aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-09-11 14:10:29 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-09-11 14:10:29 -0700
commit61c3dae670436131647c2f05a9ba3571503b79ff (patch)
treefdef0dfc1c6fbbb29969fb1508ab50e382a2c03b
parent98ac9a608dc79ba8a20cee77fe959a6dfccdaa63 (diff)
parent6b98174b957ce87e0efe7c675d6cfd9e4c7a1912 (diff)
downloadlinux-stericsson-61c3dae670436131647c2f05a9ba3571503b79ff.tar.gz
Merge tag 'usb-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH: "Here are some small USB gadget, phy, and xhci fixes for 4.8-rc6. All of these resolve minor issues that have been reported, and all have been in linux-next with no reported issues" * tag 'usb-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase xhci: fix null pointer dereference in stop command timeout function usb: dwc3: pci: fix build warning on !PM_SLEEP usb: gadget: prevent potenial null pointer dereference on skb->len usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition usb: phy: phy-generic: Check clk_prepare_enable() error usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON Revert "usb: dwc3: gadget: always decrement by 1"
-rw-r--r--drivers/usb/chipidea/udc.c9
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c4
-rw-r--r--drivers/usb/dwc3/gadget.c5
-rw-r--r--drivers/usb/gadget/function/f_eem.c2
-rw-r--r--drivers/usb/gadget/udc/renesas_usb3.c2
-rw-r--r--drivers/usb/host/xhci-ring.c6
-rw-r--r--drivers/usb/phy/phy-generic.c8
-rw-r--r--drivers/usb/renesas_usbhs/mod.c11
8 files changed, 39 insertions, 8 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index dfec5a176315..b93356834bb5 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -949,6 +949,15 @@ static int isr_setup_status_phase(struct ci_hdrc *ci)
int retval;
struct ci_hw_ep *hwep;
+ /*
+ * Unexpected USB controller behavior, caused by bad signal integrity
+ * or ground reference problems, can lead to isr_setup_status_phase
+ * being called with ci->status equal to NULL.
+ * If this situation occurs, you should review your USB hardware design.
+ */
+ if (WARN_ON_ONCE(!ci->status))
+ return -EPIPE;
+
hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
ci->status->context = ci;
ci->status->complete = isr_setup_status_complete;
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 0a32430f4c41..6df0f5dad9a4 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -249,7 +249,9 @@ static int dwc3_pci_runtime_resume(struct device *dev)
return pm_runtime_get(&dwc3->dev);
}
+#endif /* CONFIG_PM */
+#ifdef CONFIG_PM_SLEEP
static int dwc3_pci_pm_dummy(struct device *dev)
{
/*
@@ -262,7 +264,7 @@ static int dwc3_pci_pm_dummy(struct device *dev)
*/
return 0;
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
static struct dev_pm_ops dwc3_pci_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_pm_dummy, dwc3_pci_pm_dummy)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7a8d3d822b54..122e64df2f4d 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -884,9 +884,12 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
return DWC3_TRB_NUM - 1;
}
- trbs_left = dep->trb_dequeue - dep->trb_enqueue - 1;
+ trbs_left = dep->trb_dequeue - dep->trb_enqueue;
trbs_left &= (DWC3_TRB_NUM - 1);
+ if (dep->trb_dequeue < dep->trb_enqueue)
+ trbs_left--;
+
return trbs_left;
}
diff --git a/drivers/usb/gadget/function/f_eem.c b/drivers/usb/gadget/function/f_eem.c
index 8741fd740174..007ec6e4a5d4 100644
--- a/drivers/usb/gadget/function/f_eem.c
+++ b/drivers/usb/gadget/function/f_eem.c
@@ -342,7 +342,7 @@ static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb)
struct sk_buff *skb2 = NULL;
struct usb_ep *in = port->in_ep;
int headroom, tailroom, padlen = 0;
- u16 len = skb->len;
+ u16 len;
if (!skb)
return NULL;
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index 93a3bec81df7..fb8fc34827ab 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -106,6 +106,7 @@
/* DRD_CON */
#define DRD_CON_PERI_CON BIT(24)
+#define DRD_CON_VBOUT BIT(0)
/* USB_INT_ENA_1 and USB_INT_STA_1 */
#define USB_INT_1_B3_PLLWKUP BIT(31)
@@ -363,6 +364,7 @@ static void usb3_init_epc_registers(struct renesas_usb3 *usb3)
{
/* FIXME: How to change host / peripheral mode as well? */
usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON);
+ usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON);
usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index fd9fd12e4861..797137e26549 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -850,6 +850,10 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
spin_lock_irqsave(&xhci->lock, flags);
ep->stop_cmds_pending--;
+ if (xhci->xhc_state & XHCI_STATE_REMOVING) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
+ }
if (xhci->xhc_state & XHCI_STATE_DYING) {
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Stop EP timer ran, but another timer marked "
@@ -903,7 +907,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Calling usb_hc_died()");
- usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
+ usb_hc_died(xhci_to_hcd(xhci));
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"xHCI host controller is dead.");
}
diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c
index 980c9dee09eb..427efb5eebae 100644
--- a/drivers/usb/phy/phy-generic.c
+++ b/drivers/usb/phy/phy-generic.c
@@ -144,14 +144,18 @@ static irqreturn_t nop_gpio_vbus_thread(int irq, void *data)
int usb_gen_phy_init(struct usb_phy *phy)
{
struct usb_phy_generic *nop = dev_get_drvdata(phy->dev);
+ int ret;
if (!IS_ERR(nop->vcc)) {
if (regulator_enable(nop->vcc))
dev_err(phy->dev, "Failed to enable power\n");
}
- if (!IS_ERR(nop->clk))
- clk_prepare_enable(nop->clk);
+ if (!IS_ERR(nop->clk)) {
+ ret = clk_prepare_enable(nop->clk);
+ if (ret)
+ return ret;
+ }
nop_reset(nop);
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index d4be5d594896..28965ef4f824 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -282,9 +282,16 @@ static irqreturn_t usbhs_interrupt(int irq, void *data)
if (usbhs_mod_is_host(priv))
usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
- usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
+ /*
+ * The driver should not clear the xxxSTS after the line of
+ * "call irq callback functions" because each "if" statement is
+ * possible to call the callback function for avoiding any side effects.
+ */
+ if (irq_state.intsts0 & BRDY)
+ usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
- usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
+ if (irq_state.intsts0 & BEMP)
+ usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
/*
* call irq callback functions