aboutsummaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2009-08-23ASoC: Pass correct platform data from pxa2xx-ac97Marek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-23ASoC: free socdev if init_card() fails in wm9705_soc_probe()Roel Kluin
Free socdev if snd_soc_init_card() fails. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add DAPM widget power decision debugfs filesMark Brown
Currently when built with DEBUG DAPM will dump information about the power state decisions it is taking for each widget to dmesg. This isn't an ideal way of getting the information - it requires a kernel build to turn it on and off and for large hub CODECs the volume of information is so large as to be illegible. When the output goes to the console it can also cause a noticable impact on performance simply to print it out. Improve the situation by adding a dapm directory to our debugfs tree containing a file per widget with the same information in it. This still requires a decision to build with debugfs support but is easier to navigate and much less intrusive. In addition to the previously displayed information active streams are also shown in these files. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add FSI-AK4642 sound support for SuperHKuninori Morimoto
This patch is tested by ms7724se Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add ak4642/ak4643 codec supportKuninori Morimoto
This is very simple driver for ALSA It supprt headphone output and stereo input only This patch is tested by ms7724se Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: S3C24XX: Support for Simtec Hermes boardsBen Dooks
Add support for the tlv320aic3x CODEC on the Simtec Hermes board. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: tlv320aic3x: fixup board device changesBen Dooks
Fixup the device changes by modifying the files that we just removed the explicit device creation from with i2c_register_board_info() until this can be moved into the relevant board files. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: tlv320aic3x: Change to use device modelBen Dooks
The tlv320aic3x driver managed its own i2c device, instead of an extant one created by the board support code. Change the code to make it so that the driver binds to an extant (in this case i2c) device. Add explict tlv320aic33 as well as tlv320aic3x to the supported device table and remove the old driver bindings from the users of this code. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boardsBen Dooks
Add core support for the range of S3C24XX Simtec boards with TLV320AIC23 CODECs on them. Since there are also boards with similar IIS routing the AMP and the configuration code is placed in a core file for re-use with other CODEC bindings. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: OMAP: Use DMA operating mode of McBSPEduardo Valentin
Configures DMA sync mode depending on McBSP operating mode value. The value is configurable by McBSP instance. So, depending on McBSP operating mode, the DMA sync mode is passed from omap-mcbsp to omap-pcm. Besides that, it also configures McBSP threshold value depending on which McBSP mode is activated. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: OMAP: Use McBSP threshold to playback and captureEduardo Valentin
This patch changes the way DMA is done in omap-pcm.c in order to reduce power consumption. There is no need to have so much SW control in order to have DMA in idle state during audio streaming. Configuring McBSP threshold value and DMA to FRAME_SYNC are sufficient. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Always syncronize audio transfers on framesEero Nurkkala
All these steps are required for ASoC to behave correctly. rccr and xccr are format dependent, for example TDM audio has different values than I2S or DSP_A. Also the omap_mcbsp_xmit_enable and/or omap_mcbsp_recv_enable must be called right after the DMA has started. This provides no longer L and R channels switching at random. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Add runtime check for RFIG and XFIGEero Nurkkala
This is, no RFIG or XFIG (Not defined in 34xx), correct initiliazation of rccr and xccr. Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: OMAP: Make DMA 64 alignedEduardo Valentin
Align DMA address to DMA burst transaction sizes. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: OMAP: Enable DMA burst modeEduardo Valentin
Improve DMA transfers by enabling Burst transaction. Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: Add SuperH FSI driver support for ALSAKuninori Morimoto
This driver is very simple. It support playback only now. This patch is tested by ms7724se board. Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-20ASoC: S3C24XX : Align the peroid size to the buffer sizeShine Liu
> Then it's a driver bug. If unaligned period size is allowed, it means > that the irq is really generated in that period, not at the buffer > boundary. Otherwise, it must have a proper hw-constraint to align the > period size to the buffer size. This patch will fix the bug metioned in the above mail. Force the peroid size to be aligned with the buffer size. Based and tested on linux-2.6.31-rc6. Signed-off-by: Shine Liu <shinel@foxmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-19ALSA: Restore support for DMAless DAIs on PXAMark Brown
Used for applications such as direct bluetooth connections on smartphones which don't go via the CPU. This used to be supported before the refactoring to share code but this check was removed during that move. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-19ASoC: Provide default set_bias_level() implementationMark Brown
If the CODEC does not provide a set_bias_level() then update the bias_level variable for it since other parts of the system expect that to be maintained. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-18ASoC: Remove duplicate ADC/DAC widgets from wm_hubs.cMark Brown
These need to be in the CODEC since the DAIs supported by the CODECs aren't static. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-18ASoC: Reenable S3C64xx I2S supportMark Brown
Joonyoung Shim reports that S3C64xx I2S is working on the NCP boards so allow it to be selected in Kconfig. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmciro.com>
2009-08-18ASoC: Fix data format configuration for S3C64XX IISv2Joonyoung Shim
The data format configuration for S3C64xx IISv2 was hardcoded for IISMOD register. This patch changes to the defined values it. And instead of bits 9 and 10 of IISMOD we should clear bits 13 and 14. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: Implement TDM configuration for WM8993Mark Brown
Note that the number of slots used internally is specified in terms of stereo slots while the external API works with mono slots. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: Fix WM8993 MCLK configuration for high frequency MCLKsMark Brown
When used without the PLL we were accidentally clearing the MCLK/2 divider, resulting in a double rate SYSCLK when the divider should have been used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: Power speakers and headphones simultaneouslyMark Brown
Speaker and headphone outputs do not need to be handled separately since they can't be part of the same path. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: Fix handling of bias levels for non-DAPM codecsMark Brown
If the system doesn't have any DAPM widgets then we can't use their state to check if the bias level for the codec should be up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: UDA134X: Fix mistaken mute/unmute codeShine Liu
There is a mistake in current uda134x_mute function: mute_reg has been changed in line 162 or line 164, so uda134x_write should write "mute_reg" but not "mute_reg & ~(1<<2)" to UDA134X_DATA010. Signed-off-by: Shine Liu <shinel@foxmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: OMAP: Enhance OMAP1510 DMA progress software counterJanusz Krzysztofik
Enhance period_index accuracy, particularly just before buffer rewind, by making use of DMA interrupt status flags in addition to simply counting up interrupts. Created against linux-2.6.31-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: OMAP: Make use of DMA channel self linking on OMAP1510Janusz Krzysztofik
Use newly implemented DMA channel self linking on OMAP1510 like on other OMAP models. Remove unnecessary DMA transfer restart from interrupt handler routine. The interrupt routine used to maintain a period index, originally needed for counting up periods up to a full buffer in order to restart the DMA transfer. For some time, this counter is also used as a replacement for hardware DMA progress counter that has been found unusable on OMAP1510 in case of playback. Thus, the period index calculation cannot be omitted completely. However, the accuracy of this counter can still suffer from missing DMA interrupts. In order to work correctly, it requires patch 1 from this series also applied: [RFC][PATCH 1/3] ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510 Created against linux-2.6.31-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15ASoC: Factor out cache I/O from WM8974Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15Merge branch 'wm8974-upstream' into for-2.6.32Mark Brown
2009-08-15ASoC: Hook i.MX into buildMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15ASoC: Staticise unexported variablesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15ASoC: Remove unneeded i.MX dependency on SNDMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15Merge branch 'for-2.6.32' into mxcMark Brown
Conflicts: sound/soc/Makefile
2009-08-14ASoC: delete -spi suffix in ad1938 and free private data while registers failBarry Song
Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-14ASoC: TWL4030: Fix for capture mixer stringsPeter Ujfalusi
Change the strings related to capture in order to be interpreted correctly by alsamixer and possible other UI based mixer applications. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ALSA: Allow passing platform_data for pxa2xx-ac97Marek Vasut
This patch adds support for passing platform data to ac97 bus devices from PXA2xx-AC97 driver.. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: DaVinci: Add audio support fot DA850/OMAP-L138 EVMChaithrika U S
There is one instance of McASP on DA850/OMAP-L138 SoC. This is connected to TLV320AIC3106 codec for audio playback and capture. This patch adds audio support on this platform. Some of the structure prefix names which are common for DA830/OMAP-L137 EVM and DA850/OMAP-L138 EVM have been renamed to da8xx from da830. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: DaVinci: Add a DAI format to McASP driverChaithrika U S
The patch adds a DAI format: Codec bit clock master and frame sync slave, to the driver. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: DaVinci: McASP driver enhacementsChaithrika U S
On DA830/OMAP-L137 and DA850/OMAP-L138 SoCs, the McASP peripheral has FIFO support. This FIFO provides additional data buffering. It also provides tolerance to variation in host/DMA controller response times. The read and write FIFO sizes are 256 bytes each. If FIFO is enabled, the DMA events from McASP are sent to the FIFO which in turn sends DMA requests to the host CPU according to the thresholds programmed. More details of the FIFO operation can be found at http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber= sprufm1&fileType=pdf This patch adds support for FIFO configuration. The platform data has a version field which differentiates the McASP on different SoCs. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: Factor out shared code from WM8993Mark Brown
The WM8993 analogue control is shared with other devices in the same product line. Since this is a very substantial proportion of the driver move the definitions of these controls into a new wm_hubs module which allows them to be shared between the two. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: Minor cleanups to AD1938 driverMark Brown
- Build in SND_SOC_ALL_CODECS. - Remove null suspend/resume stuff. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13new ad1836 codec driver based on asocBarry Song
There has been an ad1836 driver in sound/blackfin based on traditional alsa. The new driver is based on asoc. The architecture of ad1836 codec driver is very much like ad1938. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: TWL4030: Introduce PGAs for outputsPeter Ujfalusi
Dynamically control and control only the needed output amplifier muting/un-muting. The original code was muting and un-muting the following output amplifiers: Earpiece PreDrivL/R, CarkitL/R at the same time regardless which pin is actually in use at the given moment. Move these as separate PGA so only the needed amplifier will be touched. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: add output/input widgets in ad1938 to make dac/adc dynamic PM workBarry Song
According to the function dapm_dac_check_power() in sound/soc/soc-dapm.c, dac power can't be on/off stand-alone without any output widget as sink. And according to dapm_adc_check_power(), adc power can't be on/off stand-alone without any input widget as source. So we can't only define some stand-alone SND_SOC_DAPM_DAC/SND_SOC_DAPM_ADC to hope their power can be managed dynamically. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-12ASoC: Update AD1938 for new TDM slot APIMark Brown
It's only actually paying attention to the slot count anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-11ASoC: Update WM9081 for tdm_slot() API changeMark Brown
Store the TDM slot width then if it's set use that rather than the sample size to calculate BCLK. Leave imposing constraints to the core (which should do this but doesn't yet) or machine driver. Also allow 0 TDM slots to be configure (for use when disabling TDM). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-11Merge commit 'a5479e389e989acfeca9c32eeb0083d086202280' into for-2.6.32Mark Brown
2009-08-11ASoC: fix I2C build errorsRandy Dunlap
Fix soc build errors when I2C is built as a loadable module: (.text+0x5d26b): undefined reference to `i2c_master_send' soc-cache.c:(.text+0x5d32d): undefined reference to `i2c_transfer' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>