sanitize task_numa_fault() callsites" which is a cleanup that made two followup fixes simpler. I've done targeted testing with just this SHA1 to try to make sure there are no cherry-picking artifacts. The original non-cherry-picked set of fixes were exposed to linux-next for a couple of weeks" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm: Account for a THP NUMA hinting update as one PTE update mm: Close races between THP migration and PMD numa clearing mm: numa: Sanitize task_numa_fault() callsites mm: Prevent parallel splits during THP migration mm: Wait for THP migrations to complete during NUMA hinting faults mm: numa: Do not account for a hinting fault if we raced
2013-10-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A bit later than I would want, but the changes are very minor - a few new device IDs for new hardware in existing drivers, fix for battery in Wacom devices not be considered system battery and cause emergency hibernations, and a couple of other bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - add support for model found on Dell XT2 Input: wacom - add support for ISDv4 0x10E sensor Input: wacom - add support for ISDv4 0x10F sensor Input: wacom - export battery scope Input: cm109 - convert high volume dev_err() to dev_err_ratelimited() Input: move name/timer init to input_alloc_dev() Input: i8042 - i8042_flush fix for a full 8042 buffer Input: pxa27x_keypad - fix NULL pointer dereference
2013-10-31Merge tag 'pm+acpi-3.12-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael J Wysocki: "Last-minute ACPI and power management fixes for 3.12 - Revert epoll and select commits related to the freezer, introduced during the 3.11 cycle, that cause mysterious user space breakage to occur during resume from suspend to RAM for multiple users of 32-bit x86 systems. Material for 3.11.y stable kernels. - Revert a recent ACPI-based PCI hotplug (ACPIPHP) commit that was part of boot problem fixes for one machine, but turns out to cause issues with hotplug on Thunderbolt chains with multiple devices. It also turns out to be unnecessary after another fix in the same area that went in later. From Mika Westerberg" * tag 'pm+acpi-3.12-late' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies" Revert "select: use freezable blocking call" Revert "epoll: use freezable blocking call"
2013-10-31ALSA: fix oops in snd_pcm_info() caused by ASoC DPCMRussell King
Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = d5300000 [00000008] *pgd=0d265831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM CPU: 0 PID: 2295 Comm: vlc Not tainted 3.11.0+ #755 task: dee74800 ti: e213c000 task.ti: e213c000 PC is at snd_pcm_info+0xc8/0xd8 LR is at 0x30232065 pc : [<c031b52c>] lr : [<30232065>] psr: a0070013 sp : e213dea8 ip : d81cb0d0 fp : c05f7678 r10: c05f7770 r9 : fffffdfd r8 : 00000000 r7 : d8a968a8 r6 : d8a96800 r5 : d8a96200 r4 : d81cb000 r3 : 00000000 r2 : d81cb000 r1 : 00000001 r0 : d8a96200 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 15300019 DAC: 00000015 Process vlc (pid: 2295, stack limit = 0xe213c248) [<c031b52c>] (snd_pcm_info) from [<c031b570>] (snd_pcm_info_user+0x34/0x9c) [<c031b570>] (snd_pcm_info_user) from [<c03164a4>] (snd_pcm_control_ioctl+0x274/0x280) [<c03164a4>] (snd_pcm_control_ioctl) from [<c0311458>] (snd_ctl_ioctl+0xc0/0x55c) [<c0311458>] (snd_ctl_ioctl) from [<c00eca84>] (do_vfs_ioctl+0x80/0x31c) [<c00eca84>] (do_vfs_ioctl) from [<c00ecd5c>] (SyS_ioctl+0x3c/0x60) [<c00ecd5c>] (SyS_ioctl) from [<c000e500>] (ret_fast_syscall+0x0/0x48) Code: e1a00005 e59530dc e3a01001 e1a02004 (e5933008) ---[ end trace cb3d9bdb8dfefb3c ]--- This is provoked when the ASoC front end is open along with its backend, (which causes the backend to have a runtime assigned to it) and then the SNDRV_CTL_IOCTL_PCM_INFO is requested for the (visible) backend device. Resolve this by ensuring that ASoC internal backend devices are not visible to userspace, just as the commentry for snd_pcm_new_internal() says it should be. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark Brown <broonie@linaro.org> Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-31MIPS: ralink: fix return value check in rt_timer_probe()Wei Yongjun
In case of error, the function devm_request_and_ioremap() returns NULL pointer not ERR_PTR(). Fix it by using devm_ioremap_resource() instead of devm_request_and_ioremap(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: John Crispin <blogic@openwrt.org> Cc: grant.likely@linaro.org Cc: rob.herring@calxeda.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6098/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-31Input: ALPS - add support for model found on Dell XT2Yunkang Tang
This patch adds support for touchpad found on Dell XT2. It's a dual device with device ID: 73, 00, 14, that comply with "ALPS_PROTO_V2". Signed-off-by: Yunkang Tang <yunkang.tang@cn.alps.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>