aboutsummaryrefslogtreecommitdiff
path: root/Documentation/arm/memory.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/arm/memory.txt
downloadlinux-stericsson-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/arm/memory.txt')
-rw-r--r--Documentation/arm/memory.txt72
1 files changed, 72 insertions, 0 deletions
diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt
new file mode 100644
index 000000000000..4b1c93a8177b
--- /dev/null
+++ b/Documentation/arm/memory.txt
@@ -0,0 +1,72 @@
+ Kernel Memory Layout on ARM Linux
+
+ Russell King <rmk@arm.linux.org.uk>
+ May 21, 2004 (2.6.6)
+
+This document describes the virtual memory layout which the Linux
+kernel uses for ARM processors. It indicates which regions are
+free for platforms to use, and which are used by generic code.
+
+The ARM CPU is capable of addressing a maximum of 4GB virtual memory
+space, and this must be shared between user space processes, the
+kernel, and hardware devices.
+
+As the ARM architecture matures, it becomes necessary to reserve
+certain regions of VM space for use for new facilities; therefore
+this document may reserve more VM space over time.
+
+Start End Use
+--------------------------------------------------------------------------
+ffff8000 ffffffff copy_user_page / clear_user_page use.
+ For SA11xx and Xscale, this is used to
+ setup a minicache mapping.
+
+ffff1000 ffff7fff Reserved.
+ Platforms must not use this address range.
+
+ffff0000 ffff0fff CPU vector page.
+ The CPU vectors are mapped here if the
+ CPU supports vector relocation (control
+ register V bit.)
+
+ffc00000 fffeffff DMA memory mapping region. Memory returned
+ by the dma_alloc_xxx functions will be
+ dynamically mapped here.
+
+ff000000 ffbfffff Reserved for future expansion of DMA
+ mapping region.
+
+VMALLOC_END feffffff Free for platform use, recommended.
+
+VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space.
+ Memory returned by vmalloc/ioremap will
+ be dynamically placed in this region.
+ VMALLOC_START may be based upon the value
+ of the high_memory variable.
+
+PAGE_OFFSET high_memory-1 Kernel direct-mapped RAM region.
+ This maps the platforms RAM, and typically
+ maps all platform RAM in a 1:1 relationship.
+
+TASK_SIZE PAGE_OFFSET-1 Kernel module space
+ Kernel modules inserted via insmod are
+ placed here using dynamic mappings.
+
+00001000 TASK_SIZE-1 User space mappings
+ Per-thread mappings are placed here via
+ the mmap() system call.
+
+00000000 00000fff CPU vector page / null pointer trap
+ CPUs which do not support vector remapping
+ place their vector page here. NULL pointer
+ dereferences by both the kernel and user
+ space are also caught via this mapping.
+
+Please note that mappings which collide with the above areas may result
+in a non-bootable kernel, or may cause the kernel to (eventually) panic
+at run time.
+
+Since future CPUs may impact the kernel mapping layout, user programs
+must not access any memory which is not mapped inside their 0x0001000
+to TASK_SIZE address range. If they wish to access these areas, they
+must set up their own mappings using open() and mmap().