aboutsummaryrefslogtreecommitdiff
path: root/sound/pci/ice1712/juli.c
diff options
context:
space:
mode:
authorPavel Hofman <dustin@seznam.cz>2008-03-20 12:10:27 +0100
committerTakashi Iwai <tiwai@suse.de>2008-04-24 12:00:29 +0200
commitd16be8ed69f3e59d36be8c422508c3a10082fdaa (patch)
tree38b4ff3d3a181a2f16b1e74669b1205dae455c89 /sound/pci/ice1712/juli.c
parentff73317ea7c648cf5f59b8bda4a810f7b5d0312c (diff)
downloadlinux-stericsson-d16be8ed69f3e59d36be8c422508c3a10082fdaa.tar.gz
[ALSA] ice1724 - Improved the Juli rate setting
* moving most of clock-specific code to card-specific routines * support for ESI Juli * to-be-researched - monitoring of analog/digital inputs Signed-off-by: Pavel Hofman <dustin@seznam.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci/ice1712/juli.c')
-rw-r--r--sound/pci/ice1712/juli.c471
1 files changed, 440 insertions, 31 deletions
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c
index 4550609b4d47..b4e0c16852a6 100644
--- a/sound/pci/ice1712/juli.c
+++ b/sound/pci/ice1712/juli.c
@@ -4,6 +4,8 @@
* Lowlevel functions for ESI Juli@ cards
*
* Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz>
+ * 2008 Pavel Hofman <dustin@seznam.cz>
+ *
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -27,11 +29,11 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <sound/core.h>
+#include <sound/tlv.h>
#include "ice1712.h"
#include "envy24ht.h"
#include "juli.h"
-
struct juli_spec {
struct ak4114 *ak4114;
unsigned int analog: 1;
@@ -44,6 +46,32 @@ struct juli_spec {
#define AK4358_ADDR 0x22 /* DAC */
/*
+ * Juli does not use the standard ICE1724 clock scheme. Juli's ice1724 chip is
+ * supplied by external clock provided by Xilinx array and MK73-1 PLL frequency
+ * multiplier. Actual frequency is set by ice1724 GPIOs hooked to the Xilinx.
+ *
+ * The clock circuitry is supplied by the two ice1724 crystals. This
+ * arrangement allows to generate independent clock signal for AK4114's input
+ * rate detection circuit. As a result, Juli, unlike most other
+ * ice1724+ak4114-based cards, detects spdif input rate correctly.
+ * This fact is applied in the driver, allowing to modify PCM stream rate
+ * parameter according to the actual input rate.
+ *
+ * Juli uses the remaining three stereo-channels of its DAC to optionally
+ * monitor analog input, digital input, and digital output. The corresponding
+ * I2S signals are routed by Xilinx, controlled by GPIOs.
+ *
+ * The master mute is implemented using output muting transistors (GPIO) in
+ * combination with smuting the DAC.
+ *
+ * The card itself has no HW master volume control, implemented using the
+ * vmaster control.
+ *
+ * TODO:
+ * researching and fixing the input monitors
+ */
+
+/*
* GPIO pins
*/
#define GPIO_FREQ_MASK (3<<0)
@@ -55,17 +83,82 @@ struct juli_spec {
#define GPIO_MULTI_2X (1<<2)
#define GPIO_MULTI_1X (2<<2) /* also external */
#define GPIO_MULTI_HALF (3<<2)
-#define GPIO_INTERNAL_CLOCK (1<<4)
+#define GPIO_INTERNAL_CLOCK (1<<4) /* 0 = external, 1 = internal */
+#define GPIO_CLOCK_MASK (1<<4)
#define GPIO_ANALOG_PRESENT (1<<5) /* RO only: 0 = present */
#define GPIO_RXMCLK_SEL (1<<7) /* must be 0 */
#define GPIO_AK5385A_CKS0 (1<<8)
-#define GPIO_AK5385A_DFS0 (1<<9) /* swapped with DFS1 according doc? */
-#define GPIO_AK5385A_DFS1 (1<<10)
+#define GPIO_AK5385A_DFS1 (1<<9)
+#define GPIO_AK5385A_DFS0 (1<<10)
#define GPIO_DIGOUT_MONITOR (1<<11) /* 1 = active */
#define GPIO_DIGIN_MONITOR (1<<12) /* 1 = active */
#define GPIO_ANAIN_MONITOR (1<<13) /* 1 = active */
-#define GPIO_AK5385A_MCLK (1<<14) /* must be 0 */
-#define GPIO_MUTE_CONTROL (1<<15) /* 0 = off, 1 = on */
+#define GPIO_AK5385A_CKS1 (1<<14) /* must be 0 */
+#define GPIO_MUTE_CONTROL (1<<15) /* output mute, 1 = muted */
+
+#define GPIO_RATE_MASK (GPIO_FREQ_MASK | GPIO_MULTI_MASK | \
+ GPIO_CLOCK_MASK)
+#define GPIO_AK5385A_MASK (GPIO_AK5385A_CKS0 | GPIO_AK5385A_DFS0 | \
+ GPIO_AK5385A_DFS1 | GPIO_AK5385A_CKS1)
+
+#define JULI_PCM_RATE (SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+ SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+ SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | \
+ SNDRV_PCM_RATE_176400 | SNDRV_PCM_RATE_192000)
+
+#define GPIO_RATE_16000 (GPIO_FREQ_32KHZ | GPIO_MULTI_HALF | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_22050 (GPIO_FREQ_44KHZ | GPIO_MULTI_HALF | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_24000 (GPIO_FREQ_48KHZ | GPIO_MULTI_HALF | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_32000 (GPIO_FREQ_32KHZ | GPIO_MULTI_1X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_44100 (GPIO_FREQ_44KHZ | GPIO_MULTI_1X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_48000 (GPIO_FREQ_48KHZ | GPIO_MULTI_1X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_64000 (GPIO_FREQ_32KHZ | GPIO_MULTI_2X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_88200 (GPIO_FREQ_44KHZ | GPIO_MULTI_2X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_96000 (GPIO_FREQ_48KHZ | GPIO_MULTI_2X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_176400 (GPIO_FREQ_44KHZ | GPIO_MULTI_4X | \
+ GPIO_INTERNAL_CLOCK)
+#define GPIO_RATE_192000 (GPIO_FREQ_48KHZ | GPIO_MULTI_4X | \
+ GPIO_INTERNAL_CLOCK)
+
+/*
+ * Initial setup of the conversion array GPIO <-> rate
+ */
+static unsigned int juli_rates[] = {
+ 16000, 22050, 24000, 32000,
+ 44100, 48000, 64000, 88200,
+ 96000, 176400, 192000,
+};
+
+static unsigned int gpio_vals[] = {
+ GPIO_RATE_16000, GPIO_RATE_22050, GPIO_RATE_24000, GPIO_RATE_32000,
+ GPIO_RATE_44100, GPIO_RATE_48000, GPIO_RATE_64000, GPIO_RATE_88200,
+ GPIO_RATE_96000, GPIO_RATE_176400, GPIO_RATE_192000,
+};
+
+static struct snd_pcm_hw_constraint_list juli_rates_info = {
+ .count = ARRAY_SIZE(juli_rates),
+ .list = juli_rates,
+ .mask = 0,
+};
+
+static int get_gpio_val(int rate)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(juli_rates); i++)
+ if (juli_rates[i] == rate)
+ return gpio_vals[i];
+ return 0;
+}
static void juli_ak4114_write(void *private_data, unsigned char reg, unsigned char val)
{
@@ -77,6 +170,10 @@ static unsigned char juli_ak4114_read(void *private_data, unsigned char reg)
return snd_vt1724_read_i2c((struct snd_ice1712 *)private_data, AK4114_ADDR, reg);
}
+/*
+ * If SPDIF capture and slaved to SPDIF-IN, setting runtime rate
+ * to the external rate
+ */
static void juli_spdif_in_open(struct snd_ice1712 *ice,
struct snd_pcm_substream *substream)
{
@@ -84,7 +181,8 @@ static void juli_spdif_in_open(struct snd_ice1712 *ice,
struct snd_pcm_runtime *runtime = substream->runtime;
int rate;
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
+ !ice->is_spdif_master(ice))
return;
rate = snd_ak4114_external_rate(spec->ak4114);
if (rate >= runtime->hw.rate_min && rate <= runtime->hw.rate_max) {
@@ -115,57 +213,285 @@ static void juli_akm_write(struct snd_akm4xxx *ak, int chip,
}
/*
- * change the rate of envy24HT, AK4358
+ * change the rate of envy24HT, AK4358, AK5385
*/
static void juli_akm_set_rate_val(struct snd_akm4xxx *ak, unsigned int rate)
{
- unsigned char old, tmp, dfs;
+ unsigned char old, tmp, ak4358_dfs;
+ unsigned int ak5385_pins, old_gpio, new_gpio;
+ struct snd_ice1712 *ice = ak->private_data[0];
+ struct juli_spec *spec = ice->spec;
- if (rate == 0) /* no hint - S/PDIF input is master, simply return */
+ if (rate == 0) /* no hint - S/PDIF input is master or the new spdif
+ input rate undetected, simply return */
return;
-
+
/* adjust DFS on codecs */
- if (rate > 96000)
- dfs = 2;
- else if (rate > 48000)
- dfs = 1;
- else
- dfs = 0;
-
+ if (rate > 96000) {
+ ak4358_dfs = 2;
+ ak5385_pins = GPIO_AK5385A_DFS1 | GPIO_AK5385A_CKS0;
+ } else if (rate > 48000) {
+ ak4358_dfs = 1;
+ ak5385_pins = GPIO_AK5385A_DFS0;
+ } else {
+ ak4358_dfs = 0;
+ ak5385_pins = 0;
+ }
+ /* AK5385 first, since it requires cold reset affecting both codecs */
+ old_gpio = ice->gpio.get_data(ice);
+ new_gpio = (old_gpio & ~GPIO_AK5385A_MASK) | ak5385_pins;
+ /* printk(KERN_DEBUG "JULI - ak5385 set_rate_val: new gpio 0x%x\n",
+ new_gpio); */
+ ice->gpio.set_data(ice, new_gpio);
+
+ /* cold reset */
+ old = inb(ICEMT1724(ice, AC97_CMD));
+ outb(old | VT1724_AC97_COLD, ICEMT1724(ice, AC97_CMD));
+ udelay(1);
+ outb(old & ~VT1724_AC97_COLD, ICEMT1724(ice, AC97_CMD));
+
+ /* AK4358 */
+ /* set new value, reset DFS */
tmp = snd_akm4xxx_get(ak, 0, 2);
- old = (tmp >> 4) & 0x03;
- if (old == dfs)
- return;
- /* reset DFS */
snd_akm4xxx_reset(ak, 1);
tmp = snd_akm4xxx_get(ak, 0, 2);
tmp &= ~(0x03 << 4);
- tmp |= dfs << 4;
+ tmp |= ak4358_dfs << 4;
snd_akm4xxx_set(ak, 0, 2, tmp);
snd_akm4xxx_reset(ak, 0);
+
+ /* reinit ak4114 */
+ snd_ak4114_reinit(spec->ak4114);
}
+#define AK_DAC(xname, xch) { .name = xname, .num_channels = xch }
+#define PCM_VOLUME "PCM Playback Volume"
+#define MONITOR_AN_IN_VOLUME "Monitor Analog In Volume"
+#define MONITOR_DIG_IN_VOLUME "Monitor Digital In Volume"
+#define MONITOR_DIG_OUT_VOLUME "Monitor Digital Out Volume"
+
+static const struct snd_akm4xxx_dac_channel juli_dac[] = {
+ AK_DAC(PCM_VOLUME, 2),
+ AK_DAC(MONITOR_AN_IN_VOLUME, 2),
+ AK_DAC(MONITOR_DIG_OUT_VOLUME, 2),
+ AK_DAC(MONITOR_DIG_IN_VOLUME, 2),
+};
+
+
static struct snd_akm4xxx akm_juli_dac __devinitdata = {
.type = SND_AK4358,
- .num_dacs = 2,
+ .num_dacs = 8, /* DAC1 - analog out
+ DAC2 - analog in monitor
+ DAC3 - digital out monitor
+ DAC4 - digital in monitor
+ */
.ops = {
.lock = juli_akm_lock,
.unlock = juli_akm_unlock,
.write = juli_akm_write,
.set_rate_val = juli_akm_set_rate_val
+ },
+ .dac_info = juli_dac,
+};
+
+#define juli_mute_info snd_ctl_boolean_mono_info
+
+static int juli_mute_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int val;
+ val = ice->gpio.get_data(ice) & (unsigned int) kcontrol->private_value;
+ if (kcontrol->private_value == GPIO_MUTE_CONTROL)
+ /* val 0 = signal on */
+ ucontrol->value.integer.value[0] = (val) ? 0 : 1;
+ else
+ /* val 1 = signal on */
+ ucontrol->value.integer.value[0] = (val) ? 1 : 0;
+ return 0;
+}
+
+static int juli_mute_put(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kcontrol);
+ unsigned int old_gpio, new_gpio;
+ old_gpio = ice->gpio.get_data(ice);
+ if (ucontrol->value.integer.value[0]) {
+ /* unmute */
+ if (kcontrol->private_value == GPIO_MUTE_CONTROL) {
+ /* 0 = signal on */
+ new_gpio = old_gpio & ~GPIO_MUTE_CONTROL;
+ /* un-smuting DAC */
+ snd_akm4xxx_write(ice->akm, 0, 0x01, 0x01);
+ } else
+ /* 1 = signal on */
+ new_gpio = old_gpio |
+ (unsigned int) kcontrol->private_value;
+ } else {
+ /* mute */
+ if (kcontrol->private_value == GPIO_MUTE_CONTROL) {
+ /* 1 = signal off */
+ new_gpio = old_gpio | GPIO_MUTE_CONTROL;
+ /* smuting DAC */
+ snd_akm4xxx_write(ice->akm, 0, 0x01, 0x03);
+ } else
+ /* 0 = signal off */
+ new_gpio = old_gpio &
+ ~((unsigned int) kcontrol->private_value);
+ }
+ /* printk("JULI - mute/unmute: control_value: 0x%x, old_gpio: 0x%x, \
+ new_gpio 0x%x\n",
+ (unsigned int)ucontrol->value.integer.value[0], old_gpio,
+ new_gpio); */
+ if (old_gpio != new_gpio) {
+ ice->gpio.set_data(ice, new_gpio);
+ return 1;
+ }
+ /* no change */
+ return 0;
+}
+
+static struct snd_kcontrol_new juli_mute_controls[] __devinitdata = {
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = juli_mute_info,
+ .get = juli_mute_get,
+ .put = juli_mute_put,
+ .private_value = GPIO_MUTE_CONTROL,
+ },
+ /* Although the following functionality respects the succint NDA'd
+ * documentation from the card manufacturer, and the same way of
+ * operation is coded in OSS Juli driver, only Digital Out monitor
+ * seems to work. Surprisingly, Analog input monitor outputs Digital
+ * output data. The two are independent, as enabling both doubles
+ * volume of the monitor sound.
+ *
+ * Checking traces on the board suggests the functionality described
+ * by the manufacturer is correct - I2S from ADC and AK4114
+ * go to ICE as well as to Xilinx, I2S inputs of DAC2,3,4 (the monitor
+ * inputs) are fed from Xilinx.
+ *
+ * I even checked traces on board and coded a support in driver for
+ * an alternative possiblity - the unused I2S ICE output channels
+ * switched to HW-IN/SPDIF-IN and providing the monitoring signal to
+ * the DAC - to no avail. The I2S outputs seem to be unconnected.
+ *
+ * The windows driver supports the monitoring correctly.
+ */
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Monitor Analog In Switch",
+ .info = juli_mute_info,
+ .get = juli_mute_get,
+ .put = juli_mute_put,
+ .private_value = GPIO_ANAIN_MONITOR,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Monitor Digital Out Switch",
+ .info = juli_mute_info,
+ .get = juli_mute_get,
+ .put = juli_mute_put,
+ .private_value = GPIO_DIGOUT_MONITOR,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Monitor Digital In Switch",
+ .info = juli_mute_info,
+ .get = juli_mute_get,
+ .put = juli_mute_put,
+ .private_value = GPIO_DIGIN_MONITOR,
+ },
+};
+
+
+static void ak4358_proc_regs_read(struct snd_info_entry *entry,
+ struct snd_info_buffer *buffer)
+{
+ struct snd_ice1712 *ice = (struct snd_ice1712 *)entry->private_data;
+ int reg, val;
+ for (reg = 0; reg <= 0xf; reg++) {
+ val = snd_akm4xxx_get(ice->akm, 0, reg);
+ snd_iprintf(buffer, "0x%02x = 0x%02x\n", reg, val);
}
+}
+
+static void ak4358_proc_init(struct snd_ice1712 *ice)
+{
+ struct snd_info_entry *entry;
+ if (!snd_card_proc_new(ice->card, "ak4358_codec", &entry))
+ snd_info_set_text_ops(entry, ice, ak4358_proc_regs_read);
+}
+
+static char *slave_vols[] __devinitdata = {
+ PCM_VOLUME,
+ MONITOR_AN_IN_VOLUME,
+ MONITOR_DIG_IN_VOLUME,
+ MONITOR_DIG_OUT_VOLUME,
+ NULL
};
+static __devinitdata
+DECLARE_TLV_DB_SCALE(juli_master_db_scale, -6350, 50, 1);
+
+static struct snd_kcontrol __devinit *ctl_find(struct snd_card *card,
+ const char *name)
+{
+ struct snd_ctl_elem_id sid;
+ memset(&sid, 0, sizeof(sid));
+ /* FIXME: strcpy is bad. */
+ strcpy(sid.name, name);
+ sid.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ return snd_ctl_find_id(card, &sid);
+}
+
+static void __devinit add_slaves(struct snd_card *card,
+ struct snd_kcontrol *master, char **list)
+{
+ for (; *list; list++) {
+ struct snd_kcontrol *slave = ctl_find(card, *list);
+ /* printk(KERN_DEBUG "add_slaves - %s\n", *list); */
+ if (slave) {
+ /* printk(KERN_DEBUG "slave %s found\n", *list); */
+ snd_ctl_add_slave(master, slave);
+ }
+ }
+}
+
static int __devinit juli_add_controls(struct snd_ice1712 *ice)
{
struct juli_spec *spec = ice->spec;
int err;
+ unsigned int i;
+ struct snd_kcontrol *vmaster;
+
err = snd_ice1712_akm4xxx_build_controls(ice);
if (err < 0)
return err;
+
+ for (i = 0; i < ARRAY_SIZE(juli_mute_controls); i++) {
+ err = snd_ctl_add(ice->card,
+ snd_ctl_new1(&juli_mute_controls[i], ice));
+ if (err < 0)
+ return err;
+ }
+ /* Create virtual master control */
+ vmaster = snd_ctl_make_virtual_master("Master Playback Volume",
+ juli_master_db_scale);
+ if (!vmaster)
+ return -ENOMEM;
+ add_slaves(ice->card, vmaster, slave_vols);
+ err = snd_ctl_add(ice->card, vmaster);
+ if (err < 0)
+ return err;
+
/* only capture SPDIF over AK4114 */
err = snd_ak4114_build(spec->ak4114, NULL,
- ice->pcm_pro->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
+ ice->pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream);
+
+ ak4358_proc_init(ice);
if (err < 0)
return err;
return 0;
@@ -174,6 +500,74 @@ static int __devinit juli_add_controls(struct snd_ice1712 *ice)
/*
* initialize the chip
*/
+
+static inline int juli_is_spdif_master(struct snd_ice1712 *ice)
+{
+ return (ice->gpio.get_data(ice) & GPIO_INTERNAL_CLOCK) ? 0 : 1;
+}
+
+static unsigned int juli_get_rate(struct snd_ice1712 *ice)
+{
+ int i;
+ unsigned char result;
+
+ result = ice->gpio.get_data(ice) & GPIO_RATE_MASK;
+ for (i = 0; i < ARRAY_SIZE(gpio_vals); i++)
+ if (gpio_vals[i] == result)
+ return juli_rates[i];
+ return 0;
+}
+
+/* setting new rate */
+static void juli_set_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+ unsigned int old, new;
+ unsigned char val;
+
+ old = ice->gpio.get_data(ice);
+ new = (old & ~GPIO_RATE_MASK) | get_gpio_val(rate);
+ /* printk(KERN_DEBUG "JULI - set_rate: old %x, new %x\n",
+ old & GPIO_RATE_MASK,
+ new & GPIO_RATE_MASK); */
+
+ ice->gpio.set_data(ice, new);
+ /* switching to external clock - supplied by external circuits */
+ val = inb(ICEMT1724(ice, RATE));
+ outb(val | VT1724_SPDIF_MASTER, ICEMT1724(ice, RATE));
+}
+
+static inline unsigned char juli_set_mclk(struct snd_ice1712 *ice,
+ unsigned int rate)
+{
+ /* no change in master clock */
+ return 0;
+}
+
+/* setting clock to external - SPDIF */
+static void juli_set_spdif_clock(struct snd_ice1712 *ice)
+{
+ unsigned int old;
+ old = ice->gpio.get_data(ice);
+ /* external clock (= 0), multiply 1x, 48kHz */
+ ice->gpio.set_data(ice, (old & ~GPIO_RATE_MASK) | GPIO_MULTI_1X |
+ GPIO_FREQ_48KHZ);
+}
+
+/* Called when ak4114 detects change in the input SPDIF stream */
+static void juli_ak4114_change(struct ak4114 *ak4114, unsigned char c0,
+ unsigned char c1)
+{
+ struct snd_ice1712 *ice = ak4114->change_callback_private;
+ int rate;
+ if (ice->is_spdif_master(ice) && c1) {
+ /* only for SPDIF master mode, rate was changed */
+ rate = snd_ak4114_external_rate(ak4114);
+ /* printk(KERN_DEBUG "ak4114 - input rate changed to %d\n",
+ rate); */
+ juli_akm_set_rate_val(ice->akm, rate);
+ }
+}
+
static int __devinit juli_init(struct snd_ice1712 *ice)
{
static const unsigned char ak4114_init_vals[] = {
@@ -203,6 +597,11 @@ static int __devinit juli_init(struct snd_ice1712 *ice)
ice, &spec->ak4114);
if (err < 0)
return err;
+ /* callback for codecs rate setting */
+ spec->ak4114->change_callback = juli_ak4114_change;
+ spec->ak4114->change_callback_private = ice;
+ /* AK4114 in Juli can detect external rate correctly */
+ spec->ak4114->check_flags = 0;
#if 0
/* it seems that the analog doughter board detection does not work
@@ -226,6 +625,14 @@ static int __devinit juli_init(struct snd_ice1712 *ice)
return err;
}
+ /* juli is clocked by Xilinx array */
+ ice->hw_rates = &juli_rates_info;
+ ice->is_spdif_master = juli_is_spdif_master;
+ ice->get_rate = juli_get_rate;
+ ice->set_rate = juli_set_rate;
+ ice->set_mclk = juli_set_mclk;
+ ice->set_spdif_clock = juli_set_spdif_clock;
+
ice->spdif.ops.open = juli_spdif_in_open;
return 0;
}
@@ -237,18 +644,20 @@ static int __devinit juli_init(struct snd_ice1712 *ice)
*/
static unsigned char juli_eeprom[] __devinitdata = {
- [ICE_EEP2_SYSCONF] = 0x20, /* clock 512, mpu401, 1xADC, 1xDACs */
+ [ICE_EEP2_SYSCONF] = 0x2b, /* clock 512, mpu401, 1xADC, 1xDACs,
+ SPDIF in */
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
[ICE_EEP2_I2S] = 0xf8, /* vol, 96k, 24bit, 192k */
[ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
- [ICE_EEP2_GPIO_DIR] = 0x9f,
+ [ICE_EEP2_GPIO_DIR] = 0x9f, /* 5, 6:inputs; 7, 4-0 outputs*/
[ICE_EEP2_GPIO_DIR1] = 0xff,
[ICE_EEP2_GPIO_DIR2] = 0x7f,
- [ICE_EEP2_GPIO_MASK] = 0x9f,
- [ICE_EEP2_GPIO_MASK1] = 0xff,
+ [ICE_EEP2_GPIO_MASK] = 0x60, /* 5, 6: locked; 7, 4-0 writable */
+ [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0-7 writable */
[ICE_EEP2_GPIO_MASK2] = 0x7f,
- [ICE_EEP2_GPIO_STATE] = 0x16, /* internal clock, multiple 1x, 48kHz */
- [ICE_EEP2_GPIO_STATE1] = 0x80, /* mute */
+ [ICE_EEP2_GPIO_STATE] = GPIO_FREQ_48KHZ | GPIO_MULTI_1X |
+ GPIO_INTERNAL_CLOCK, /* internal clock, multiple 1x, 48kHz*/
+ [ICE_EEP2_GPIO_STATE1] = 0x00, /* unmuted */
[ICE_EEP2_GPIO_STATE2] = 0x00,
};