aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-06-03Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable() cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
2017-05-30cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable()Arvind Yadav
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-30cpufreq: cpufreq_register_driver() should return -ENODEV if init failsDavid Arcari
For a driver that does not set the CPUFREQ_STICKY flag, if all of the ->init() calls fail, cpufreq_register_driver() should return an error. This will prevent the driver from loading. Fixes: ce1bcfe94db8 (cpufreq: check cpufreq_policy_list instead of scanning policies for all CPUs) Cc: 4.0+ <stable@vger.kernel.org> # 4.0+ Signed-off-by: David Arcari <darcari@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-28Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC management fixes from Eduardo Valentin: - fixes to TI SoC driver, Broadcom, qoriq - small sparse warning fix on thermal core * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: broadcom: ns-thermal: default on iProc SoCs ti-soc-thermal: Fix a typo in a comment line ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build() ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build() thermal: core: make thermal_emergency_poweroff static thermal: qoriq: remove useless call for of_thermal_get_trip_points()
2017-05-27Merge tag 'tty-4.12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger than normal, which is why I had them bake in linux-next for a few weeks and didn't send them to you for -rc2. They revert a few of the serdev patches from 4.12-rc1, and bring things back to how they were in 4.11, to try to make things a bit more stable there. Rob and Johan both agree that this is the way forward, so this isn't people squabbling over semantics. Other than that, just a few minor serial driver fixes that people have had problems with. All of these have been in linux-next for a few weeks with no reported issues" * tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: altera_uart: call iounmap() at driver remove serial: imx: ensure UCR3 and UFCR are setup correctly MAINTAINERS/serial: Change maintainer of jsm driver serial: enable serdev support tty/serdev: add serdev registration interface serdev: Restore serdev_device_write_buf for atomic context serial: core: fix crash in uart_suspend_port tty: fix port buffer locking tty: ehv_bytechan: clean up init error handling serial: ifx6x60: fix use-after-free on module unload serial: altera_jtaguart: adding iounmap() serial: exar: Fix stuck MSIs serial: efm32: Fix parity management in 'efm32_uart_console_get_options()' serdev: fix tty-port client deregistration Revert "tty_port: register tty ports with serdev bus" drivers/tty: 8250: only call fintek_8250_probe when doing port I/O
2017-05-27Merge branch 'ras-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS fixes from Thomas Gleixner: "Two fixlets for RAS: - Export memory_error() so the NFIT module can utilize it - Handle memory errors in NFIT correctly" * 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: acpi, nfit: Fix the memory error check in nfit_handle_mce() x86/MCE: Export memory_error()
2017-05-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Just a few fixups to a couple of drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - ignore signals when finishing updating firmware Input: elan_i2c - clear INT before resetting controller Input: atmel_mxt_ts - add T100 as a readable object Input: edt-ft5x06 - increase allowed data range for threshold parameter
2017-05-26Merge tag 'led_fixes_for_4-12-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED fix from Jacek Anaszewski: "A single LED fix for 4.12-rc3. leds-pca955x driver uses only i2c_smbus API and thus it should pass I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality" * tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: Correct I2C Functionality
2017-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix state pruning in bpf verifier wrt. alignment, from Daniel Borkmann. 2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide Caratti. 3) Fix bit field definitions for rss_hash_type of descriptors in mlx5 driver, from Jesper Brouer. 4) Defer slave->link updates until bonding is ready to do a full commit to the new settings, from Nithin Sujir. 5) Properly reference count ipv4 FIB metrics to avoid use after free situations, from Eric Dumazet and several others including Cong Wang and Julian Anastasov. 6) Fix races in llc_ui_bind(), from Lin Zhang. 7) Fix regression of ESP UDP encapsulation for TCP packets, from Steffen Klassert. 8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap. 9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter Dawson. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add reference counting to metrics net: ethernet: ax88796: don't call free_irq without request_irq first ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets sctp: fix ICMP processing if skb is non-linear net: llc: add lock_sock in llc_ui_bind to avoid a race condition bonding: Don't update slave->link until ready to commit test_bpf: Add a couple of tests for BPF_JSGE. bpf: add various verifier test cases bpf: fix wrong exposure of map_flags into fdinfo for lpm bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data bpf: properly reset caller saved regs after helper call and ld_abs/ind bpf: fix incorrect pruning decision when alignment must be tracked arp: fixed -Wuninitialized compiler warning tcp: avoid fastopen API to be used on AF_UNSPEC net: move somaxconn init from sysctl code net: fix potential null pointer dereference geneve: fix fill_info when using collect_metadata virtio-net: enable TSO/checksum offloads for Q-in-Q vlans be2net: Fix offload features for Q-in-Q packets vlan: Fix tcp checksum offloads in Q-in-Q vlans ...
2017-05-26net: ethernet: ax88796: don't call free_irq without request_irq firstUwe Kleine-König
The function ax_init_dev (which is called only from the driver's .probe function) calls free_irq in the error path without having requested the irq in the first place. So drop the free_irq call in the error path. Fixes: 825a2ff1896e ("AX88796 network driver") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A collection of fixes that should go into this series. This contains: - A set of NVMe fixes, pulled from Christoph. This includes a set of fixes for the fiber channel bits from James Smart, rdma queue depth fix from Marta, controller removal fixes from Ming, and some more APST quirk updates from Andy. - A blk-mq debugfs fix from Bart, fixing a problem with the untangling of the sysfs and debugfs blk-mq bits that was added in this series. - Error code fix in add_partition() from Dan. - A small series of fixes for the new blk-throttle code from Shaohua" * 'for-linus' of git://git.kernel.dk/linux-block: (21 commits) blk-mq: Only register debugfs attributes for blk-mq queues nvme: Quirk APST on Intel 600P/P3100 devices nvme: only setup block integrity if supported by the driver nvme: replace is_flags field in nvme_ctrl_ops with a flags field nvme-pci: consistencly use ctrl->device for logging partitions/msdos: FreeBSD UFS2 file systems are not recognized block: fix an error code in add_partition() blk-throttle: force user to configure all settings for io.low blk-throttle: respect 0 bps/iops settings for io.low blk-throttle: output some debug info in trace blk-throttle: add hierarchy support for latency target and idle time nvme_fc: remove extra controller reference taken on reconnect nvme_fc: correct nvme status set on abort nvme_fc: set logging level on resets/deletes nvme_fc: revise comment on teardown nvme_fc: Support ctrl_loss_tmo nvme_fc: get rid of local reconnect_delay blk-mq: remove blk_mq_abort_requeue_list() nvme: avoid to use blk_mq_abort_requeue_list() nvme: use blk_mq_start_hw_queues() in nvme_kill_queues() ...
2017-05-26Merge tag 'pci-v4.12-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - fix PCI_ENDPOINT build error (merged for v4.12) - fix Switchtec driver (merged for v4.12) - fix imx6 config read timeouts, fallout from changing to non-postable reads - add PM "needs_resume" flag for i915 suspend issue * tag 'pci-v4.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/PM: Add needs_resume flag to avoid suspend complete optimization PCI: imx6: Fix config read timeout handling switchtec: Fix minor bug with partition ID register switchtec: Use new cdev_device_add() helper function PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMA
2017-05-26Merge tag 'mmc-v4.12-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "This contains fixes to make the WiFi work again for the ARM64 Hikey board. Together with a couple of DTS updates for the Hikey board we have also extended the mmc pwrseq_simple, to support a new power-off-delay-us DT property, as that was required to enable a graceful power off sequence for the WiFi chip" * tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: arm64: dts: hikey: Fix WiFi support arm64: dts: hi6220: Move board data from the dwmmc nodes to hikey dts arm64: dts: hikey: Add the SYS_5V and the VDD_3V3 regulators arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts arm64: dts: hikey: Add clock for the pmic mfd mfd: dts: hi655x: Add clock binding for the pmic mmc: pwrseq_simple: Parse DTS for the power-off-delay-us property mmc: dt: pwrseq-simple: Invent power-off-delay-us
2017-05-26Merge tag 'drm-fixes-for-v4.12-rc3' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Not a whole lot happening here, a set of amdgpu fixes and one core deadlock fix, and some misc drivers fixes" * tag 'drm-fixes-for-v4.12-rc3' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: fix null point error when rmmod amdgpu. drm/amd/powerplay: fix a signedness bugs drm/amdgpu: fix NULL pointer panic of emit_gds_switch drm/radeon: Unbreak HPD handling for r600+ drm/amd/powerplay/smu7: disable mclk switching for high refresh rates drm/amd/powerplay/smu7: add vblank check for mclk switching (v2) drm/radeon/ci: disable mclk switching for high refresh rates (v2) drm/amdgpu/ci: disable mclk switching for high refresh rates (v2) drm/amdgpu: fix fundamental suspend/resume issue drm/gma500/psb: Actually use VBT mode when it is found drm: Fix deadlock retry loop in page_flip_ioctl drm: qxl: Delay entering atomic context during cursor update drm/radeon: Fix oops upon driver load on PowerXpress laptops
2017-05-26nvme: Quirk APST on Intel 600P/P3100 devicesAndy Lutomirski
They have known firmware bugs. A fix is apparently in the works -- once fixed firmware is available, someone from Intel (Hi, Keith!) can adjust the quirk accordingly. Cc: stable@vger.kernel.org # v4.11 Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: Mario Limonciello <mario_limonciello@dell.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-26nvme: only setup block integrity if supported by the driverChristoph Hellwig
Currently only the PCIe driver supports metadata, so we should not claim integrity support for the other drivers. This prevents nasty crashes with targets that advertise metadata support on fabrics. Also use the opportunity to factor out some code into a separate helper that isn't even compiled if CONFIG_BLK_DEV_INTEGRITY is disabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-05-26nvme: replace is_flags field in nvme_ctrl_ops with a flags fieldChristoph Hellwig
So that we can have more flags for transport-specific behavior. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-05-26nvme-pci: consistencly use ctrl->device for loggingChristoph Hellwig
This is what most of the code already does and gives much more useful prefixes than the device embedded in the pci_dev. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com>
2017-05-26Merge branch 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes A bunch of bug fixes: - Fix display flickering on some chips at high refresh rates - suspend/resume fix - hotplug fix - a couple of segfault fixes for certain cases * 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: fix null point error when rmmod amdgpu. drm/amd/powerplay: fix a signedness bugs drm/amdgpu: fix NULL pointer panic of emit_gds_switch drm/radeon: Unbreak HPD handling for r600+ drm/amd/powerplay/smu7: disable mclk switching for high refresh rates drm/amd/powerplay/smu7: add vblank check for mclk switching (v2) drm/radeon/ci: disable mclk switching for high refresh rates (v2) drm/amdgpu/ci: disable mclk switching for high refresh rates (v2) drm/amdgpu: fix fundamental suspend/resume issue
2017-05-25bonding: Don't update slave->link until ready to commitNithin Sujir
In the loadbalance arp monitoring scheme, when a slave link change is detected, the slave->link is immediately updated and slave_state_changed is set. Later down the function, the rtnl_lock is acquired and the changes are committed, updating the bond link state. However, the acquisition of the rtnl_lock can fail. The next time the monitor runs, since slave->link is already updated, it determines that link is unchanged. This results in the bond link state permanently out of sync with the slave link. This patch modifies bond_loadbalance_arp_mon() to handle link changes identical to bond_ab_arp_{inspect/commit}(). The new link state is maintained in slave->new_link until we're ready to commit at which point it's copied into slave->link. NOTE: miimon_{inspect/commit}() has a more complex state machine requiring the use of the bond_{propose,commit}_link_state() functions which maintains the intermediate state in slave->link_new_state. The arp monitors don't require that. Testing: This bug is very easy to reproduce with the following steps. 1. In a loop, toggle a slave link of a bond slave interface. 2. In a separate loop, do ifconfig up/down of an unrelated interface to create contention for rtnl_lock. Within a few iterations, the bond link goes out of sync with the slave link. Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25Input: elan_i2c - ignore signals when finishing updating firmwareKT Liao
Use wait_for_completion_timeout() instead of wait_for_completion_interruptible_timeout() to avoid stray signals ruining firmware update. Our timeout is only 300 msec so we are fine simply letting it expire in case device misbehaves. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-25Input: elan_i2c - clear INT before resetting controllerKT Liao
Some old touchpad FWs need to have interrupt cleared before issuing reset command after updating firmware. We clear interrupt by attempting to read full report from the controller, and discarding any data read. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-25net: fix potential null pointer dereferenceGustavo A. R. Silva
Add null check to avoid a potential null pointer dereference. Addresses-Coverity-ID: 1408831 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25drm/amdgpu: fix null point error when rmmod amdgpu.Rex Zhu
this bug happened when amdgpu load failed. [ 75.740951] BUG: unable to handle kernel paging request at 00000000000031c0 [ 75.748167] IP: [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] [ 75.755774] PGD 0 [ 75.759185] Oops: 0000 [#1] SMP [ 75.762408] Modules linked in: amdgpu(OE-) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) eeepc_wmi(E) asus_wmi(E) sparse_keymap(E) intel_rapl(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) snd_hda_core(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) snd_hwdep(E) snd_pcm(E) snd_seq_midi(E) coretemp(E) kvm_intel(E) snd_seq_midi_event(E) snd_rawmidi(E) kvm(E) snd_seq(E) joydev(E) snd_seq_device(E) snd_timer(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) mei_me(E) ghash_clmulni_intel(E) snd(E) aesni_intel(E) mei(E) soundcore(E) aes_x86_64(E) shpchp(E) serio_raw(E) lrw(E) acpi_pad(E) gf128mul(E) glue_helper(E) ablk_helper(E) mac_hid(E) [ 75.835574] cryptd(E) parport_pc(E) ppdev(E) lp(E) nfsd(E) parport(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) mxm_wmi(E) psmouse(E) e1000e(E) ptp(E) pps_core(E) ahci(E) libahci(E) wmi(E) video(E) i2c_hid(E) hid(E) [ 75.858489] CPU: 5 PID: 1603 Comm: rmmod Tainted: G OE 4.9.0-custom #2 [ 75.866183] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 0901 08/31/2015 [ 75.875050] task: ffff88045d1bbb80 task.stack: ffffc90002de4000 [ 75.881094] RIP: 0010:[<ffffffffa064a0e0>] [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] [ 75.891238] RSP: 0018:ffffc90002de7d48 EFLAGS: 00010286 [ 75.896648] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000001 [ 75.903933] RDX: 0000000000000000 RSI: ffff88045d1bbb80 RDI: 0000000000000286 [ 75.911183] RBP: ffffc90002de7d50 R08: 0000000000000502 R09: 0000000000000004 [ 75.918449] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880464bf0000 [ 75.925675] R13: ffffffffa0853000 R14: 0000000000000000 R15: 0000564e44f88210 [ 75.932980] FS: 00007f13d5400700(0000) GS:ffff880476540000(0000) knlGS:0000000000000000 [ 75.941238] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 75.947088] CR2: 00000000000031c0 CR3: 000000045fd0b000 CR4: 00000000003406e0 [ 75.954332] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 75.961566] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 75.968834] Stack: [ 75.970881] ffff880464bf0000 ffffc90002de7d60 ffffffffa0636592 ffffc90002de7d80 [ 75.978454] ffffffffa059015f ffff880464bf0000 ffff880464bf0000 ffffc90002de7da8 [ 75.986076] ffffffffa0595216 ffff880464bf0000 ffff880460f4d000 ffffffffa0853000 [ 75.993692] Call Trace: [ 75.996177] [<ffffffffa0636592>] amdgpu_driver_lastclose_kms+0x12/0x20 [amdgpu] [ 76.003700] [<ffffffffa059015f>] drm_lastclose+0x2f/0xd0 [drm] [ 76.009777] [<ffffffffa0595216>] drm_dev_unregister+0x16/0xd0 [drm] [ 76.016255] [<ffffffffa0595944>] drm_put_dev+0x34/0x70 [drm] [ 76.022139] [<ffffffffa062f365>] amdgpu_pci_remove+0x15/0x20 [amdgpu] [ 76.028800] [<ffffffff81416499>] pci_device_remove+0x39/0xc0 [ 76.034661] [<ffffffff81531caa>] __device_release_driver+0x9a/0x140 [ 76.041121] [<ffffffff81531e58>] driver_detach+0xb8/0xc0 [ 76.046575] [<ffffffff81530c95>] bus_remove_driver+0x55/0xd0 [ 76.052401] [<ffffffff815325fc>] driver_unregister+0x2c/0x50 [ 76.058244] [<ffffffff81416289>] pci_unregister_driver+0x29/0x90 [ 76.064466] [<ffffffffa0596c5e>] drm_pci_exit+0x9e/0xb0 [drm] [ 76.070507] [<ffffffffa0796d71>] amdgpu_exit+0x1c/0x32 [amdgpu] [ 76.076609] [<ffffffff81104810>] SyS_delete_module+0x1a0/0x200 [ 76.082627] [<ffffffff810e2b1a>] ? rcu_eqs_enter.isra.36+0x4a/0x50 [ 76.089001] [<ffffffff8100392e>] do_syscall_64+0x6e/0x180 [ 76.094583] [<ffffffff817e1d2f>] entry_SYSCALL64_slow_path+0x25/0x25 [ 76.101114] Code: 94 c0 c3 31 c0 5d c3 0f 1f 40 00 0f 1f 44 00 00 55 31 c0 48 89 e5 53 48 89 fb 48 c7 c7 1d 21 84 a0 e8 ab 77 b3 e0 e8 fc 8b d7 e0 <48> 8b bb c0 31 00 00 48 85 ff 74 09 e8 ff eb fc ff 85 c0 75 03 [ 76.121432] RIP [<ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu] Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-25geneve: fix fill_info when using collect_metadataEric Garver
Since 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") fill_info does not return UDP_ZERO_CSUM6_RX when using COLLECT_METADATA. This is because it uses ip_tunnel_info_af() with the device level info, which is not valid for COLLECT_METADATA. Fix by checking for the presence of the actual sockets. Fixes: 9b4437a5b870 ("geneve: Unify LWT and netdev handling.") Signed-off-by: Eric Garver <e@erig.me> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25serial: altera_uart: call iounmap() at driver removeTobias Klauser
The driver calls ioremap() in the probe function but doesn't call iounmap() in the remove function correspondingly. Do so now. Follow commit 5c9d6abed9e0 ("serial: altera_jtaguart: adding iounmap()") Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-25serial: imx: ensure UCR3 and UFCR are setup correctlyUwe Kleine-König
Commit e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off") has a flaw: While UCR3 and UFCR were modified using read-modify-write before it switched to write register values independent of the previous state. That's a good idea in principle (and that's why I did it) but needs more care. This patch reinstates read-modify-write for UFCR and for UCR3 ensures that RXDMUXSEL and ADNIMP are set for post imx1. Fixes: e61c38d85b73 ("serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Mika Penttilä <mika.penttila@nextfour.com> Tested-by: Mika Penttilä <mika.penttila@nextfour.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Tested-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is quite a big update because it includes a rework of the lpfc driver to separate the NVMe part from the FC part. The reason for doing this is because two separate trees (the nvme and scsi trees respectively) want to update the individual components and this separation will prevent a really nasty cross tree entanglement by the time we reach the next merge window. The rest of the fixes are the usual minor sort with no significant security implications" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (25 commits) scsi: zero per-cmd private driver data for each MQ I/O scsi: csiostor: fix use after free in csio_hw_use_fwconfig() scsi: ufs: Clean up some rpm/spm level SysFS nodes upon remove scsi: lpfc: fix build issue if NVME_FC_TARGET is not defined scsi: lpfc: Fix NULL pointer dereference during PCI error recovery scsi: lpfc: update version to 11.2.0.14 scsi: lpfc: Add MDS Diagnostic support. scsi: lpfc: Fix NVMEI's handling of NVMET's PRLI response attributes scsi: lpfc: Cleanup entry_repost settings on SLI4 queues scsi: lpfc: Fix debugfs root inode "lpfc" not getting deleted on driver unload. scsi: lpfc: Fix NVME I+T not registering NVME as a supported FC4 type scsi: lpfc: Added recovery logic for running out of NVMET IO context resources scsi: lpfc: Separate NVMET RQ buffer posting from IO resources SGL/iocbq/context scsi: lpfc: Separate NVMET data buffer pool fir ELS/CT. scsi: lpfc: Fix NMI watchdog assertions when running nvmet IOPS tests scsi: lpfc: Fix NVMEI driver not decrementing counter causing bad rport state. scsi: lpfc: Fix nvmet RQ resource needs for large block writes. scsi: lpfc: Adding additional stats counters for nvme. scsi: lpfc: Fix system crash when port is reset. scsi: lpfc: Fix used-RPI accounting problem. ...
2017-05-24drm/amd/powerplay: fix a signedness bugsDan Carpenter
Smatch complains about a signedness bug here: vega10_hwmgr.c:4202 vega10_force_clock_level() warn: always true condition '(i >= 0) => (0-u32max >= 0)' Fixes: 7b52db39a4c2 ("drm/amd/powerplay: fix bug sclk/mclk level can't be set on vega10.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Huang <JinHuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/amdgpu: fix NULL pointer panic of emit_gds_switchChunming Zhou
[ 338.384770] BUG: unable to handle kernel NULL pointer dereference at (null) [ 338.384817] IP: [< (null)>] (null) [ 338.385505] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 338.385950] Call Trace: [ 338.385993] [<ffffffffa05d2313>] ? amdgpu_vm_flush+0x283/0x400 [amdgpu] [ 338.386025] [<ffffffff811818d3>] ? printk+0x4d/0x4f [ 338.386074] [<ffffffffa05d4906>] amdgpu_ib_schedule+0x4a6/0x4d0 [amdgpu] [ 338.386140] [<ffffffffa0673e54>] amdgpu_job_run+0x64/0x180 [amdgpu] [ 338.386203] [<ffffffffa0672e09>] amd_sched_main+0x2e9/0x4a0 [amdgpu] [ 338.386232] [<ffffffff810bfce0>] ? prepare_to_wait_event+0x110/0x110 [ 338.386295] [<ffffffffa0672b20>] ? amd_sched_select_entity+0xe0/0xe0 [amdgpu] [ 338.386327] [<ffffffff8109b423>] kthread+0xd3/0xf0 [ 338.386349] [<ffffffff8109b350>] ? kthread_park+0x60/0x60 [ 338.386376] [<ffffffff817e1ee5>] ret_from_fork+0x25/0x30 [ 338.386401] Code: Bad RIP value. [ 338.386420] RIP [< (null)>] (null) [ 338.386443] RSP <ffffc90001bd7d40> [ 338.386458] CR2: 0000000000000000 [ 338.398508] ---[ end trace 4c66fcdc74b9a0a2 ]--- Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/radeon: Unbreak HPD handling for r600+Lyude
We end up reading the interrupt register for HPD5, and then writing it to HPD6 which on systems without anything using HPD5 results in permanently disabling hotplug on one of the display outputs after the first time we acknowledge a hotplug interrupt from the GPU. This code is really bad. But for now, let's just fix this. I will hopefully have a large patch series to refactor all of this soon. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Lyude <lyude@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/amd/powerplay/smu7: disable mclk switching for high refresh ratesAlex Deucher
Even if the vblank period would allow it, it still seems to be problematic on some cards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)Alex Deucher
Check to make sure the vblank period is long enough to support mclk switching. v2: drop needless initial assignment (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/radeon/ci: disable mclk switching for high refresh rates (v2)Alex Deucher
Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)Alex Deucher
Even if the vblank period would allow it, it still seems to be problematic on some cards. v2: fix logic inversion (Nils) bug: https://bugs.freedesktop.org/show_bug.cgi?id=96868 Cc: stable@vger.kernel.org Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-05-24virtio-net: enable TSO/checksum offloads for Q-in-Q vlansVlad Yasevich
Since virtio does not provide it's own ndo_features_check handler, TSO, and now checksum offload, are disabled for stacked vlans. Re-enable the support and let the host take care of it. This restores/improves Guest-to-Guest performance over Q-in-Q vlans. Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24be2net: Fix offload features for Q-in-Q packetsVlad Yasevich
At least some of the be2net cards do not seem to be capabled of performing checksum offload computions on Q-in-Q packets. In these case, the recevied checksum on the remote is invalid and TCP syn packets are dropped. This patch adds a call to check disbled acceleration features on Q-in-Q tagged traffic. CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24drm/amdgpu: fix fundamental suspend/resume issueChristian König
Reinitializing the VM manager during suspend/resume is a very very bad idea since all the VMs are still active and kicking. This can lead to random VM faults after resume when new processes become the same client ID assigned. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-05-24net: phy: marvell: Limit errata to 88m1101Andrew Lunn
The 88m1101 has an errata when configuring autoneg. However, it was being applied to many other Marvell PHYs as well. Limit its scope to just the 88m1101. Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145") Reported-by: Daniel Walker <danielwa@cisco.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Harini Katakam <harinik@xilinx.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24net/phy: fix mdio-octeon dependency and buildRandy Dunlap
Fix build errors by making this driver depend on OF_MDIO, like several other similar drivers do. drivers/built-in.o: In function `octeon_mdiobus_remove': mdio-octeon.c:(.text+0x196ee0): undefined reference to `mdiobus_unregister' mdio-octeon.c:(.text+0x196ee8): undefined reference to `mdiobus_free' drivers/built-in.o: In function `octeon_mdiobus_probe': mdio-octeon.c:(.text+0x196f1d): undefined reference to `devm_mdiobus_alloc_size' mdio-octeon.c:(.text+0x196ffe): undefined reference to `of_mdiobus_register' mdio-octeon.c:(.text+0x197010): undefined reference to `mdiobus_free' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24Merge tag 'mlx5-fixes-2017-05-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2017-05-23 Some TC offloads fixes from Or Gerlitz. From Erez, mlx5 IPoIB RX fix to improve GRO. From Mohamad, Command interface fix to improve mitigation against FW commands timeouts. From Tariq, Driver load Tolerance against affinity settings failures. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24net: fec: add post PHY reset delay DT propertyQuentin Schulz
Some PHY require to wait for a bit after the reset GPIO has been toggled. This adds support for the DT property `phy-reset-post-delay` which gives the delay in milliseconds to wait after reset. If the DT property is not given, no delay is observed. Post reset delay greater than 1000ms are invalid. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24Merge tag 'mmc-v4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v4.12 rc3: - sdhci-xenon: Don't free data for phy allocated by devm* - sdhci-iproc: Suppress spurious interrupts - cavium: Fix probing race with regulator - cavium: Prevent crash with incomplete DT - cavium-octeon: Use proper GPIO name for power control - cavium-octeon: Fix interrupt enable code" * tag 'mmc-v4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-iproc: suppress spurious interrupt with Multiblock read mmc: cavium: Fix probing race with regulator of/platform: Make of_platform_device_destroy globally visible mmc: cavium: Prevent crash with incomplete DT mmc: cavium-octeon: Use proper GPIO name for power control mmc: cavium-octeon: Fix interrupt enable code mmc: sdhci-xenon: kill xenon_clean_phy()
2017-05-23thermal: broadcom: ns-thermal: default on iProc SoCsJon Mason
Tweak the Kconfig description to mention support for NSP and make the default on for iProc based platforms. Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Fix a typo in a comment lineMarkus Elfring
Add a missing character in this description for a function. Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Delete error messages for failed memory allocations in ↵Markus Elfring
ti_bandgap_build() The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus remove such statements here. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()Markus Elfring
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". This issue was detected by using the Coccinelle software. Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23thermal: core: make thermal_emergency_poweroff staticColin Ian King
Making thermal_emergency_poweroff static fixes sparse warning: drivers/thermal/thermal_core.c:6: warning: symbol 'thermal_emergency_poweroff' was not declared. Should it be static? Fixes: ef1d87e06ab4 ("thermal: core: Add a back up thermal shutdown mechanism") Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23thermal: qoriq: remove useless call for of_thermal_get_trip_points()Masahiro Yamada
Building this driver with W=1 reports: warning: variable 'trip' set but not used [-Wunused-but-set-variable] The call for of_thermal_get_trip_points() is useless. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23drm/gma500/psb: Actually use VBT mode when it is foundPatrik Jakobsson
With LVDS we were incorrectly picking the pre-programmed mode instead of the prefered mode provided by VBT. Make sure we pick the VBT mode if one is provided. It is likely that the mode read-out code is still wrong but this patch fixes the immediate problem on most machines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78562 Cc: <stable@vger.kernel.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170418114332.12183-1-patrik.r.jakobsson@gmail.com