aboutsummaryrefslogtreecommitdiff
path: root/drivers/cpufreq/qoriq-cpufreq.c
AgeCommit message (Collapse)Author
2017-03-12cpufreq: qoriq: enhance bus frequency calculationYuanTian Tang
On some platforms, property device-type may be missed in soc node in dts which caused the bus-frequency can not be obtained correctly. This patch enhanced the bus-frequency calculation. When property device-type is missed in dts, bus-frequency will be obtained by looking up clock table to get platform clock and hence get its frequency. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-23cpufreq: qoriq: clean up unused codeTang Yuantian
This snip code is not needed anymore since its user get_hard_smp_processor_id() has been removed. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-09cpufreq: qoriq: Don't look at clock implementation detailsTang Yuantian
Get the CPU clock's potential parent clocks from the clock interface itself, rather than manually parsing the clocks property to find a phandle, looking at the clock-names property of that, and assuming that those are valid parent clocks for the cpu clock. This is necessary now that the clocks are generated based on the clock driver's knowledge of the chip rather than a fragile device-tree description of the mux options. We can now rely on the clock driver to ensure that the mux only exposes options that are valid. The cpufreq driver was currently being overly conservative in some cases -- for example, the "min_cpufreq = get_bus_freq()" restriction only applies to chips with erratum A-004510, and whether the freq_mask used on p5020 is needed depends on the actual frequencies of the PLLs (FWIW, p5040 has a similar limitation but its .freq_mask was zero) -- and the frequency mask mechanism made assumptions about particular parent clock indices that are no longer valid. Signed-off-by: Scott Wood <scottwood@nxp.com> Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: qoriq: Fix cooling device registration issue during suspendJia Hongtao
Cooling device is registered by ready callback. It's also invoked while system resuming from sleep (Enabling non-boot cpus). Thus cooling device may be multiple registered. Matchable unregistration is added to exit callback to fix this issue. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: qoriq: Remove __exit macro from .exit callbackJia Hongtao
.exit callback (qoriq_cpufreq_cpu_exit()) is also used during suspend. So __exit macro should be removed or the function will be discarded. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-25cpufreq: qoriq: Don't show cooling device messages if THERMAL_OF undefinedJia Hongtao
When THERMAL_OF is undefined the cooling device messages should not be shown. -ENOSYS is returned from of_cpufreq_cooling_register() when THERMAL_OF is undefined. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-10cpufreq: qoriq: Register cooling device based on device treeHongtao Jia
Register the qoriq cpufreq driver as a cooling device, based on the thermal device tree framework. When temperature crosses the passive trip point cpufreq is used to throttle CPUs. Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-15cpufreq: qoriq: optimize the CPU frequency switching timeTang Yuantian
Each time the CPU switches its frequency, the clock nodes in DTS are walked through to find proper clock source. This is very time-consuming, for example, it is up to 500+ us on T4240. Besides, switching time varies from clock to clock. To optimize this, each input clock of CPU is buffered, so that it can be picked up instantly when needed. Since for each CPU each input clock is stored in a pointer which takes 4 or 8 bytes memory and normally there are several input clocks per CPU, that will not take much memory as well. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-11cpufreq: fix qoriq uniprocessor buildArnd Bergmann
The qoriq-cpufreq driver contains a hack for powerpc to include asm/smp.h on uniprocessor builds so it can get the hardware CPU number. On ARM, it does not require this hack, but instead gets a compile error: In file included from drivers/cpufreq/qoriq-cpufreq.c:24:0: arch/arm/include/asm/smp.h:18:3: error: #error "<asm/smp.h> included in non-SMP build" arch/arm/include/asm/smp.h:21:0: warning: "raw_smp_processor_id" redefined This adds an #ifdef to mirror the one in its get_cpu_physical_id() function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 2f249358eedaf ("cpufreq: qoriq: rename the driver") Cc: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-03-18cpufreq: qoriq: rename the driverTang Yuantian
This driver works on all QorIQ platforms which include ARM-based cores and PPC-based cores. Rename it in order to represent better. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>