aboutsummaryrefslogtreecommitdiff
path: root/Documentation/sound/alsa/Bt87x.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/alsa/Bt87x.txt')
-rw-r--r--Documentation/sound/alsa/Bt87x.txt78
1 files changed, 78 insertions, 0 deletions
diff --git a/Documentation/sound/alsa/Bt87x.txt b/Documentation/sound/alsa/Bt87x.txt
new file mode 100644
index 000000000000..11edb2fd2a5a
--- /dev/null
+++ b/Documentation/sound/alsa/Bt87x.txt
@@ -0,0 +1,78 @@
+Intro
+=====
+
+You might have noticed that the bt878 grabber cards have actually
+_two_ PCI functions:
+
+$ lspci
+[ ... ]
+00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
+00:0a.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
+[ ... ]
+
+The first does video, it is backward compatible to the bt848. The second
+does audio. snd-bt87x is a driver for the second function. It's a sound
+driver which can be used for recording sound (and _only_ recording, no
+playback). As most TV cards come with a short cable which can be plugged
+into your sound card's line-in you probably don't need this driver if all
+you want to do is just watching TV...
+
+Some cards do not bother to connect anything to the audio input pins of
+the chip, and some other cards use the audio function to transport MPEG
+video data, so it's quite possible that audio recording may not work
+with your card.
+
+
+Driver Status
+=============
+
+The driver is now stable. However, it doesn't know about many TV cards,
+and it refuses to load for cards it doesn't know.
+
+If the driver complains ("Unknown TV card found, the audio driver will
+not load"), you can specify the load_all=1 option to force the driver to
+try to use the audio capture function of your card. If the frequency of
+recorded data is not right, try to specify the digital_rate option with
+other values than the default 32000 (often it's 44100 or 64000).
+
+If you have an unknown card, please mail the ID and board name to
+<alsa-devel@lists.sf.net>, regardless of whether audio capture works or
+not, so that future versions of this driver know about your card.
+
+
+Audio modes
+===========
+
+The chip knows two different modes (digital/analog). snd-bt87x
+registers two PCM devices, one for each mode. They cannot be used at
+the same time.
+
+
+Digital audio mode
+==================
+
+The first device (hw:X,0) gives you 16 bit stereo sound. The sample
+rate depends on the external source which feeds the Bt87x with digital
+sound via I2S interface.
+
+
+Analog audio mode (A/D)
+=======================
+
+The second device (hw:X,1) gives you 8 or 16 bit mono sound. Supported
+sample rates are between 119466 and 448000 Hz (yes, these numbers are
+that high). If you've set the CONFIG_SND_BT87X_OVERCLOCK option, the
+maximum sample rate is 1792000 Hz, but audio data becomes unusable
+beyond 896000 Hz on my card.
+
+The chip has three analog inputs. Consequently you'll get a mixer
+device to control these.
+
+
+Have fun,
+
+ Clemens
+
+
+Written by Clemens Ladisch <clemens@ladisch.de>
+big parts copied from btaudio.txt by Gerd Knorr <kraxel@bytesex.org>