summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/net
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2015-01-28 22:49:55 -0800
committerDavid S. Miller <davem@davemloft.net>2015-01-28 22:49:55 -0800
commitb8f8be3f043d6dba7d6c3426e4597d2ebf5a3547 (patch)
tree8f2b80088b24b7c5fb0aba4c6b3b45b5ca4a2bb2 /Documentation/devicetree/bindings/net
parentff660f75be36e6db75d45dc742a4a468c5a9c20d (diff)
parent0a5942c8e1480db4b8ee7a8d643e4945ef2f8fed (diff)
downloadkernel-b8f8be3f043d6dba7d6c3426e4597d2ebf5a3547.tar.gz
Merge tag 'nfc-next-3.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
NFC: 3.20 first pull request This is the first NFC pull request for 3.20. With this one we have: - Secure element support for the ST Micro st21nfca driver. This depends on a few HCI internal changes in order for example to support more than one secure element per controller. - ACPI support for NXP's pn544 HCI driver. This controller is found on many x86 SoCs and is typically enumerated on the ACPI bus there. - A few st21nfca and st21nfcb fixes. Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/devicetree/bindings/net')
-rw-r--r--Documentation/devicetree/bindings/net/nfc/st21nfca.txt11
-rw-r--r--Documentation/devicetree/bindings/net/nfc/st21nfcb.txt4
2 files changed, 11 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
index e4faa2e8dfeb..7bb2e213d6f9 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfca.txt
@@ -1,7 +1,7 @@
* STMicroelectronics SAS. ST21NFCA NFC Controller
Required properties:
-- compatible: Should be "st,st21nfca_i2c".
+- compatible: Should be "st,st21nfca-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
- interrupt-parent: phandle for the interrupt gpio controller
@@ -11,6 +11,10 @@ Required properties:
Optional SoC Specific Properties:
- pinctrl-names: Contains only one value - "default".
- pintctrl-0: Specifies the pin control groups used for this controller.
+- ese-present: Specifies that an ese is physically connected to the nfc
+controller.
+- uicc-present: Specifies that the uicc swp signal can be physically
+connected to the nfc controller.
Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
@@ -20,7 +24,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
st21nfca: st21nfca@1 {
- compatible = "st,st21nfca_i2c";
+ compatible = "st,st21nfca-i2c";
reg = <0x01>;
clock-frequency = <400000>;
@@ -29,5 +33,8 @@ Example (for ARM-based BeagleBoard xM with ST21NFCA on I2C2):
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+
+ ese-present;
+ uicc-present;
};
};
diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
index 9005608cbbd1..bb237072dbe9 100644
--- a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
+++ b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt
@@ -1,7 +1,7 @@
* STMicroelectronics SAS. ST21NFCB NFC Controller
Required properties:
-- compatible: Should be "st,st21nfcb_i2c".
+- compatible: Should be "st,st21nfcb-i2c".
- clock-frequency: I²C work frequency.
- reg: address on the bus
- interrupt-parent: phandle for the interrupt gpio controller
@@ -20,7 +20,7 @@ Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2):
st21nfcb: st21nfcb@8 {
- compatible = "st,st21nfcb_i2c";
+ compatible = "st,st21nfcb-i2c";
reg = <0x08>;
clock-frequency = <400000>;