summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-11-27 18:32:49 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-11-27 18:32:49 -0800
commit98e8d2e094de67315f786cd81b1dccb4ac040cc2 (patch)
tree39e3fe2ac83d2a4c9db53482b6aade94ff06d713
parent21f122f47205258e166479e1223898941c6aa6a1 (diff)
parent070e76cb3ffe43f6855492e77c96680c562598f0 (diff)
downloadkernel-98e8d2e094de67315f786cd81b1dccb4ac040cc2.tar.gz
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull mips fixes from Ralf Baechle: "The hopefully final round of fixes for 3.18: - Fix a number of build errors affecting particular configurations. - Handle EVA correctly when flushing a signal trampoline and dcache lines. - Fix printks printing jibberish. - Handle 64 bit memory addresses correctly when adding memory chunk on 32 bit kernels. - Fix a race condition in the hardware tablewalker code" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: tlbex: Fix potential HTW race on TLBL/M/S handlers MIPS: Fix address type used for early memory detection. MIPS: Kconfig: Don't allow both microMIPS and SmartMIPS to be selected. MIPS: kernel: cps-vec: Set ISA level to mips32r2 for the MIPS MT ASE MIPS: Netlogic: handle modular AHCI builds MIPS: Netlogic: handle modular USB case MIPS: Loongson: Make platform serial setup always built-in. MIPS: fix EVA & non-SMP non-FPU FP context signal handling MIPS: cpu-probe: Set the FTLB probability bit on supported cores MIPS: BMIPS: Fix ".previous without corresponding .section" warnings MIPS: uaccess.h: Fix strnlen_user comment. MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line MIPS: Fix info about plat_setup in arch_mem_init comment MIPS: rtlx: Remove KERN_DEBUG from pr_debug() arguments in rtlx.c MIPS: SEAD3: Fix LED device registration. MIPS: Fix a copy & paste error in unistd.h
-rw-r--r--arch/mips/Kconfig14
-rw-r--r--arch/mips/include/asm/mipsregs.h2
-rw-r--r--arch/mips/include/asm/r4kcache.h4
-rw-r--r--arch/mips/include/asm/uaccess.h6
-rw-r--r--arch/mips/include/uapi/asm/unistd.h2
-rw-r--r--arch/mips/kernel/bmips_vec.S3
-rw-r--r--arch/mips/kernel/cps-vec.S2
-rw-r--r--arch/mips/kernel/cpu-probe.c33
-rw-r--r--arch/mips/kernel/rtlx.c4
-rw-r--r--arch/mips/kernel/setup.c4
-rw-r--r--arch/mips/kernel/signal.c8
-rw-r--r--arch/mips/loongson/common/Makefile3
-rw-r--r--arch/mips/mm/tlbex.c10
-rw-r--r--arch/mips/mti-sead3/sead3-leds.c8
-rw-r--r--arch/mips/netlogic/xlp/Makefile12
15 files changed, 84 insertions, 31 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f43aa536c517..9536ef912f59 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2101,9 +2101,17 @@ config 64BIT_PHYS_ADDR
config ARCH_PHYS_ADDR_T_64BIT
def_bool 64BIT_PHYS_ADDR
+choice
+ prompt "SmartMIPS or microMIPS ASE support"
+
+config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS
+ bool "None"
+ help
+ Select this if you want neither microMIPS nor SmartMIPS support
+
config CPU_HAS_SMARTMIPS
depends on SYS_SUPPORTS_SMARTMIPS
- bool "Support for the SmartMIPS ASE"
+ bool "SmartMIPS"
help
SmartMIPS is a extension of the MIPS32 architecture aimed at
increased security at both hardware and software level for
@@ -2115,11 +2123,13 @@ config CPU_HAS_SMARTMIPS
config CPU_MICROMIPS
depends on SYS_SUPPORTS_MICROMIPS
- bool "Build kernel using microMIPS ISA"
+ bool "microMIPS"
help
When this option is enabled the kernel will be built using the
microMIPS ISA
+endchoice
+
config CPU_HAS_MSA
bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)"
depends on CPU_SUPPORTS_MSA
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index b46cd220a018..22a135ac91de 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -661,6 +661,8 @@
#define MIPS_CONF6_SYND (_ULCAST_(1) << 13)
/* proAptiv FTLB on/off bit */
#define MIPS_CONF6_FTLBEN (_ULCAST_(1) << 15)
+/* FTLB probability bits */
+#define MIPS_CONF6_FTLBP_SHIFT (16)
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index 4520adc8699b..cd6e0afc6833 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -257,7 +257,11 @@ static inline void protected_flush_icache_line(unsigned long addr)
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
+#ifdef CONFIG_EVA
+ protected_cachee_op(Hit_Writeback_Inv_D, addr);
+#else
protected_cache_op(Hit_Writeback_Inv_D, addr);
+#endif
}
static inline void protected_writeback_scache_line(unsigned long addr)
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 133678ab4eb8..22a5624e2fd2 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -1422,7 +1422,7 @@ static inline long __strnlen_user(const char __user *s, long n)
}
/*
- * strlen_user: - Get the size of a string in user space.
+ * strnlen_user: - Get the size of a string in user space.
* @str: The string to measure.
*
* Context: User context only. This function may sleep.
@@ -1431,9 +1431,7 @@ static inline long __strnlen_user(const char __user *s, long n)
*
* Returns the size of the string INCLUDING the terminating NUL.
* On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
+ * If the string is too long, returns a value greater than @n.
*/
static inline long strnlen_user(const char __user *s, long n)
{
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index 9dc58568f230..d001bb1ad177 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -1045,7 +1045,7 @@
#define __NR_seccomp (__NR_Linux + 316)
#define __NR_getrandom (__NR_Linux + 317)
#define __NR_memfd_create (__NR_Linux + 318)
-#define __NR_memfd_create (__NR_Linux + 319)
+#define __NR_bpf (__NR_Linux + 319)
/*
* Offset of the last N32 flavoured syscall
diff --git a/arch/mips/kernel/bmips_vec.S b/arch/mips/kernel/bmips_vec.S
index 290c23b51678..86495072a922 100644
--- a/arch/mips/kernel/bmips_vec.S
+++ b/arch/mips/kernel/bmips_vec.S
@@ -208,7 +208,6 @@ bmips_reset_nmi_vec_end:
END(bmips_reset_nmi_vec)
.set pop
- .previous
/***********************************************************************
* CPU1 warm restart vector (used for second and subsequent boots).
@@ -281,5 +280,3 @@ LEAF(bmips_enable_xks01)
jr ra
END(bmips_enable_xks01)
-
- .previous
diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S
index e6e97d2a5c9e..0384b05ab5a0 100644
--- a/arch/mips/kernel/cps-vec.S
+++ b/arch/mips/kernel/cps-vec.S
@@ -229,6 +229,7 @@ LEAF(mips_cps_core_init)
nop
.set push
+ .set mips32r2
.set mt
/* Only allow 1 TC per VPE to execute... */
@@ -345,6 +346,7 @@ LEAF(mips_cps_boot_vpes)
nop
.set push
+ .set mips32r2
.set mt
1: /* Enter VPE configuration state */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index d5a4f380b019..dc49cf30c2db 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -193,6 +193,32 @@ static void set_isa(struct cpuinfo_mips *c, unsigned int isa)
static char unknown_isa[] = KERN_ERR \
"Unsupported ISA type, c0.config0: %d.";
+static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
+{
+
+ unsigned int probability = c->tlbsize / c->tlbsizevtlb;
+
+ /*
+ * 0 = All TLBWR instructions go to FTLB
+ * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the
+ * FTLB and 1 goes to the VTLB.
+ * 2 = 7:1: As above with 7:1 ratio.
+ * 3 = 3:1: As above with 3:1 ratio.
+ *
+ * Use the linear midpoint as the probability threshold.
+ */
+ if (probability >= 12)
+ return 1;
+ else if (probability >= 6)
+ return 2;
+ else
+ /*
+ * So FTLB is less than 4 times bigger than VTLB.
+ * A 3:1 ratio can still be useful though.
+ */
+ return 3;
+}
+
static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
{
unsigned int config6;
@@ -203,9 +229,14 @@ static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
case CPU_P5600:
/* proAptiv & related cores use Config6 to enable the FTLB */
config6 = read_c0_config6();
+ /* Clear the old probability value */
+ config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
if (enable)
/* Enable FTLB */
- write_c0_config6(config6 | MIPS_CONF6_FTLBEN);
+ write_c0_config6(config6 |
+ (calculate_ftlb_probability(c)
+ << MIPS_CONF6_FTLBP_SHIFT)
+ | MIPS_CONF6_FTLBEN);
else
/* Disable FTLB */
write_c0_config6(config6 & ~MIPS_CONF6_FTLBEN);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 31b1b763cb29..c5c4fd54d797 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -94,12 +94,12 @@ int rtlx_open(int index, int can_sleep)
int ret = 0;
if (index >= RTLX_CHANNELS) {
- pr_debug(KERN_DEBUG "rtlx_open index out of range\n");
+ pr_debug("rtlx_open index out of range\n");
return -ENOSYS;
}
if (atomic_inc_return(&channel_wqs[index].in_open) > 1) {
- pr_debug(KERN_DEBUG "rtlx_open channel %d already opened\n", index);
+ pr_debug("rtlx_open channel %d already opened\n", index);
ret = -EBUSY;
goto out_fail;
}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index d21ec57b6e95..f3b635f86c39 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -485,7 +485,7 @@ static void __init bootmem_init(void)
* NOTE: historically plat_mem_setup did the entire platform initialization.
* This was rather impractical because it meant plat_mem_setup had to
* get away without any kind of memory allocator. To keep old code from
- * breaking plat_setup was just renamed to plat_setup and a second platform
+ * breaking plat_setup was just renamed to plat_mem_setup and a second platform
* initialization hook for anything else was introduced.
*/
@@ -493,7 +493,7 @@ static int usermem __initdata;
static int __init early_parse_mem(char *p)
{
- unsigned long start, size;
+ phys_t start, size;
/*
* If a user specifies memory size, we
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 1d57605e4615..16f1e4f2bf3c 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -658,13 +658,13 @@ static int signal_setup(void)
save_fp_context = _save_fp_context;
restore_fp_context = _restore_fp_context;
} else {
- save_fp_context = copy_fp_from_sigcontext;
- restore_fp_context = copy_fp_to_sigcontext;
+ save_fp_context = copy_fp_to_sigcontext;
+ restore_fp_context = copy_fp_from_sigcontext;
}
#endif /* CONFIG_SMP */
#else
- save_fp_context = copy_fp_from_sigcontext;;
- restore_fp_context = copy_fp_to_sigcontext;
+ save_fp_context = copy_fp_to_sigcontext;
+ restore_fp_context = copy_fp_from_sigcontext;
#endif
return 0;
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 0bb9cc9dc621..d87e03330b29 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -11,7 +11,8 @@ obj-$(CONFIG_PCI) += pci.o
# Serial port support
#
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_SERIAL_8250) += serial.o
+loongson-serial-$(CONFIG_SERIAL_8250) := serial.o
+obj-y += $(loongson-serial-m) $(loongson-serial-y)
obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index b5f228e7eae6..e3328a96e809 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1872,8 +1872,16 @@ build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l,
uasm_l_smp_pgtable_change(l, *p);
#endif
iPTE_LW(p, wr.r1, wr.r2); /* get even pte */
- if (!m4kc_tlbp_war())
+ if (!m4kc_tlbp_war()) {
build_tlb_probe_entry(p);
+ if (cpu_has_htw) {
+ /* race condition happens, leaving */
+ uasm_i_ehb(p);
+ uasm_i_mfc0(p, wr.r3, C0_INDEX);
+ uasm_il_bltz(p, r, wr.r3, label_leave);
+ uasm_i_nop(p);
+ }
+ }
return wr;
}
diff --git a/arch/mips/mti-sead3/sead3-leds.c b/arch/mips/mti-sead3/sead3-leds.c
index 20102a6d4141..c427c5778186 100644
--- a/arch/mips/mti-sead3/sead3-leds.c
+++ b/arch/mips/mti-sead3/sead3-leds.c
@@ -5,7 +5,7 @@
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
@@ -76,8 +76,4 @@ static int __init led_init(void)
return platform_device_register(&fled_device);
}
-module_init(led_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("LED probe driver for SEAD-3");
+device_initcall(led_init);
diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
index be358a8050c5..6b43af0a34d9 100644
--- a/arch/mips/netlogic/xlp/Makefile
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -1,6 +1,10 @@
obj-y += setup.o nlm_hal.o cop2-ex.o dt.o
obj-$(CONFIG_SMP) += wakeup.o
-obj-$(CONFIG_USB) += usb-init.o
-obj-$(CONFIG_USB) += usb-init-xlp2.o
-obj-$(CONFIG_SATA_AHCI) += ahci-init.o
-obj-$(CONFIG_SATA_AHCI) += ahci-init-xlp2.o
+ifdef CONFIG_USB
+obj-y += usb-init.o
+obj-y += usb-init-xlp2.o
+endif
+ifdef CONFIG_SATA_AHCI
+obj-y += ahci-init.o
+obj-y += ahci-init-xlp2.o
+endif