summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-03-09 17:50:02 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-03-09 17:50:02 -0700
commitd08edd8f09a0bc7f28c9559d134ffc37ff264962 (patch)
tree527d857382761d626a3a1283077ed33a1fef5c01 /drivers
parenteca8dac4fa477cb26eb6478f4a5d2cf381128753 (diff)
parent60c1beeff40b04097298e10640580f62420a55ca (diff)
downloadkernel-d08edd8f09a0bc7f28c9559d134ffc37ff264962.tar.gz
Merge tag 'spi-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown: "A collection of driver specific fixes to which the usual comments about them being important if you see them mostly apply (except for the comment fix). The pl022 one is particularly nasty for anyone affected by it" * tag 'spi-v4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pl022: Fix race in giveback() leading to driver lock-up spi: dw-mid: avoid potential NULL dereference spi: img-spfi: Verify max spfi transfer length spi: fix a typo in comment. spi: atmel: Fix interrupt setup for PDC transfers spi: dw: revisit FIFO size detection again spi: dw-pci: correct number of chip selects drivers: spi: ti-qspi: wait for busy bit clear before data write/read
Diffstat (limited to 'drivers')
-rw-r--r--drivers/spi/spi-atmel.c12
-rw-r--r--drivers/spi/spi-dw-mid.c6
-rw-r--r--drivers/spi/spi-dw-pci.c4
-rw-r--r--drivers/spi/spi-dw.c4
-rw-r--r--drivers/spi/spi-img-spfi.c7
-rw-r--r--drivers/spi/spi-pl022.c2
-rw-r--r--drivers/spi/spi-ti-qspi.c22
7 files changed, 46 insertions, 11 deletions
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 9af7841f2e8c..06de34001c66 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -764,17 +764,17 @@ static void atmel_spi_pdc_next_xfer(struct spi_master *master,
(unsigned long long)xfer->rx_dma);
}
- /* REVISIT: We're waiting for ENDRX before we start the next
+ /* REVISIT: We're waiting for RXBUFF before we start the next
* transfer because we need to handle some difficult timing
- * issues otherwise. If we wait for ENDTX in one transfer and
- * then starts waiting for ENDRX in the next, it's difficult
- * to tell the difference between the ENDRX interrupt we're
- * actually waiting for and the ENDRX interrupt of the
+ * issues otherwise. If we wait for TXBUFE in one transfer and
+ * then starts waiting for RXBUFF in the next, it's difficult
+ * to tell the difference between the RXBUFF interrupt we're
+ * actually waiting for and the RXBUFF interrupt of the
* previous transfer.
*
* It should be doable, though. Just not now...
*/
- spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+ spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
}
diff --git a/drivers/spi/spi-dw-mid.c b/drivers/spi/spi-dw-mid.c
index a0197fd4e95c..3ce39d10fafb 100644
--- a/drivers/spi/spi-dw-mid.c
+++ b/drivers/spi/spi-dw-mid.c
@@ -139,6 +139,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
1,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!txdesc)
+ return NULL;
+
txdesc->callback = dw_spi_dma_tx_done;
txdesc->callback_param = dws;
@@ -184,6 +187,9 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
1,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!rxdesc)
+ return NULL;
+
rxdesc->callback = dw_spi_dma_rx_done;
rxdesc->callback_param = dws;
diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c
index 5ba331047cbe..6d331e0db331 100644
--- a/drivers/spi/spi-dw-pci.c
+++ b/drivers/spi/spi-dw-pci.c
@@ -36,13 +36,13 @@ struct spi_pci_desc {
static struct spi_pci_desc spi_pci_mid_desc_1 = {
.setup = dw_spi_mid_init,
- .num_cs = 32,
+ .num_cs = 5,
.bus_num = 0,
};
static struct spi_pci_desc spi_pci_mid_desc_2 = {
.setup = dw_spi_mid_init,
- .num_cs = 4,
+ .num_cs = 2,
.bus_num = 1,
};
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 5a97a62b298a..4847afba89f4 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -621,14 +621,14 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
if (!dws->fifo_len) {
u32 fifo;
- for (fifo = 2; fifo <= 256; fifo++) {
+ for (fifo = 1; fifo < 256; fifo++) {
dw_writew(dws, DW_SPI_TXFLTR, fifo);
if (fifo != dw_readw(dws, DW_SPI_TXFLTR))
break;
}
dw_writew(dws, DW_SPI_TXFLTR, 0);
- dws->fifo_len = (fifo == 2) ? 0 : fifo - 1;
+ dws->fifo_len = (fifo == 1) ? 0 : fifo;
dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
}
}
diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c
index c01567d53581..e649bc7d4c08 100644
--- a/drivers/spi/spi-img-spfi.c
+++ b/drivers/spi/spi-img-spfi.c
@@ -459,6 +459,13 @@ static int img_spfi_transfer_one(struct spi_master *master,
unsigned long flags;
int ret;
+ if (xfer->len > SPFI_TRANSACTION_TSIZE_MASK) {
+ dev_err(spfi->dev,
+ "Transfer length (%d) is greater than the max supported (%d)",
+ xfer->len, SPFI_TRANSACTION_TSIZE_MASK);
+ return -EINVAL;
+ }
+
/*
* Stop all DMA and reset the controller if the previous transaction
* timed-out and never completed it's DMA.
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 89ca162801da..ee513a85296b 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -534,12 +534,12 @@ static void giveback(struct pl022 *pl022)
pl022->cur_msg = NULL;
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
- spi_finalize_current_message(pl022->master);
/* disable the SPI/SSP operation */
writew((readw(SSP_CR1(pl022->virtbase)) &
(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+ spi_finalize_current_message(pl022->master);
}
/**
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
index 884a716e50cb..5c0616870358 100644
--- a/drivers/spi/spi-ti-qspi.c
+++ b/drivers/spi/spi-ti-qspi.c
@@ -101,6 +101,7 @@ struct ti_qspi {
#define QSPI_FLEN(n) ((n - 1) << 0)
/* STATUS REGISTER */
+#define BUSY 0x01
#define WC 0x02
/* INTERRUPT REGISTER */
@@ -199,6 +200,21 @@ static void ti_qspi_restore_ctx(struct ti_qspi *qspi)
ti_qspi_write(qspi, ctx_reg->clkctrl, QSPI_SPI_CLOCK_CNTRL_REG);
}
+static inline u32 qspi_is_busy(struct ti_qspi *qspi)
+{
+ u32 stat;
+ unsigned long timeout = jiffies + QSPI_COMPLETION_TIMEOUT;
+
+ stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+ while ((stat & BUSY) && time_after(timeout, jiffies)) {
+ cpu_relax();
+ stat = ti_qspi_read(qspi, QSPI_SPI_STATUS_REG);
+ }
+
+ WARN(stat & BUSY, "qspi busy\n");
+ return stat & BUSY;
+}
+
static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
{
int wlen, count;
@@ -211,6 +227,9 @@ static int qspi_write_msg(struct ti_qspi *qspi, struct spi_transfer *t)
wlen = t->bits_per_word >> 3; /* in bytes */
while (count) {
+ if (qspi_is_busy(qspi))
+ return -EBUSY;
+
switch (wlen) {
case 1:
dev_dbg(qspi->dev, "tx cmd %08x dc %08x data %02x\n",
@@ -266,6 +285,9 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t)
while (count) {
dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc);
+ if (qspi_is_busy(qspi))
+ return -EBUSY;
+
ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG);
if (!wait_for_completion_timeout(&qspi->transfer_complete,
QSPI_COMPLETION_TIMEOUT)) {