aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--bl1/aarch64/bl1_exceptions.S12
-rw-r--r--bl1/bl1_main.c76
-rw-r--r--bl2/bl2_main.c132
-rw-r--r--bl31/aarch64/bl31_entrypoint.S10
-rw-r--r--bl31/bl31_main.c8
-rw-r--r--common/bl_common.c53
-rw-r--r--include/bl2/bl2.h28
-rw-r--r--include/bl31/bl31.h4
-rw-r--r--include/common/bl_common.h135
-rw-r--r--plat/fvp/bl1_plat_setup.c14
-rw-r--r--plat/fvp/bl2_plat_setup.c207
-rw-r--r--plat/fvp/bl31_plat_setup.c33
-rw-r--r--plat/fvp/platform.h64
-rw-r--r--services/spd/tspd/tspd_main.c6
14 files changed, 547 insertions, 235 deletions
diff --git a/bl1/aarch64/bl1_exceptions.S b/bl1/aarch64/bl1_exceptions.S
index 3613b9f..8ab9df8 100644
--- a/bl1/aarch64/bl1_exceptions.S
+++ b/bl1/aarch64/bl1_exceptions.S
@@ -117,7 +117,7 @@ SynchronousExceptionA64:
* BL1 to pass EL3 control to BL31 is expected
* here.
* It expects X0 with RUN_IMAGE SMC function id
- * X1 with address of a el_change_info_t structure
+ * X1 with address of a entry_point_info_t structure
* describing the BL3-1 entrypoint
* ------------------------------------------------
*/
@@ -136,7 +136,7 @@ SynchronousExceptionA64:
mov x0, x20
bl display_boot_progress
- ldp x0, x1, [x20, #EL_CHANGE_INFO_PC_OFFSET]
+ ldp x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET]
msr elr_el3, x0
msr spsr_el3, x1
ubfx x0, x1, #MODE_EL_SHIFT, #2
@@ -146,10 +146,10 @@ SynchronousExceptionA64:
bl disable_mmu_icache_el3
tlbi alle3
- ldp x6, x7, [x20, #(EL_CHANGE_INFO_ARGS_OFFSET + 0x30)]
- ldp x4, x5, [x20, #(EL_CHANGE_INFO_ARGS_OFFSET + 0x20)]
- ldp x2, x3, [x20, #(EL_CHANGE_INFO_ARGS_OFFSET + 0x10)]
- ldp x0, x1, [x20, #(EL_CHANGE_INFO_ARGS_OFFSET + 0x0)]
+ ldp x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)]
+ ldp x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)]
+ ldp x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)]
+ ldp x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)]
eret
panic:
mov x0, #SYNC_EXCEPTION_AARCH64
diff --git a/bl1/bl1_main.c b/bl1/bl1_main.c
index 80e52ca..da81839 100644
--- a/bl1/bl1_main.c
+++ b/bl1/bl1_main.c
@@ -33,6 +33,7 @@
#include <assert.h>
#include <bl_common.h>
#include <bl1.h>
+#include <debug.h>
#include <platform.h>
#include <stdio.h>
#include "bl1_private.h"
@@ -41,18 +42,18 @@
* Runs BL2 from the given entry point. It results in dropping the
* exception level
******************************************************************************/
-static void __dead2 bl1_run_bl2(el_change_info_t *bl2_ep)
+static void __dead2 bl1_run_bl2(entry_point_info_t *bl2_ep)
{
bl1_arch_next_el_setup();
/* Tell next EL what we want done */
bl2_ep->args.arg0 = RUN_IMAGE;
- if (bl2_ep->security_state == NON_SECURE)
- change_security_state(bl2_ep->security_state);
+ if (GET_SECURITY_STATE(bl2_ep->h.attr) == NON_SECURE)
+ change_security_state(GET_SECURITY_STATE(bl2_ep->h.attr));
write_spsr_el3(bl2_ep->spsr);
- write_elr_el3(bl2_ep->entrypoint);
+ write_elr_el3(bl2_ep->pc);
eret(bl2_ep->args.arg0,
bl2_ep->args.arg1,
@@ -77,11 +78,12 @@ void bl1_main(void)
#if DEBUG
unsigned long sctlr_el3 = read_sctlr_el3();
#endif
- unsigned long bl2_base;
unsigned int load_type = TOP_LOAD;
+ image_info_t bl2_image_info = { {0} };
+ entry_point_info_t bl2_ep = { {0} };
meminfo_t *bl1_tzram_layout;
meminfo_t *bl2_tzram_layout = 0x0;
- el_change_info_t bl2_ep = {0};
+ int err;
/*
* Ensure that MMU/Caches and coherency are turned on
@@ -100,15 +102,28 @@ void bl1_main(void)
printf(FIRMWARE_WELCOME_STR);
printf("%s\n\r", build_message);
+ SET_PARAM_HEAD(&bl2_image_info, PARAM_IMAGE_BINARY, VERSION_1, 0);
+ SET_PARAM_HEAD(&bl2_ep, PARAM_EP, VERSION_1, 0);
+
/*
* Find out how much free trusted ram remains after BL1 load
* & load the BL2 image at its top
*/
bl1_tzram_layout = bl1_plat_sec_mem_layout();
- bl2_base = load_image(bl1_tzram_layout,
+ err = load_image(bl1_tzram_layout,
(const char *) BL2_IMAGE_NAME,
- load_type, BL2_BASE);
-
+ load_type,
+ BL2_BASE,
+ &bl2_image_info,
+ &bl2_ep);
+ if (err) {
+ /*
+ * TODO: print failure to load BL2 but also add a tzwdog timer
+ * which will reset the system eventually.
+ */
+ printf("Failed to load boot loader stage 2 (BL2) firmware.\n");
+ panic();
+ }
/*
* Create a new layout of memory for BL2 as seen by BL1 i.e.
* tell it the amount of total and free memory available.
@@ -120,29 +135,20 @@ void bl1_main(void)
init_bl2_mem_layout(bl1_tzram_layout,
bl2_tzram_layout,
load_type,
- bl2_base);
-
- if (bl2_base) {
- bl2_ep.spsr =
- SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
- bl2_ep.entrypoint = bl2_base;
- bl2_ep.security_state = SECURE;
- bl2_ep.args.arg1 = (unsigned long)bl2_tzram_layout;
- printf("Booting trusted firmware boot loader stage 2\n\r");
+ bl2_image_info.image_base);
+
+ bl1_plat_set_bl2_ep_info(&bl2_image_info, &bl2_ep);
+ bl2_ep.args.arg1 = (unsigned long)bl2_tzram_layout;
+ printf("Booting trusted firmware boot loader stage 2\n");
#if DEBUG
- printf("BL2 address = 0x%llx \n\r", (unsigned long long) bl2_base);
- printf("BL2 cpsr = 0x%x \n\r", bl2_ep.spsr);
- printf("BL2 memory layout address = 0x%llx \n\r",
- (unsigned long long) bl2_tzram_layout);
+ printf("BL2 address = 0x%llx\n",
+ (unsigned long long) bl2_ep.pc);
+ printf("BL2 cpsr = 0x%x\n", bl2_ep.spsr);
+ printf("BL2 memory layout address = 0x%llx\n",
+ (unsigned long long) bl2_tzram_layout);
#endif
- bl1_run_bl2(&bl2_ep);
- }
+ bl1_run_bl2(&bl2_ep);
- /*
- * TODO: print failure to load BL2 but also add a tzwdog timer
- * which will reset the system eventually.
- */
- printf("Failed to load boot loader stage 2 (BL2) firmware.\n\r");
return;
}
@@ -150,16 +156,16 @@ void bl1_main(void)
* Temporary function to print the fact that BL2 has done its job and BL31 is
* about to be loaded. This is needed as long as printfs cannot be used
******************************************************************************/
-void display_boot_progress(el_change_info_t *bl31_ep_info)
+void display_boot_progress(entry_point_info_t *bl31_ep_info)
{
printf("Booting trusted firmware boot loader stage 3\n\r");
#if DEBUG
- printf("BL31 address = 0x%llx\n",
- (unsigned long long)bl31_ep_info->entrypoint);
- printf("BL31 cpsr = 0x%llx\n",
- (unsigned long long)bl31_ep_info->spsr);
- printf("BL31 args address = 0x%llx\n",
+ printf("BL31 address = 0x%llx\n", (unsigned long long)bl31_ep_info->pc);
+ printf("BL31 cpsr = 0x%llx\n", (unsigned long long)bl31_ep_info->spsr);
+ printf("BL31 params address = 0x%llx\n",
(unsigned long long)bl31_ep_info->args.arg0);
+ printf("BL31 plat params address = 0x%llx\n",
+ (unsigned long long)bl31_ep_info->args.arg1);
#endif
return;
}
diff --git a/bl2/bl2_main.c b/bl2/bl2_main.c
index 6da5c83..1969981 100644
--- a/bl2/bl2_main.c
+++ b/bl2/bl2_main.c
@@ -42,20 +42,18 @@
* Runs BL31 from the given entry point. It jumps to a higher exception level
* through an SMC.
******************************************************************************/
-static void __dead2 bl2_run_bl31(bl31_args_t *bl2_to_bl31_args,
+static void __dead2 bl2_run_bl31(entry_point_info_t *bl31_ep_info,
unsigned long arg1,
unsigned long arg2)
{
- /* Set the args pointers for X0 and X1 to BL31 */
- bl2_to_bl31_args->bl31_image_info.args.arg0 = arg1;
- bl2_to_bl31_args->bl31_image_info.args.arg1 = arg2;
+ /* Set the args pointer */
+ bl31_ep_info->args.arg0 = arg1;
+ bl31_ep_info->args.arg1 = arg2;
- /* Flush the entire BL31 args buffer */
- flush_dcache_range((unsigned long) bl2_to_bl31_args,
- sizeof(*bl2_to_bl31_args));
+ /* Flush the params to be passed to memory */
+ bl2_plat_flush_bl31_params();
- smc(RUN_IMAGE, (unsigned long)&bl2_to_bl31_args->bl31_image_info,
- 0, 0, 0, 0, 0, 0);
+ smc(RUN_IMAGE, (unsigned long)bl31_ep_info, 0, 0, 0, 0, 0, 0);
}
@@ -68,9 +66,11 @@ static void __dead2 bl2_run_bl31(bl31_args_t *bl2_to_bl31_args,
void bl2_main(void)
{
meminfo_t *bl2_tzram_layout;
- bl31_args_t *bl2_to_bl31_args;
- unsigned long bl31_base, bl32_base = 0, bl33_base, el_status;
- unsigned int bl2_load, bl31_load, mode;
+ bl31_params_t *bl2_to_bl31_params;
+ bl31_plat_params_t *bl2_to_bl31_plat_params;
+ unsigned int bl2_load, bl31_load;
+ entry_point_info_t *bl31_ep_info;
+ int e;
/* Perform remaining generic architectural setup in S-El1 */
bl2_arch_setup();
@@ -84,6 +84,14 @@ void bl2_main(void)
bl2_tzram_layout = bl2_plat_sec_mem_layout();
/*
+ * Get a pointer to the memory the platform has set aside to pass
+ * information to BL31.
+ */
+ bl2_to_bl31_params = bl2_plat_get_bl31_params();
+ bl2_to_bl31_plat_params = bl2_plat_get_bl31_plat_params();
+ bl31_ep_info = bl2_plat_get_bl31_ep_info();
+
+ /*
* Load BL31. BL1 tells BL2 whether it has been TOP or BOTTOM loaded.
* To avoid fragmentation of trusted SRAM memory, BL31 is always
* loaded opposite to BL2. This allows BL31 to reclaim BL2 memory
@@ -92,67 +100,45 @@ void bl2_main(void)
bl2_load = bl2_tzram_layout->attr & LOAD_MASK;
assert((bl2_load == TOP_LOAD) || (bl2_load == BOT_LOAD));
bl31_load = (bl2_load == TOP_LOAD) ? BOT_LOAD : TOP_LOAD;
- bl31_base = load_image(bl2_tzram_layout, BL31_IMAGE_NAME,
- bl31_load, BL31_BASE);
+ e = load_image(bl2_tzram_layout,
+ BL31_IMAGE_NAME,
+ bl31_load,
+ BL31_BASE,
+ bl2_to_bl31_params->bl31_image_info,
+ bl31_ep_info);
/* Assert if it has not been possible to load BL31 */
- if (bl31_base == 0) {
+ if (e) {
ERROR("Failed to load BL3-1.\n");
panic();
}
- /*
- * Get a pointer to the memory the platform has set aside to pass
- * information to BL31.
- */
- bl2_to_bl31_args = bl2_get_bl31_args_ptr();
-
- bl2_to_bl31_args->bl31_image_info.entrypoint = bl31_base;
- bl2_to_bl31_args->bl31_image_info.spsr =
- SPSR_64(MODE_EL3, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ bl2_plat_set_bl31_ep_info(bl2_to_bl31_params->bl31_image_info,
+ bl31_ep_info);
/*
* Create a new layout of memory for BL31 as seen by BL2. This
* will gobble up all the BL2 memory.
*/
init_bl31_mem_layout(bl2_tzram_layout,
- &bl2_to_bl31_args->bl31_meminfo,
+ &bl2_to_bl31_plat_params->bl31_meminfo,
bl31_load);
/* Load the BL33 image in non-secure memory provided by the platform */
- bl33_base = load_image(&bl2_to_bl31_args->bl33_meminfo,
- BL33_IMAGE_NAME,
- BOT_LOAD,
- plat_get_ns_image_entrypoint());
+ e = load_image(&bl2_to_bl31_plat_params->bl33_meminfo,
+ BL33_IMAGE_NAME,
+ BOT_LOAD,
+ plat_get_ns_image_entrypoint(),
+ bl2_to_bl31_params->bl33_image_info,
+ bl2_to_bl31_params->bl33_ep_info);
+
/* Halt if failed to load normal world firmware. */
- if (bl33_base == 0) {
+ if (e) {
ERROR("Failed to load BL3-3.\n");
panic();
}
-
- /*
- * BL2 also needs to tell BL31 where the non-trusted software image
- * is located.
- */
- bl2_to_bl31_args->bl33_image_info.entrypoint = bl33_base;
-
- /* Figure out what mode we enter the non-secure world in */
- el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
- el_status &= ID_AA64PFR0_ELX_MASK;
-
- if (el_status)
- mode = MODE_EL2;
- else
- mode = MODE_EL1;
-
- /*
- * TODO: Consider the possibility of specifying the SPSR in
- * the FIP ToC and allowing the platform to have a say as
- * well.
- */
- bl2_to_bl31_args->bl33_image_info.spsr =
- SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
- bl2_to_bl31_args->bl33_image_info.security_state = NON_SECURE;
+ bl2_plat_set_bl33_ep_info(bl2_to_bl31_params->bl33_image_info,
+ bl2_to_bl31_params->bl33_ep_info);
/*
* Load the BL32 image if there's one. It is upto to platform
@@ -161,29 +147,31 @@ void bl2_main(void)
* completely different memory. A zero size indicates that the
* platform does not want to load a BL32 image.
*/
- if (bl2_to_bl31_args->bl32_meminfo.total_size)
- bl32_base = load_image(&bl2_to_bl31_args->bl32_meminfo,
- BL32_IMAGE_NAME,
- bl2_to_bl31_args->bl32_meminfo.attr &
- LOAD_MASK,
- BL32_BASE);
-
- if (bl32_base) {
- /* Fill BL32 image info */
- bl2_to_bl31_args->bl32_image_info.entrypoint = bl32_base;
- bl2_to_bl31_args->bl32_image_info.security_state = SECURE;
-
- /*
- * The Secure Payload Dispatcher service is responsible for
- * setting the SPSR prior to entry into the BL32 image.
- */
- bl2_to_bl31_args->bl32_image_info.spsr = 0;
+ if (bl2_to_bl31_plat_params->bl32_meminfo.total_size) {
+ e = load_image(&bl2_to_bl31_plat_params->bl32_meminfo,
+ BL32_IMAGE_NAME,
+ bl2_to_bl31_plat_params->bl32_meminfo.attr &
+ LOAD_MASK,
+ BL32_BASE,
+ bl2_to_bl31_params->bl32_image_info,
+ bl2_to_bl31_params->bl32_ep_info);
+
+ /* Halt if failed to load normal world firmware. */
+ if (e) {
+ WARN("Failed to load BL3-2.\n");
+ } else {
+ bl2_plat_set_bl32_ep_info(
+ bl2_to_bl31_params->bl32_image_info,
+ bl2_to_bl31_params->bl32_ep_info);
+ }
}
+
/*
* Run BL31 via an SMC to BL1. Information on how to pass control to
* the BL32 (if present) and BL33 software images will be passed to
* BL31 as an argument.
*/
- bl2_run_bl31(bl2_to_bl31_args, (unsigned long)bl2_to_bl31_args, 0);
+ bl2_run_bl31(bl31_ep_info, (unsigned long)bl2_to_bl31_params,
+ (unsigned long)bl2_to_bl31_plat_params);
}
diff --git a/bl31/aarch64/bl31_entrypoint.S b/bl31/aarch64/bl31_entrypoint.S
index 701bca3..c67d029 100644
--- a/bl31/aarch64/bl31_entrypoint.S
+++ b/bl31/aarch64/bl31_entrypoint.S
@@ -44,11 +44,11 @@
*/
func bl31_entrypoint
- /* ---------------------------------------------
- * Preceding bootloader has populated x0 with a
- * pointer to a 'bl31_args' structure & x1
- * with any other optional information
- * ---------------------------------------------
+ /* ---------------------------------------------------------------
+ * Preceding bootloader has populated x0 with a pointer to a
+ * 'bl31_params' structure & x1 with a pointer to platform
+ * specific structure
+ * ---------------------------------------------------------------
*/
mov x20, x0
mov x21, x1
diff --git a/bl31/bl31_main.c b/bl31/bl31_main.c
index 5a09829..d74b254 100644
--- a/bl31/bl31_main.c
+++ b/bl31/bl31_main.c
@@ -152,7 +152,7 @@ uint32_t bl31_get_next_image_type(void)
******************************************************************************/
void bl31_prepare_next_image_entry()
{
- el_change_info_t *next_image_info;
+ entry_point_info_t *next_image_info;
uint32_t scr, image_type;
/* Determine which image to execute next */
@@ -176,13 +176,13 @@ void bl31_prepare_next_image_entry()
* Tell the context mgmt. library to ensure that SP_EL3 points to
* the right context to exit from EL3 correctly.
*/
- cm_set_el3_eret_context(next_image_info->security_state,
- next_image_info->entrypoint,
+ cm_set_el3_eret_context(GET_SECURITY_STATE(next_image_info->h.attr),
+ next_image_info->pc,
next_image_info->spsr,
scr);
/* Finally set the next context */
- cm_set_next_eret_context(next_image_info->security_state);
+ cm_set_next_eret_context(GET_SECURITY_STATE(next_image_info->h.attr));
}
/*******************************************************************************
diff --git a/common/bl_common.c b/common/bl_common.c
index 4144ae5..a2fa2d6 100644
--- a/common/bl_common.c
+++ b/common/bl_common.c
@@ -35,6 +35,7 @@
#include <debug.h>
#include <io_storage.h>
#include <platform.h>
+#include <errno.h>
#include <stdio.h>
unsigned long page_align(unsigned long value, unsigned dir)
@@ -229,12 +230,15 @@ unsigned long image_size(const char *image_name)
* Generic function to load an image into the trusted RAM,
* given a name, extents of free memory & whether the image should be loaded at
* the bottom or top of the free memory. It updates the memory layout if the
- * load is successful.
+ * load is successful. It also updates the image information and the entry point
+ * information in the params passed
******************************************************************************/
-unsigned long load_image(meminfo_t *mem_layout,
+int load_image(meminfo_t *mem_layout,
const char *image_name,
unsigned int load_type,
- unsigned long fixed_addr)
+ unsigned long fixed_addr,
+ image_info_t *image_data,
+ entry_point_info_t *entry_point_info)
{
uintptr_t dev_handle;
uintptr_t image_handle;
@@ -248,13 +252,14 @@ unsigned long load_image(meminfo_t *mem_layout,
assert(mem_layout != NULL);
assert(image_name != NULL);
+ assert(image_data->h.version >= VERSION_1);
/* Obtain a reference to the image by querying the platform layer */
io_result = plat_get_image_source(image_name, &dev_handle, &image_spec);
if (io_result != IO_SUCCESS) {
WARN("Failed to obtain reference to image '%s' (%i)\n",
image_name, io_result);
- return 0;
+ return io_result;
}
/* Attempt to access the image */
@@ -262,7 +267,7 @@ unsigned long load_image(meminfo_t *mem_layout,
if (io_result != IO_SUCCESS) {
WARN("Failed to access image '%s' (%i)\n",
image_name, io_result);
- return 0;
+ return io_result;
}
/* Find the size of the image */
@@ -270,7 +275,7 @@ unsigned long load_image(meminfo_t *mem_layout,
if ((io_result != IO_SUCCESS) || (image_size == 0)) {
WARN("Failed to determine the size of the image '%s' file (%i)\n",
image_name, io_result);
- goto fail;
+ goto exit;
}
/* See if we have enough space */
@@ -278,7 +283,7 @@ unsigned long load_image(meminfo_t *mem_layout,
WARN("Cannot load '%s' file: Not enough space.\n",
image_name);
dump_load_info(0, image_size, mem_layout);
- goto fail;
+ goto exit;
}
switch (load_type) {
@@ -297,7 +302,8 @@ unsigned long load_image(meminfo_t *mem_layout,
WARN("Cannot load '%s' file: Not enough space.\n",
image_name);
dump_load_info(image_base, image_size, mem_layout);
- goto fail;
+ io_result = -ENOMEM;
+ goto exit;
}
/* Calculate the amount of extra memory used due to alignment */
@@ -315,10 +321,11 @@ unsigned long load_image(meminfo_t *mem_layout,
/* Page align base address and check whether the image still fits */
if (image_base + image_size >
mem_layout->free_base + mem_layout->free_size) {
- WARN("Cannot load '%s' file: Not enough space.\n",
- image_name);
- dump_load_info(image_base, image_size, mem_layout);
- goto fail;
+ WARN("Cannot load '%s' file: Not enough space.\n",
+ image_name);
+ dump_load_info(image_base, image_size, mem_layout);
+ io_result = -ENOMEM;
+ goto exit;
}
/* Calculate the amount of extra memory used due to alignment */
@@ -383,14 +390,16 @@ unsigned long load_image(meminfo_t *mem_layout,
WARN("Cannot load '%s' file: Not enough space.\n",
image_name);
dump_load_info(image_base, image_size, mem_layout);
- goto fail;
+ io_result = -ENOMEM;
+ goto exit;
}
/* Check whether the fixed load address is page-aligned. */
if (!is_page_aligned(image_base)) {
WARN("Cannot load '%s' file at unaligned address 0x%lx\n",
image_name, fixed_addr);
- goto fail;
+ io_result = -ENOMEM;
+ goto exit;
}
/*
@@ -440,9 +449,14 @@ unsigned long load_image(meminfo_t *mem_layout,
io_result = io_read(image_handle, image_base, image_size, &bytes_read);
if ((io_result != IO_SUCCESS) || (bytes_read < image_size)) {
WARN("Failed to load '%s' file (%i)\n", image_name, io_result);
- goto fail;
+ goto exit;
}
+ image_data->image_base = image_base;
+ image_data->image_size = image_size;
+
+ entry_point_info->pc = image_base;
+
/*
* File has been successfully loaded. Update the free memory
* data structure & flush the contents of the TZRAM so that
@@ -458,15 +472,12 @@ unsigned long load_image(meminfo_t *mem_layout,
mem_layout->free_base += offset + image_size;
exit:
- io_result = io_close(image_handle);
+ io_close(image_handle);
/* Ignore improbable/unrecoverable error in 'close' */
/* TODO: Consider maintaining open device connection from this bootloader stage */
- io_result = io_dev_close(dev_handle);
+ io_dev_close(dev_handle);
/* Ignore improbable/unrecoverable error in 'dev_close' */
- return image_base;
-
-fail: image_base = 0;
- goto exit;
+ return io_result;
}
diff --git a/include/bl2/bl2.h b/include/bl2/bl2.h
index 25b6f9c..5936d84 100644
--- a/include/bl2/bl2.h
+++ b/include/bl2/bl2.h
@@ -47,6 +47,32 @@ struct bl31_args;
*****************************************/
extern void bl2_platform_setup(void);
extern struct meminfo *bl2_plat_sec_mem_layout(void);
-extern struct bl31_args *bl2_get_bl31_args_ptr(void);
+
+/*******************************************************************************
+ * This function returns a pointer to the shared memory that the platform has
+ * kept aside to pass trusted firmware related information that BL3-1
+ * could need
+ ******************************************************************************/
+extern struct bl31_params *bl2_plat_get_bl31_params(void);
+
+/*******************************************************************************
+ * This function returns a pointer to the shared memory that the platform has
+ * kept aside to pass platform related information that BL3-1 could need
+ ******************************************************************************/
+extern struct bl31_plat_params *bl2_plat_get_bl31_plat_params(void);
+
+/*******************************************************************************
+ * This function returns a pointer to the shared memory that the platform
+ * has kept to point to entry point information of BL31 to BL2
+ ******************************************************************************/
+extern struct entry_point_info *bl2_plat_get_bl31_ep_info(void);
+
+
+/************************************************************************
+ * This function flushes to main memory all the params that are
+ * passed to BL3-1
+ **************************************************************************/
+extern void bl2_plat_flush_bl31_params(void);
+
#endif /* __BL2_H__ */
diff --git a/include/bl31/bl31.h b/include/bl31/bl31.h
index b60e32c..ad6e70e 100644
--- a/include/bl31/bl31.h
+++ b/include/bl31/bl31.h
@@ -42,7 +42,7 @@ extern unsigned long bl31_entrypoint;
* Forward declarations
*****************************************/
struct meminfo;
-struct el_change_info;
+struct entry_point_info;
/*******************************************************************************
* Function prototypes
@@ -52,7 +52,7 @@ extern void bl31_next_el_arch_setup(uint32_t security_state);
extern void bl31_set_next_image_type(uint32_t type);
extern uint32_t bl31_get_next_image_type(void);
extern void bl31_prepare_next_image_entry();
-extern struct el_change_info *bl31_get_next_image_info(uint32_t type);
+extern struct entry_point_info *bl31_get_next_image_info(uint32_t type);
extern void bl31_platform_setup(void);
extern struct meminfo *bl31_plat_get_bl32_mem_layout(void);
extern struct meminfo *bl31_plat_sec_mem_layout(void);
diff --git a/include/common/bl_common.h b/include/common/bl_common.h
index 72e2f6f..e3e4a43 100644
--- a/include/common/bl_common.h
+++ b/include/common/bl_common.h
@@ -31,8 +31,9 @@
#ifndef __BL_COMMON_H__
#define __BL_COMMON_H__
-#define SECURE 0
-#define NON_SECURE 1
+#define SECURE 0x0
+#define NON_SECURE 0x1
+#define PARAM_EP_SECURITY_MASK 0x1
#define UP 1
#define DOWN 0
@@ -58,15 +59,32 @@
/*******************************************************************************
* Constants that allow assembler code to access members of and the
- * 'el_change_info' structure at their correct offsets.
+ * 'entry_point_info' structure at their correct offsets.
******************************************************************************/
-#define EL_CHANGE_INFO_PC_OFFSET 0x0
-#define EL_CHANGE_INFO_ARGS_OFFSET 0x18
+#define ENTRY_POINT_INFO_PC_OFFSET 0x08
+#define ENTRY_POINT_INFO_ARGS_OFFSET 0x18
-#ifndef __ASSEMBLY__
+#define GET_SECURITY_STATE(x) (x & PARAM_EP_SECURITY_MASK)
+#define SET_SECURITY_STATE(x, security) \
+ ((x) = ((x) & ~PARAM_EP_SECURITY_MASK) | (security))
+
+#define PARAM_EP 0x01
+#define PARAM_IMAGE_BINARY 0x02
+#define PARAM_BL31 0x03
+
+#define VERSION_1 0x01
+#define SET_PARAM_HEAD(_p, _type, _ver, _attr) do { \
+ (_p)->h.type = (uint8_t)(_type); \
+ (_p)->h.version = (uint8_t)(_ver); \
+ (_p)->h.size = (uint16_t)sizeof(*_p); \
+ (_p)->h.attr = (uint32_t)(_attr) ; \
+ } while (0)
+
+#ifndef __ASSEMBLY__
#include <cdefs.h> /* For __dead2 */
#include <cassert.h>
+#include <stdint.h>
/*******************************************************************************
* Structure used for telling the next BL how much of a particular type of
@@ -92,50 +110,97 @@ typedef struct aapcs64_params {
unsigned long arg7;
} aapcs64_params_t;
-/*******************************************************************************
- * This structure represents the superset of information needed while switching
- * exception levels. The only two mechanisms to do so are ERET & SMC. In case of
- * SMC all members apart from 'aapcs64_params' will be ignored.
- * NOTE: BL1 expects entrypoint followed by spsr while processing SMC to jump
- * to BL31 from the start of el_change_info
- ******************************************************************************/
-typedef struct el_change_info {
- unsigned long entrypoint;
- unsigned long spsr;
- unsigned long security_state;
+/***************************************************************************
+ * This structure provides version information and the size of the
+ * structure, attributes for the structure it represents
+ ***************************************************************************/
+typedef struct param_header {
+ uint8_t type; /* type of the structure */
+ uint8_t version; /* version of this structure */
+ uint16_t size; /* size of this structure in bytes */
+ uint32_t attr; /* attributes: unused bits SBZ */
+} param_header_t;
+
+/*****************************************************************************
+ * This structure represents the superset of information needed while
+ * switching exception levels. The only two mechanisms to do so are
+ * ERET & SMC. Security state is indicated using bit zero of header
+ * attribute
+ * NOTE: BL1 expects entrypoint followed by spsr while processing
+ * SMC to jump to BL31 from the start of entry_point_info
+ *****************************************************************************/
+typedef struct entry_point_info {
+ param_header_t h;
+ uintptr_t pc;
+ uint32_t spsr;
aapcs64_params_t args;
-} el_change_info_t;
+} entry_point_info_t;
+
+/*****************************************************************************
+ * Image info binary provides information from the image loader that
+ * can be used by the firmware to manage available trusted RAM.
+ * More advanced firmware image formats can provide additional
+ * information that enables optimization or greater flexibility in the
+ * common firmware code
+ *****************************************************************************/
+typedef struct image_info {
+ param_header_t h;
+ uintptr_t image_base; /* physical address of base of image */
+ uint32_t image_size; /* bytes read from image file */
+} image_info_t;
/*******************************************************************************
* This structure represents the superset of information that can be passed to
* BL31 e.g. while passing control to it from BL2. The BL32 parameters will be
- * populated only if BL2 detects its presence.
+ * populated only if BL2 detects its presence. A pointer to a structure of this
+ * type should be passed in X3 to BL31's cold boot entrypoint
+ *
+ * Use of this structure and the X3 parameter is not mandatory: the BL3-1
+ * platform code can use other mechanisms to provide the necessary information
+ * about BL3-2 and BL3-3 to the common and SPD code.
+ *
+ * BL3-1 image information is mandatory if this structure is used. If either of
+ * the optional BL3-2 and BL3-3 image information is not provided, this is
+ * indicated by the respective image_info pointers being zero.
******************************************************************************/
-typedef struct bl31_args {
- el_change_info_t bl31_image_info;
+typedef struct bl31_params {
+ param_header_t h;
+ image_info_t *bl31_image_info;
+ entry_point_info_t *bl32_ep_info;
+ image_info_t *bl32_image_info;
+ entry_point_info_t *bl33_ep_info;
+ image_info_t *bl33_image_info;
+} bl31_params_t;
+
+
+/***************************************************************************
+ * This structure provides platform specific data that needs to be known to
+ * BL31. Currently, The loader updates the memory information available for
+ * each binary
+ ***************************************************************************/
+typedef struct bl31_plat_params {
meminfo_t bl31_meminfo;
- el_change_info_t bl32_image_info;
meminfo_t bl32_meminfo;
- el_change_info_t bl33_image_info;
meminfo_t bl33_meminfo;
-} bl31_args_t;
+} bl31_plat_params_t;
/*
- * Compile time assertions related to the 'el_change_info' structure to
+ * Compile time assertions related to the 'entry_point_info' structure to
* ensure that the assembler and the compiler view of the offsets of
* the structure members is the same.
*/
-CASSERT(EL_CHANGE_INFO_PC_OFFSET == \
- __builtin_offsetof(el_change_info_t, entrypoint), \
- assert_BL31_pc_offset_mismatch);
+CASSERT(ENTRY_POINT_INFO_PC_OFFSET ==
+ __builtin_offsetof(entry_point_info_t, pc), \
+ assert_BL31_pc_offset_mismatch);
-CASSERT(EL_CHANGE_INFO_ARGS_OFFSET == \
- __builtin_offsetof(el_change_info_t, args), \
+CASSERT(ENTRY_POINT_INFO_ARGS_OFFSET == \
+ __builtin_offsetof(entry_point_info_t, args), \
assert_BL31_args_offset_mismatch);
-CASSERT(sizeof(unsigned long) == __builtin_offsetof(el_change_info_t, spsr) - \
- __builtin_offsetof(el_change_info_t, entrypoint), \
+CASSERT(sizeof(unsigned long) ==
+ __builtin_offsetof(entry_point_info_t, spsr) - \
+ __builtin_offsetof(entry_point_info_t, pc), \
assert_entrypoint_and_spsr_should_be_adjacent);
/*******************************************************************************
@@ -151,10 +216,12 @@ extern void init_bl31_mem_layout(const meminfo_t *,
meminfo_t *,
unsigned int) __attribute__((weak));
extern unsigned long image_size(const char *);
-extern unsigned long load_image(meminfo_t *,
+extern int load_image(meminfo_t *,
const char *,
unsigned int,
- unsigned long);
+ unsigned long,
+ image_info_t *,
+ entry_point_info_t *);
extern unsigned long *get_el_change_mem_ptr(void);
extern const char build_message[];
diff --git a/plat/fvp/bl1_plat_setup.c b/plat/fvp/bl1_plat_setup.c
index edd3f7b..ac3b69a 100644
--- a/plat/fvp/bl1_plat_setup.c
+++ b/plat/fvp/bl1_plat_setup.c
@@ -144,3 +144,17 @@ void bl1_plat_arch_setup(void)
BL1_COHERENT_RAM_BASE,
BL1_COHERENT_RAM_LIMIT);
}
+
+
+/*******************************************************************************
+ * Before calling this function BL2 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL2 and set SPSR and security state.
+ * On FVP we are only setting the security state, entrypoint
+ ******************************************************************************/
+void bl1_plat_set_bl2_ep_info(image_info_t *bl2_image,
+ entry_point_info_t *bl2_ep)
+{
+ SET_SECURITY_STATE(bl2_ep->h.attr, SECURE);
+ bl2_ep->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+}
diff --git a/plat/fvp/bl2_plat_setup.c b/plat/fvp/bl2_plat_setup.c
index ddd3b01..1eb8001 100644
--- a/plat/fvp/bl2_plat_setup.c
+++ b/plat/fvp/bl2_plat_setup.c
@@ -34,6 +34,7 @@
#include <bl2.h>
#include <console.h>
#include <platform.h>
+#include <string.h>
/*******************************************************************************
* Declarations of linker defined symbols which will help us find the layout
@@ -73,10 +74,12 @@ __attribute__ ((aligned(PLATFORM_CACHE_LINE_SIZE),
section("tzfw_coherent_mem")));
/*******************************************************************************
- * Reference to structure which holds the arguments which need to be passed
+ * Reference to structures which holds the arguments which need to be passed
* to BL31
******************************************************************************/
-static bl31_args_t *bl2_to_bl31_args;
+static bl31_params_t *bl2_to_bl31_params;
+static bl31_plat_params_t *bl2_to_bl31_plat_params;
+static entry_point_info_t *bl31_ep_info;
meminfo_t *bl2_plat_sec_mem_layout(void)
{
@@ -84,14 +87,104 @@ meminfo_t *bl2_plat_sec_mem_layout(void)
}
/*******************************************************************************
+ * This function assigns a pointer to the memory that the platform has kept
+ * aside to pass platform specific and trusted firmware related information
+ * to BL31. This memory is allocated by allocating memory to
+ * bl2_to_bl31_params_mem_t structure which is a superset of all the
+ * structure whose information is passed to BL31
+ * NOTE: This function should be called only once and should be done
+ * before generating params to BL31
+ ******************************************************************************/
+bl31_params_t *bl2_plat_get_bl31_params(void)
+{
+ bl2_to_bl31_params_mem_t *bl31_params_mem;
+
+ /*
+ * Ensure that the secure DRAM memory used for passing BL31 arguments
+ * does not overlap with the BL32_BASE.
+ */
+ assert(BL32_BASE > PARAMS_BASE + sizeof(bl2_to_bl31_params_mem_t));
+
+ /*
+ * Allocate the memory for all the arguments that needs to
+ * be passed to BL31
+ */
+ bl31_params_mem = (bl2_to_bl31_params_mem_t *)PARAMS_BASE;
+ memset((void *)PARAMS_BASE, 0, sizeof(bl2_to_bl31_params_mem_t));
+
+ /* Assign memory for TF related information */
+ bl2_to_bl31_params = &bl31_params_mem->bl31_params;
+ SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
+
+ /* Assign memory for platform specific information */
+ bl2_to_bl31_plat_params = &bl31_params_mem->bl31_plat_params;
+
+ /* Fill BL31 related information */
+ bl31_ep_info = &bl31_params_mem->bl31_ep_info;
+ bl2_to_bl31_params->bl31_image_info = &bl31_params_mem->bl31_image_info;
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
+ VERSION_1, 0);
+
+ /* Fill BL32 related information if it exists */
+ if (BL32_BASE) {
+ bl2_to_bl31_params->bl32_ep_info =
+ &bl31_params_mem->bl32_ep_info;
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info,
+ PARAM_EP, VERSION_1, 0);
+ bl2_to_bl31_params->bl32_image_info =
+ &bl31_params_mem->bl32_image_info;
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info,
+ PARAM_IMAGE_BINARY,
+ VERSION_1, 0);
+ /*
+ * Populate the extents of memory available for loading BL32.
+ * TODO: We are temporarily executing BL2 from TZDRAM;
+ * will eventually move to Trusted SRAM
+ */
+ bl2_to_bl31_plat_params->bl32_meminfo.total_base = BL32_BASE;
+ bl2_to_bl31_plat_params->bl32_meminfo.free_base = BL32_BASE;
+ bl2_to_bl31_plat_params->bl32_meminfo.total_size =
+ (TZDRAM_BASE + TZDRAM_SIZE) - BL32_BASE;
+ bl2_to_bl31_plat_params->bl32_meminfo.free_size =
+ (TZDRAM_BASE + TZDRAM_SIZE) - BL32_BASE;
+ bl2_to_bl31_plat_params->bl32_meminfo.attr = BOT_LOAD;
+ }
+
+ /* Fill BL33 related information */
+ bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem->bl33_ep_info;
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
+ PARAM_EP, VERSION_1, 0);
+ bl2_to_bl31_params->bl33_image_info = &bl31_params_mem->bl33_image_info;
+ SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
+ VERSION_1, 0);
+ /* Populate the extents of memory available for loading BL33 */
+ bl2_to_bl31_plat_params->bl33_meminfo.total_base = DRAM_BASE;
+ bl2_to_bl31_plat_params->bl33_meminfo.total_size = DRAM_SIZE;
+ bl2_to_bl31_plat_params->bl33_meminfo.free_base = DRAM_BASE;
+ bl2_to_bl31_plat_params->bl33_meminfo.free_size = DRAM_SIZE;
+
+ return bl2_to_bl31_params;
+}
+
+/*******************************************************************************
* This function returns a pointer to the memory that the platform has kept
- * aside to pass all the information that BL31 could need.
+ * aside to pass platform related information that BL31 could need
+ ******************************************************************************/
+bl31_plat_params_t *bl2_plat_get_bl31_plat_params(void)
+{
+ return bl2_to_bl31_plat_params;
+}
+
+/*******************************************************************************
+ * This function returns a pointer to the shared memory that the platform
+ * has kept to point to entry point information of BL31 to BL2
******************************************************************************/
-bl31_args_t *bl2_get_bl31_args_ptr(void)
+struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
{
- return bl2_to_bl31_args;
+ return bl31_ep_info;
}
+
/*******************************************************************************
* BL1 has passed the extents of the trusted SRAM that should be visible to BL2
* in x0. This memory layout is sitting at the base of the free trusted SRAM.
@@ -118,7 +211,7 @@ void bl2_early_platform_setup(meminfo_t *mem_layout)
* Perform platform specific setup. For now just initialize the memory location
* to use for passing arguments to BL31.
******************************************************************************/
-void bl2_platform_setup()
+void bl2_platform_setup(void)
{
/*
* Do initial security configuration to allow DRAM/device access. On
@@ -130,41 +223,16 @@ void bl2_platform_setup()
/* Initialise the IO layer and register platform IO devices */
io_setup();
+}
- /*
- * Ensure that the secure DRAM memory used for passing BL31 arguments
- * does not overlap with the BL32_BASE.
- */
- assert (BL32_BASE > TZDRAM_BASE + sizeof(bl31_args_t));
-
- /* Use the Trusted DRAM for passing args to BL31 */
- bl2_to_bl31_args = (bl31_args_t *) TZDRAM_BASE;
-
- /* Populate the extents of memory available for loading BL33 */
- bl2_to_bl31_args->bl33_meminfo.total_base = DRAM_BASE;
- bl2_to_bl31_args->bl33_meminfo.total_size = DRAM_SIZE;
- bl2_to_bl31_args->bl33_meminfo.free_base = DRAM_BASE;
- bl2_to_bl31_args->bl33_meminfo.free_size = DRAM_SIZE;
- bl2_to_bl31_args->bl33_meminfo.attr = 0;
- bl2_to_bl31_args->bl33_meminfo.next = 0;
-
- /*
- * Populate the extents of memory available for loading BL32.
- * TODO: We are temporarily executing BL2 from TZDRAM; will eventually
- * move to Trusted SRAM
- */
- bl2_to_bl31_args->bl32_meminfo.total_base = BL32_BASE;
- bl2_to_bl31_args->bl32_meminfo.free_base = BL32_BASE;
-
- bl2_to_bl31_args->bl32_meminfo.total_size =
- (TZDRAM_BASE + TZDRAM_SIZE) - BL32_BASE;
- bl2_to_bl31_args->bl32_meminfo.free_size =
- (TZDRAM_BASE + TZDRAM_SIZE) - BL32_BASE;
-
- bl2_to_bl31_args->bl32_meminfo.attr = BOT_LOAD;
- bl2_to_bl31_args->bl32_meminfo.next = 0;
+/* Flush the TF params and the TF plat params */
+void bl2_plat_flush_bl31_params(void)
+{
+ flush_dcache_range((unsigned long)PARAMS_BASE, \
+ sizeof(bl2_to_bl31_params_mem_t));
}
+
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this is only intializes the mmu in a quick and dirty way.
@@ -177,3 +245,66 @@ void bl2_plat_arch_setup()
BL2_COHERENT_RAM_BASE,
BL2_COHERENT_RAM_LIMIT);
}
+
+/*******************************************************************************
+ * Before calling this function BL31 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL31 and set SPSR and security state.
+ * On FVP we are only setting the security state, entrypoint
+ ******************************************************************************/
+void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
+ entry_point_info_t *bl31_ep_info)
+{
+ SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
+ bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS);
+}
+
+
+/*******************************************************************************
+ * Before calling this function BL32 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL32 and set SPSR and security state.
+ * On FVP we are only setting the security state, entrypoint
+ ******************************************************************************/
+void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
+ entry_point_info_t *bl32_ep_info)
+{
+ SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
+ /*
+ * The Secure Payload Dispatcher service is responsible for
+ * setting the SPSR prior to entry into the BL32 image.
+ */
+ bl32_ep_info->spsr = 0;
+}
+
+/*******************************************************************************
+ * Before calling this function BL33 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL33 and set SPSR and security state.
+ * On FVP we are only setting the security state, entrypoint
+ ******************************************************************************/
+void bl2_plat_set_bl33_ep_info(image_info_t *image,
+ entry_point_info_t *bl33_ep_info)
+{
+ unsigned long el_status;
+ unsigned int mode;
+
+ /* Figure out what mode we enter the non-secure world in */
+ el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
+ el_status &= ID_AA64PFR0_ELX_MASK;
+
+ if (el_status)
+ mode = MODE_EL2;
+ else
+ mode = MODE_EL1;
+
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+ bl33_ep_info->spsr = SPSR_64(mode, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS);
+ SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
+}
diff --git a/plat/fvp/bl31_plat_setup.c b/plat/fvp/bl31_plat_setup.c
index baf7df1..83072e4 100644
--- a/plat/fvp/bl31_plat_setup.c
+++ b/plat/fvp/bl31_plat_setup.c
@@ -29,6 +29,7 @@
*/
#include <arch.h>
+#include <assert.h>
#include <bl_common.h>
#include <bl31.h>
#include <console.h>
@@ -70,34 +71,35 @@ extern unsigned long __COHERENT_RAM_END__;
* Reference to structure which holds the arguments that have been passed to
* BL31 from BL2.
******************************************************************************/
-static bl31_args_t *bl2_to_bl31_args;
+static bl31_params_t *bl2_to_bl31_params;
+static bl31_plat_params_t *bl2_to_bl31_plat_params;
meminfo_t *bl31_plat_sec_mem_layout(void)
{
- return &bl2_to_bl31_args->bl31_meminfo;
+ return &bl2_to_bl31_plat_params->bl31_meminfo;
}
meminfo_t *bl31_plat_get_bl32_mem_layout(void)
{
- return &bl2_to_bl31_args->bl32_meminfo;
+ return &bl2_to_bl31_plat_params->bl32_meminfo;
}
/*******************************************************************************
- * Return a pointer to the 'el_change_info' structure of the next image for the
+ * Return a pointer to the 'entry_point_info' structure of the next image for the
* security state specified. BL33 corresponds to the non-secure image type
* while BL32 corresponds to the secure image type. A NULL pointer is returned
* if the image does not exist.
******************************************************************************/
-el_change_info_t *bl31_get_next_image_info(uint32_t type)
+entry_point_info_t *bl31_get_next_image_info(uint32_t type)
{
- el_change_info_t *next_image_info;
+ entry_point_info_t *next_image_info;
next_image_info = (type == NON_SECURE) ?
- &bl2_to_bl31_args->bl33_image_info :
- &bl2_to_bl31_args->bl32_image_info;
+ bl2_to_bl31_params->bl33_ep_info :
+ bl2_to_bl31_params->bl32_ep_info;
/* None of the images on this platform can have 0x0 as the entrypoint */
- if (next_image_info->entrypoint)
+ if (next_image_info->pc)
return next_image_info;
else
return NULL;
@@ -114,10 +116,15 @@ el_change_info_t *bl31_get_next_image_info(uint32_t type)
* has flushed this information to memory, so we are guaranteed to pick up good
* data
******************************************************************************/
-void bl31_early_platform_setup(bl31_args_t *from_bl2,
- void *data)
+void bl31_early_platform_setup(bl31_params_t *from_bl2,
+ bl31_plat_params_t *plat_info_from_bl2)
{
- bl2_to_bl31_args = from_bl2;
+ assert(from_bl2->h.type == PARAM_BL31);
+ assert(from_bl2->h.version >= VERSION_1);
+
+ bl2_to_bl31_params = from_bl2;
+ bl2_to_bl31_plat_params = plat_info_from_bl2;
+
/* Initialize the console to provide early debug support */
console_init(PL011_UART0_BASE);
@@ -172,7 +179,7 @@ void bl31_platform_setup()
******************************************************************************/
void bl31_plat_arch_setup()
{
- configure_mmu_el3(&bl2_to_bl31_args->bl31_meminfo,
+ configure_mmu_el3(&bl2_to_bl31_plat_params->bl31_meminfo,
BL31_RO_BASE,
BL31_RO_LIMIT,
BL31_COHERENT_RAM_BASE,
diff --git a/plat/fvp/platform.h b/plat/fvp/platform.h
index 40f780e..85a74bc 100644
--- a/plat/fvp/platform.h
+++ b/plat/fvp/platform.h
@@ -134,6 +134,10 @@
#define TZDRAM_SIZE 0x02000000
#define MBOX_OFF 0x1000
+/* Base address where parameters to BL31 are stored */
+#define PARAMS_BASE TZDRAM_BASE
+
+
#define DRAM_BASE 0x80000000ull
#define DRAM_SIZE 0x80000000ull
@@ -339,7 +343,7 @@
#ifndef __ASSEMBLY__
#include <stdint.h>
-
+#include <bl_common.h>
typedef volatile struct mailbox {
unsigned long value
@@ -351,6 +355,28 @@ typedef volatile struct mailbox {
******************************************************************************/
struct plat_pm_ops;
struct meminfo;
+struct bl31_params;
+struct bl31_plat_params;
+struct image_info;
+struct entry_point_info;
+
+
+/*******************************************************************************
+ * This structure represents the superset of information that is passed to
+ * BL31 e.g. while passing control to it from BL2 which is bl31_params
+ * and bl31_plat_params and its elements
+ ******************************************************************************/
+typedef struct bl2_to_bl31_params_mem {
+ struct bl31_params bl31_params;
+ struct bl31_plat_params bl31_plat_params;
+ struct image_info bl31_image_info;
+ struct image_info bl32_image_info;
+ struct image_info bl33_image_info;
+ struct entry_point_info bl33_ep_info;
+ struct entry_point_info bl32_ep_info;
+ struct entry_point_info bl31_ep_info;
+} bl2_to_bl31_params_mem_t;
+
/*******************************************************************************
* Function and variable prototypes
@@ -412,6 +438,42 @@ extern int plat_get_image_source(const char *image_name,
/* Declarations for plat_security.c */
extern void plat_security_setup(void);
+/*
+ * Before calling this function BL2 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL2 and set SPSR and security state.
+ * On FVP we are only setting the security state, entrypoint
+ */
+extern void bl1_plat_set_bl2_ep_info(struct image_info *image,
+ struct entry_point_info *ep);
+
+/*
+ * Before calling this function BL31 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL31 and set SPSR and security state.
+ * On FVP we are only setting the security state, entrypoint
+ */
+extern void bl2_plat_set_bl31_ep_info(struct image_info *image,
+ struct entry_point_info *ep);
+
+/*
+ * Before calling this function BL32 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL32 and set SPSR and security state.
+ * On FVP we are only setting the security state, entrypoint
+ */
+extern void bl2_plat_set_bl32_ep_info(struct image_info *image,
+ struct entry_point_info *ep);
+
+/*
+ * Before calling this function BL33 is loaded in memory and its entrypoint
+ * is set by load_image. This is a placeholder for the platform to change
+ * the entrypoint of BL33 and set SPSR and security state.
+ * On FVP we are only setting the security state, entrypoint
+ */
+extern void bl2_plat_set_bl33_ep_info(struct image_info *image,
+ struct entry_point_info *ep);
+
#endif /*__ASSEMBLY__*/
diff --git a/services/spd/tspd/tspd_main.c b/services/spd/tspd/tspd_main.c
index 9fda307..15f7ffe 100644
--- a/services/spd/tspd/tspd_main.c
+++ b/services/spd/tspd/tspd_main.c
@@ -76,7 +76,7 @@ int32_t tspd_init(meminfo_t *bl32_meminfo);
******************************************************************************/
int32_t tspd_setup(void)
{
- el_change_info_t *image_info;
+ entry_point_info_t *image_info;
int32_t rc;
uint64_t mpidr = read_mpidr();
uint32_t linear_id;
@@ -96,7 +96,7 @@ int32_t tspd_setup(void)
* signalling failure initializing the service. We bail out without
* registering any handlers
*/
- if (!image_info->entrypoint)
+ if (!image_info->pc)
return 1;
/*
@@ -104,7 +104,7 @@ int32_t tspd_setup(void)
* state i.e whether AArch32 or AArch64. Assuming it's AArch64
* for the time being.
*/
- rc = tspd_init_secure_context(image_info->entrypoint,
+ rc = tspd_init_secure_context(image_info->pc,
TSP_AARCH64,
mpidr,
&tspd_sp_context[linear_id]);